Page 1 of 1

Gerald's Scratch build Float plane " SPLASH"

Posted: Sun May 22, 2016 3:56 am
by Vipertech13
My flying club has float fly event scheduled for 3 weeks from today so I have been working on a scratch built float or sea plane which ever way you want to name it. I am using my normal boxy fuselage 30" long with a KFM 3 wing 40" wingspan and 7" cord with about maybe 4 deg. dihedral. Power plant is a Turnigy D2836/9 950Kv on 2200 Mah 3s battery, swinging a 11x6 Master airscrew prop. Setup pulls 21.3 amps and 240 watts @ full throttle. I am making the floats out of insulation foam board and will be covering them with tape to waterproof them. So here are a few pictures of the progress.

I start with the basic float idea
Basic floats
Basic floats
IMG00006.JPG (746.42 KiB) Viewed 7901 times
I made the supports from aluminum carpet edging I had from a house project
Supports for the floats
Supports for the floats
IMG00008.JPG (731.04 KiB) Viewed 7901 times
Here is the fuselage in it's final shape before covering and test fitting it on the floats
Fuselage test fit
Fuselage test fit
IMG00009.JPG (724.56 KiB) Viewed 7901 times
Now the rudder and elevator
Rudder and elevator test fit
Rudder and elevator test fit
IMG00011.JPG (732.36 KiB) Viewed 7901 times
Here is the wing almost finished, still need to add servos. The chrome strip on the wing is actually a kevlar fabric we use at work to protect wire harnesses from heat sources it is adhesive backed and I had some left over from a job, in fact, enough to add a strip on the bottom of the wing and it really stiffened it up.
wing and fuse test fitting
wing and fuse test fitting
IMG00027.JPG (682.76 KiB) Viewed 7901 times
I am working out the final CG location as I need to know it to properly position the floats, once all that is worked out i will be carving the floats down to the needed shape and we'll see what happens!
Final test for float placement
Final test for float placement
IMG00028.JPG (715.1 KiB) Viewed 7901 times
I accidentally made the perfect location for the Rx under the wing! I like it when stuff works out like this, it almost looks like I know what I'm doing :lol:
Rx location
Rx location
IMG00023.JPG (753.68 KiB) Viewed 7901 times
And a few more pictures
IMG00024.JPG
IMG00024.JPG (845.16 KiB) Viewed 7901 times
IMG00025.JPG
IMG00025.JPG (707.73 KiB) Viewed 7901 times
IMG00031.JPG
IMG00031.JPG (735.34 KiB) Viewed 7901 times
The way it's been raining around here this year :evil: This might be my most practical plane! :lol:

Re: Gerald's Scratch build Float plane " SPLASH"

Posted: Sun May 22, 2016 5:16 am
by Derek
That's really fantastic, Gerald! Looks awesome!

Re: Gerald's Scratch build Float plane " SPLASH"

Posted: Sun May 22, 2016 6:59 am
by Graham Lawrie
Looking good Gerald:)

Re: Gerald's Scratch build Float plane " SPLASH"

Posted: Sun May 22, 2016 7:25 am
by Lee
Nice job Gerald.

Re: Gerald's Scratch build Float plane " SPLASH"

Posted: Sun May 22, 2016 12:53 pm
by cml001
I likie!

Progress report

Posted: Sun May 29, 2016 4:57 am
by Vipertech13
I have the final shape of the floats carved out and the wood laid into the foam. I did a test assembly and Cg check and all is well now just need to cover the floats and come up with a water rudder system. Also need to get the aileron servos installed.
IMG00033.JPG
IMG00033.JPG (635.8 KiB) Viewed 7875 times
IMG00035.JPG
IMG00035.JPG (736.64 KiB) Viewed 7875 times
IMG00036.JPG
IMG00036.JPG (749.03 KiB) Viewed 7875 times

Re: Gerald's Scratch build Float plane " SPLASH"

Posted: Sun May 29, 2016 10:54 am
by Derek
WOW! That really looks great!!!

Re: Gerald's Scratch build Float plane " SPLASH"

Posted: Thu Jun 09, 2016 3:32 am
by Vipertech13
Holy cow! The float fly is Saturday and I still don't have this bird ready!
I have the floats covered now and made a water rudder .
covered floats
covered floats
IMG00055.JPG (766.76 KiB) Viewed 7800 times
rudder
rudder
IMG00053.JPG (682.24 KiB) Viewed 7800 times
I filled the tub and set her in!
IT FLOATS!
sitting in the tub
sitting in the tub
DSCF7697.JPG (3.72 MiB) Viewed 7800 times
The rulers and hot glue stick represent the wing weight and it has the 2200 3s battery setting in it, all up weight 2.25lbs, I am totally pumped at how it sets in the water, looks exactly right. The rear of the floats are just in the water and the front of the floats are just above.
water rudder
water rudder
DSCF7700.JPG (3.75 MiB) Viewed 7800 times
Man it looks cool! I hope it flies well!
setting
setting
DSCF7703.JPG (3.68 MiB) Viewed 7800 times
Just some work to do on the ailerons and some sealing to do and I am ready for the lake! :D

Re: Gerald's Scratch build Float plane " SPLASH"

Posted: Thu Jun 09, 2016 12:35 pm
by Derek
Gerald...that really really looks great! I'm looking forward to seeing some flight video of this plane!

Re: Gerald's Scratch build Float plane " SPLASH"

Posted: Thu Jun 09, 2016 8:33 pm
by DOG
Excellent job you have done there Gerald 8-) . I wish you good luck on your first flight. Hope everything goes well and if you can, a video will be nice to see this bird in action.

Re: Gerald's Scratch build Float plane " SPLASH"

Posted: Thu Jun 09, 2016 10:25 pm
by cml001
I wanna see it take off & land!

Re: Gerald's Scratch build Float plane " SPLASH"

Posted: Fri Jun 10, 2016 4:56 pm
by Vipertech13
I found a transporter to match my float plane! :D
AND it matches colors! :lol:
plane transporter
plane transporter
0610160932-00.jpg (332.3 KiB) Viewed 7779 times
0610160932-01.jpg
0610160932-01.jpg (329.36 KiB) Viewed 7779 times

Re: Gerald's Scratch build Float plane " SPLASH"

Posted: Sat Jun 11, 2016 9:19 am
by Graham Lawrie
Very Very nice:)

Re: Gerald's Scratch build Float plane " SPLASH"

Posted: Sun Jun 12, 2016 4:38 am
by Vipertech13
Well sorry to report that my video camera failed, I got no footage at all! Had trouble from the start, Crazy windy steady 10 mph and 18 mph gusts, the plane was too far forward on the floats and it plowed in on the first attempt flipping it over in the water, I was able to move the plane back an inch and had to add 1/2 oz of weight to the rear and I tried it again was able to taxi and got up on plane and took off, the plane flew very well for as windy as it was, the ride was very bumpy you would be flying straight and level and the wind would knock you almost upside down, I did have to add some up elevator and managed several passes and 1 touch and go but the wind proved to be too much at the far end of the lake I was turning back to come in for a landing and the wind knocked me Over. I will say it was tough on everybody flying, of the 10 pilots who were brave enough to go up 4 went into the drink!
One guy was recording some of the action and just panned over to see the rescue boats recover a plane and I took a still image from his video and it sums up my float fly day.
float plane in water.jpg
float plane in water.jpg (204.29 KiB) Viewed 7768 times

Re: Gerald's Scratch build Float plane " SPLASH"

Posted: Sun Jun 12, 2016 7:48 am
by Graham Lawrie
Unlucky Gerald,:) next time:)

Re: Gerald's Scratch build Float plane " SPLASH"

Posted: Sun Jun 12, 2016 3:39 pm
by cml001
Try again!

Flight video of "Splash" Not on water but on the floats!

Posted: Tue Jun 21, 2016 6:23 pm
by Vipertech13
Here it is in flight!
https://youtu.be/lbDAyVQITgI

Here is the second flight of the day! Much better landing!

Posted: Wed Jun 22, 2016 3:19 am
by Vipertech13
This is my best landing of any plane I have flown and I just cracked up laughing!

https://youtu.be/WyWJBcTzaHs

Re: Gerald's Scratch build Float plane " SPLASH"

Posted: Wed Jun 22, 2016 5:48 am
by Derek
It sure does make ya feel good when you can land em like that. Well done buddy!

Re: Gerald's Scratch build Float plane " SPLASH"

Posted: Sun Jun 26, 2016 2:54 pm
by cml001
Nice!