Align T-Rex 700E Pro DFC Build

Got a new project going on? Document your builds of aircraft here. Video and pictures highly encouraged!

Moderator: Moderators

Forum rules
Please post one thread per aircraft or project. If you're doing a rebuild or major make over of an existing aircraft you can start a new thread, but you are encouraged to cross link the new thread and original build thread so people can easily see the history of your aircraft.
User avatar
CrazyCooter75
Member
Member
Posts: 122
Joined: Tue Dec 02, 2014 3:52 pm
Location: Spring Branch, Texas

Re: Align T-Rex 700E Pro DFC Build

Post by CrazyCooter75 »

Got some Rails and a little red bling 8-). I was getting a pretty good tail hum, and the Rail 106's took care of that. Haven't had a chance to fly it with the mains yet, but can't wait to see the difference!
Attachments
WP_20150209_19_11_53_Pro[1].jpg
WP_20150209_19_11_53_Pro[1].jpg (1.53 MiB) Viewed 1586 times
WP_20150209_19_12_18_Pro[1].jpg
WP_20150209_19_12_18_Pro[1].jpg (1.44 MiB) Viewed 1586 times
WP_20150209_19_12_49_Pro[1].jpg
WP_20150209_19_12_49_Pro[1].jpg (1.34 MiB) Viewed 1586 times
Tarot 450 FBL (Robird, YEP45, Hobbymate 2000KV)
Align 500 Pro DFC (Robird, YEP80, Turnigy SK3 1600KV)
Align 550E Pro DFC (Robird, YEP 120LV, 730MX)
Align 700E Pro DFC (GPro, YEP 120HV, 800MX)
Align 700G DFC (Brain, OS GT15HZ)
BAH Nemesis 240 Mini Quad
User avatar
cml001
Supporter
Supporter
Posts: 2882
Joined: Fri Nov 07, 2014 4:46 pm
Location: Augusta GA

Re: Align T-Rex 700E Pro DFC Build

Post by cml001 »

Ull never want another brand blade again! They R AWESOME! Look'n good! Like the canopy trim around the head.. Where did u get it!
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
User avatar
CrazyCooter75
Member
Member
Posts: 122
Joined: Tue Dec 02, 2014 3:52 pm
Location: Spring Branch, Texas

Re: Align T-Rex 700E Pro DFC Build

Post by CrazyCooter75 »

Thanks! It's the Goblin edge guard. You can get it at Helidirect, rdepothobbies, anythingheli for $6.
Tarot 450 FBL (Robird, YEP45, Hobbymate 2000KV)
Align 500 Pro DFC (Robird, YEP80, Turnigy SK3 1600KV)
Align 550E Pro DFC (Robird, YEP 120LV, 730MX)
Align 700E Pro DFC (GPro, YEP 120HV, 800MX)
Align 700G DFC (Brain, OS GT15HZ)
BAH Nemesis 240 Mini Quad
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: Align T-Rex 700E Pro DFC Build

Post by Derek »

That has really turned out to be a sweet build buddy! Nice job!!!
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
User avatar
CrazyCooter75
Member
Member
Posts: 122
Joined: Tue Dec 02, 2014 3:52 pm
Location: Spring Branch, Texas

Re: Align T-Rex 700E Pro DFC Build

Post by CrazyCooter75 »

Thanks Derek! I always seem to be looking for upgrades....lol. Next on my list are the KDE thrusted main blocks...once my wallet recovers from the gasser :D
Tarot 450 FBL (Robird, YEP45, Hobbymate 2000KV)
Align 500 Pro DFC (Robird, YEP80, Turnigy SK3 1600KV)
Align 550E Pro DFC (Robird, YEP 120LV, 730MX)
Align 700E Pro DFC (GPro, YEP 120HV, 800MX)
Align 700G DFC (Brain, OS GT15HZ)
BAH Nemesis 240 Mini Quad
User avatar
CrazyCooter75
Member
Member
Posts: 122
Joined: Tue Dec 02, 2014 3:52 pm
Location: Spring Branch, Texas

Re: Align T-Rex 700E Pro DFC Build

Post by CrazyCooter75 »

I found a little more bling on Ebay for the Rex :D. Also ordered the Lynx Spindle bolts for the main grips. She's slowly morphing into a Dominator...lol. Next will be HV servos and 160A ESC, once my flying abilities warrant them.
Attachments
WP_20150303_18_36_25_Pro[1].jpg
WP_20150303_18_36_25_Pro[1].jpg (1.74 MiB) Viewed 1564 times
WP_20150303_18_38_42_Pro[1].jpg
WP_20150303_18_38_42_Pro[1].jpg (1.88 MiB) Viewed 1564 times
WP_20150303_20_37_22_Pro[1].jpg
WP_20150303_20_37_22_Pro[1].jpg (1.72 MiB) Viewed 1564 times
WP_20150303_20_37_33_Pro[1].jpg
WP_20150303_20_37_33_Pro[1].jpg (1.74 MiB) Viewed 1564 times
Tarot 450 FBL (Robird, YEP45, Hobbymate 2000KV)
Align 500 Pro DFC (Robird, YEP80, Turnigy SK3 1600KV)
Align 550E Pro DFC (Robird, YEP 120LV, 730MX)
Align 700E Pro DFC (GPro, YEP 120HV, 800MX)
Align 700G DFC (Brain, OS GT15HZ)
BAH Nemesis 240 Mini Quad
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: Align T-Rex 700E Pro DFC Build

Post by Derek »

That's an awesome looking machine!!!
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
User avatar
Graham Lawrie
Moderator
Moderator
Posts: 5049
Joined: Thu Nov 06, 2014 7:14 pm
Location: Kinlochleven, Scotland
Contact:

Re: Align T-Rex 700E Pro DFC Build

Post by Graham Lawrie »

Looking Very nice now:) Video next?? :)
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius




CITIZEN # 521
User avatar
CrazyCooter75
Member
Member
Posts: 122
Joined: Tue Dec 02, 2014 3:52 pm
Location: Spring Branch, Texas

Re: Align T-Rex 700E Pro DFC Build

Post by CrazyCooter75 »

Thanks Graham! I have been wanting to post videos, but can't pry my son away from the XBox long enough to hold the camera.. :evil:. I ordered the red anodized stepped washers for the frame screws to match the other red components. There are a few screws that have smaller frame holes, so I am waiting for a set of the red normal "C" washers to finish it off.
Attachments
WP_20150331_20_45_59_Pro[1].jpg
WP_20150331_20_45_59_Pro[1].jpg (1.65 MiB) Viewed 1512 times
WP_20150331_20_46_29_Pro[1].jpg
WP_20150331_20_46_29_Pro[1].jpg (2.03 MiB) Viewed 1512 times
WP_20150331_20_46_37_Pro[1].jpg
WP_20150331_20_46_37_Pro[1].jpg (1.75 MiB) Viewed 1512 times
WP_20150331_21_11_20_Pro[1].jpg
WP_20150331_21_11_20_Pro[1].jpg (1.9 MiB) Viewed 1512 times
WP_20150331_21_11_26_Pro[1].jpg
WP_20150331_21_11_26_Pro[1].jpg (2.1 MiB) Viewed 1512 times
WP_20150331_21_11_46_Pro[1].jpg
WP_20150331_21_11_46_Pro[1].jpg (1.92 MiB) Viewed 1512 times
WP_20150331_21_13_11_Pro[1].jpg
WP_20150331_21_13_11_Pro[1].jpg (1.66 MiB) Viewed 1512 times
Tarot 450 FBL (Robird, YEP45, Hobbymate 2000KV)
Align 500 Pro DFC (Robird, YEP80, Turnigy SK3 1600KV)
Align 550E Pro DFC (Robird, YEP 120LV, 730MX)
Align 700E Pro DFC (GPro, YEP 120HV, 800MX)
Align 700G DFC (Brain, OS GT15HZ)
BAH Nemesis 240 Mini Quad
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: Align T-Rex 700E Pro DFC Build

Post by Tony »

Wow, what a cool bird....
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
Post Reply

Return to “Member Builds”