Mini Cooper "toy" to awesome machine

You drive it, you document it. Story of the day's activities. As always, video is better!

Moderator: Moderators

Forum rules
Members are encouraged to start and keep a single thread for all their RC driving exploits. Alternatively you may start a thread per vehicle. If you wish to post a one-off thread about a particular event you can, but please link to it in your normal thread, and vice versa.
Post Reply
west0618
Member
Member
Posts: 115
Joined: Mon Feb 02, 2015 10:40 pm
Location: Fort Wayne, Indiana USA

Mini Cooper "toy" to awesome machine

Post by west0618 »

After completing this conversion several weeks ago, as shown in member builds, Derek had still not seen it run in person so I included it when I loaded up the car for today's outing of planes, helicopters, boat and "car". For this posting there seemed no reason to trim out anything as you folks seem to enjoy our banter. And there is plenty of that. When I ran it solo it is harder(impossible) to get such video. There is still a complete interior in this car and yes, there is a cute brunet driving with functioning seat belts in place.(as shown below the video)

Enjoy. I updated the video to include some captions.

https://www.youtube.com/watch?v=SIfBkhb ... e=youtu.be
CY-28989.jpg
CY-28989.jpg (103.13 KiB) Viewed 5235 times
Last edited by west0618 on Thu Jul 30, 2015 10:24 pm, edited 1 time in total.
User avatar
pvolcko
Site Admin
Site Admin
Posts: 2197
Joined: Thu Nov 06, 2014 3:18 pm
Location: Syracuse, NY
Contact:

Re: Mini Cooper "toy" to awesome machine

Post by pvolcko »

Drift car? :)
Paul Volcko
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: Mini Cooper "toy" to awesome machine

Post by Tony »

Wow, an awesome car. Nice one
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
User avatar
DOG
Member
Member
Posts: 1786
Joined: Fri Mar 06, 2015 4:03 am
Location: Inverness Florida

Re: Mini Cooper "toy" to awesome machine

Post by DOG »

Nice little car to drive while the birds are cooling off. Good Idea.
HK 500 DFC
Gaui X3L
Tarot 450DFC scale/Coastguard
Fossil 180
Fossil 210
Citizen member #00748
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: Mini Cooper "toy" to awesome machine

Post by Derek »

Thanks DOG! I'm gonna tell you something that you probably won't believe. That car weighs nearly 9lbs, lol. It weighs more than my Trex 600 Pro DFC, lol, but the upgrades that Dad did to it are fantastic and he's quite happy with the results.
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
User avatar
Stambo
Member
Member
Posts: 1349
Joined: Thu Nov 20, 2014 7:13 pm
Location: Whangarei New Zealand

Re: Mini Cooper "toy" to awesome machine

Post by Stambo »

Nice, now chuck some FPV gear on it for him. :)
RCX 250 Minquad FPV addiction
500 X quad FPV/AP platform
450 X quad set up for night flight
Multiple WLToys V911, V949, V959
Taranis, Turnigy 9X
Fatshark Predator, Immersion 5800 Duo
Trex 500 Esky Belt CP V2
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: Mini Cooper "toy" to awesome machine

Post by Derek »

Stambo wrote:Nice, now chuck some FPV gear on it for him. :)
FPV on that Mini would be a lot of fun with one exception. There is NO suspension on it at all. It's a very rigid and solid frame and I think every single bump would bounce the fpv cam all over the place. But....it would be a good deal of fun!!!
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
User avatar
Lee
Moderator
Moderator
Posts: 1824
Joined: Fri Nov 07, 2014 6:16 pm
Location: Tarifa, Spain

Re: Mini Cooper "toy" to awesome machine

Post by Lee »

Nice ride :D
GOBLIN 570------IKON
WARP 360--------IKON
QAV 500----------Open Pilot
RCXH250---------Open Pilot


Citizen #229
User avatar
Graham Lawrie
Moderator
Moderator
Posts: 5049
Joined: Thu Nov 06, 2014 7:14 pm
Location: Kinlochleven, Scotland
Contact:

Re: Mini Cooper "toy" to awesome machine

Post by Graham Lawrie »

NIce one:)
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius




CITIZEN # 521
User avatar
Stambo
Member
Member
Posts: 1349
Joined: Thu Nov 20, 2014 7:13 pm
Location: Whangarei New Zealand

Re: Mini Cooper "toy" to awesome machine

Post by Stambo »

Derek wrote:
Stambo wrote:Nice, now chuck some FPV gear on it for him. :)
FPV on that Mini would be a lot of fun with one exception. There is NO suspension on it at all. It's a very rigid and solid frame and I think every single bump would bounce the fpv cam all over the place. But....it would be a good deal of fun!!!
Found the same when I put FPV on my modded 350z nissan.
Very bouncy but it was fun.
Once I found a smoother surface to try it on it was much better.
RCX 250 Minquad FPV addiction
500 X quad FPV/AP platform
450 X quad set up for night flight
Multiple WLToys V911, V949, V959
Taranis, Turnigy 9X
Fatshark Predator, Immersion 5800 Duo
Trex 500 Esky Belt CP V2
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: Mini Cooper "toy" to awesome machine

Post by Tony »

Done the same with my tank if you recall. Bumpy but great fun nevertheless..
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
west0618
Member
Member
Posts: 115
Joined: Mon Feb 02, 2015 10:40 pm
Location: Fort Wayne, Indiana USA

Re: Mini Cooper "toy" to awesome machine

Post by west0618 »

I learned decades ago to never say NEVER. Currently I have no plans to invest in a FPV system but after watching this...you never know what next year may bring. As Derek pointed out, this Mini Cooper currently has NO suspension at all. And, looking at this video, I can see that the wind screen was definitely NOT made to be looked through. Between the scratches, distortion and the muting of the colors in the video it could be improved...a bit. But still I was pleasantly impressed. I could easily see setting up a course with orange cones and such and making a run at it. This car was once a well used, sad "toy" but now can literally run circles around most anything at Walmart. This video was shot with the 720P Action Camera. 1 minute 40 seconds long.

https://www.youtube.com/watch?v=0WWGa1j ... e=youtu.be
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: Mini Cooper "toy" to awesome machine

Post by Derek »

Fun little video, Dad!!
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
User avatar
Graham Lawrie
Moderator
Moderator
Posts: 5049
Joined: Thu Nov 06, 2014 7:14 pm
Location: Kinlochleven, Scotland
Contact:

Re: Mini Cooper "toy" to awesome machine

Post by Graham Lawrie »

Very cool pops:)
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius




CITIZEN # 521
User avatar
ken jackson
Member
Member
Posts: 280
Joined: Sat Nov 08, 2014 1:17 am
Location: Chesterton, Indiana

Re: Mini Cooper "toy" to awesome machine

Post by ken jackson »

You guys have too much fun, hope my son and I can do some of this once he gets out of college and probably the air force.

ken
48" Edge 540T
Alien RR5
TRex 500 DFC w IKON
AS3X A10
VisionAire Flying Fine
Carbon-Z Yak 54 3x Amazing Plane
Flying Since October 2011 DX8 and Phoenix Simulator
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: Mini Cooper "toy" to awesome machine

Post by Derek »

Thanks Ken! This Mini Cooper isn't the same machine that it once was, lol. It began as a "toy-grade" car and now it's quite fast. Dad will surely have to replace the tires next year, lol.
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
Post Reply

Return to “Member Logs”