Converting a dead 3s pack, to a good 2s pack

Got a new project going on? Document your builds of aircraft here. Video and pictures highly encouraged!

Moderator: Moderators

Forum rules
Please post one thread per aircraft or project. If you're doing a rebuild or major make over of an existing aircraft you can start a new thread, but you are encouraged to cross link the new thread and original build thread so people can easily see the history of your aircraft.
Post Reply
User avatar
Lee
Moderator
Moderator
Posts: 1824
Joined: Fri Nov 07, 2014 6:16 pm
Location: Tarifa, Spain

Converting a dead 3s pack, to a good 2s pack

Post by Lee »

I had two batteries with one dead cell in each.
So I decide to make them into 2s packs.
It worked a treat.
Now I have a lighter pack for my goggles. And an Rx pack.
image.jpeg
image.jpeg (2.12 MiB) Viewed 1214 times
GOBLIN 570------IKON
WARP 360--------IKON
QAV 500----------Open Pilot
RCXH250---------Open Pilot

Citizen #229
Top
User avatar
Graham Lawrie
Moderator
Moderator
Posts: 5049
Joined: Thu Nov 06, 2014 7:14 pm
Location: Kinlochleven, Scotland
Contact:
Contact Graham Lawrie

Re: Converting a dead 3s pack, to a good 2s pack

Post by Graham Lawrie »

Good idea Lee:)
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius




CITIZEN # 521
Top
User avatar
Stambo
Member
Member
Posts: 1349
Joined: Thu Nov 20, 2014 7:13 pm
Location: Whangarei New Zealand

Re: Converting a dead 3s pack, to a good 2s pack

Post by Stambo »

I have 3 3s packs with one dud cell each and I was going to try make 2 good 3s packs but separating the cells seems to be an issue.
RCX 250 Minquad FPV addiction
500 X quad FPV/AP platform
450 X quad set up for night flight
Multiple WLToys V911, V949, V959
Taranis, Turnigy 9X
Fatshark Predator, Immersion 5800 Duo
Trex 500 Esky Belt CP V2
Top
User avatar
cml001
Supporter
Supporter
Posts: 2882
Joined: Fri Nov 07, 2014 4:46 pm
Location: Augusta GA

Re: Converting a dead 3s pack, to a good 2s pack

Post by cml001 »

Hummmm.. Interesting.
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Top
User avatar
Marius
Supporter
Supporter
Posts: 411
Joined: Fri Nov 07, 2014 3:53 pm
Location: Norway

Re: Converting a dead 3s pack, to a good 2s pack

Post by Marius »

Nice. Would be nice to have seen how you did it though :)
Your new friend from Norway!

Learning To Fly
Top
User avatar
Lee
Moderator
Moderator
Posts: 1824
Joined: Fri Nov 07, 2014 6:16 pm
Location: Tarifa, Spain

Re: Converting a dead 3s pack, to a good 2s pack

Post by Lee »

Stambo wrote:I have 3 3s packs with one dud cell each and I was going to try make 2 good 3s packs but separating the cells seems to be an issue.
I just pushed a blunt piece of thin plastic between the cells to release the glue.
It can be tricky, and is possible to damage the cell quite easily.
Marius wrote:Nice. Would be nice to have seen how you did it though :)
I just desoldered all the cells, removed all wires.
Then solder back together the tabs of the good cells in series.
Added back the battery lead to the first and last tabs.
Sequence for 2S is:
+ battery lead to + terminal of first cell,
- terminal soldered to + terminal of second cell,
- battery lead soldered to - terminal of second battery.

I didn't bother with a balance lead, as these are only for my goggles.
GOBLIN 570------IKON
WARP 360--------IKON
QAV 500----------Open Pilot
RCXH250---------Open Pilot

Citizen #229
Top
User avatar
danhampson
Site Admin
Site Admin
Posts: 1746
Joined: Thu Nov 06, 2014 2:54 pm
Location: Manchester, United Kingdom
Contact:
Contact danhampson

Re: Converting a dead 3s pack, to a good 2s pack

Post by danhampson »

a friend of mine recommended the use of zippo lighter fluid to help release the adhesive between the cells, but ive not had the chance to butcher some old packs yet.
FPV addict.
Top
Post Reply

Return to “Member Builds”