Hopefully have new controller by mid week, so time will tell
- image.jpg (142.18 KiB) Viewed 1856 times
Building a gimbal
Moderator: Moderators
Forum rules
Please post one thread per aircraft or project. If you're doing a rebuild or major make over of an existing aircraft you can start a new thread, but you are encouraged to cross link the new thread and original build thread so people can easily see the history of your aircraft.
Please post one thread per aircraft or project. If you're doing a rebuild or major make over of an existing aircraft you can start a new thread, but you are encouraged to cross link the new thread and original build thread so people can easily see the history of your aircraft.
Re: Building a gimbal
Well it gave me a bit of time to tear it down and finishing touches to the main Rams and make the mount bracket, and get it balanced well,
Hopefully have new controller by mid week, so time will tell
Hopefully have new controller by mid week, so time will tell
Minor league Aviator, against gravity which normally wins!
RotoriousFPV quads Micro Rad 3" Gat 4" and Rad 5"
D-Quad Obsession
Yuneec Typhoon H
Taranis Qx7,
RotoriousFPV quads Micro Rad 3" Gat 4" and Rad 5"
D-Quad Obsession
Yuneec Typhoon H
Taranis Qx7,
Re: Building a gimbal
Well the new 32 bit controller turned up today, got the Gui downloaded and it connected up great, 
only thing with it is it comes in pieces
so out with the soldering iron again, lol I love soldering 
but on a positive note it comes with cases for both the controller and PMU unit, but I did have to fettle the bottom cover to be able to fit side pins by using the supplied straight headers,
only thing with it is it comes in pieces
so out with the soldering iron again, lol I love soldering but on a positive note it comes with cases for both the controller and PMU unit, but I did have to fettle the bottom cover to be able to fit side pins by using the supplied straight headers,
- 20150813_130646-1[1].jpg (3.53 MiB) Viewed 1851 times
- 20150813_130745-1[2].jpg (2.78 MiB) Viewed 1851 times
Minor league Aviator, against gravity which normally wins!
RotoriousFPV quads Micro Rad 3" Gat 4" and Rad 5"
D-Quad Obsession
Yuneec Typhoon H
Taranis Qx7,
RotoriousFPV quads Micro Rad 3" Gat 4" and Rad 5"
D-Quad Obsession
Yuneec Typhoon H
Taranis Qx7,
Re: Building a gimbal
Nice one, looks the business...
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
-
Graham Lawrie
- Moderator
- Posts: 5049
- Joined: Thu Nov 06, 2014 7:14 pm
- Location: Kinlochleven, Scotland
- Contact:
Re: Building a gimbal
Looks good Kev:)
I love soldering to:)
I love soldering to:)
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius
CITIZEN # 521
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius
CITIZEN # 521
Re: Building a gimbal
Board soldered.
But not in the right mood to fiddle and set it up at the moment.
But not in the right mood to fiddle and set it up at the moment.
- 20150815_182446.jpg (4.49 MiB) Viewed 1841 times
Minor league Aviator, against gravity which normally wins!
RotoriousFPV quads Micro Rad 3" Gat 4" and Rad 5"
D-Quad Obsession
Yuneec Typhoon H
Taranis Qx7,
RotoriousFPV quads Micro Rad 3" Gat 4" and Rad 5"
D-Quad Obsession
Yuneec Typhoon H
Taranis Qx7,
Re: Building a gimbal
Ditto Kev,
Tools down, for me too.
Always end up making a mistake, when you're not in the right frame of mind
Tools down, for me too.
Always end up making a mistake, when you're not in the right frame of mind
GOBLIN 570------IKON
WARP 360--------IKON
QAV 500----------Open Pilot
RCXH250---------Open Pilot
Citizen #229
WARP 360--------IKON
QAV 500----------Open Pilot
RCXH250---------Open Pilot
Citizen #229
-
Graham Lawrie
- Moderator
- Posts: 5049
- Joined: Thu Nov 06, 2014 7:14 pm
- Location: Kinlochleven, Scotland
- Contact:
Re: Building a gimbal
Looks very neat:)
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius
CITIZEN # 521
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius
CITIZEN # 521
Re: Building a gimbal
Well I had 2 hours playing with the controller from Banggood and the outcome is board is no good, pitch channel not working, and hence board wont initialise,
but on a brighter note, my second GLB Mini Alexmos board turned up today, connected to the pc after a bit of finding which GUI to use, and it looks like its gonna be better as setting for high PWM rate is already set in the board,
guess its gonna be fiddle time later as cant fly as its peeing down, thanks mother nature!
but on a brighter note, my second GLB Mini Alexmos board turned up today, connected to the pc after a bit of finding which GUI to use, and it looks like its gonna be better as setting for high PWM rate is already set in the board,
guess its gonna be fiddle time later as cant fly as its peeing down, thanks mother nature!
Minor league Aviator, against gravity which normally wins!
RotoriousFPV quads Micro Rad 3" Gat 4" and Rad 5"
D-Quad Obsession
Yuneec Typhoon H
Taranis Qx7,
RotoriousFPV quads Micro Rad 3" Gat 4" and Rad 5"
D-Quad Obsession
Yuneec Typhoon H
Taranis Qx7,
Re: Building a gimbal
Sucks!
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Pulse Battery
Castle Creations
Morgan Fuel
Re: Building a gimbal
Whats that Clay the weather or the naff boards,
took my daughter to a theme park yesterday and it was a long day, so pretty fubar at the moment, so I think flying tonight I would be a bit of a liability,
took my daughter to a theme park yesterday and it was a long day, so pretty fubar at the moment, so I think flying tonight I would be a bit of a liability,
Minor league Aviator, against gravity which normally wins!
RotoriousFPV quads Micro Rad 3" Gat 4" and Rad 5"
D-Quad Obsession
Yuneec Typhoon H
Taranis Qx7,
RotoriousFPV quads Micro Rad 3" Gat 4" and Rad 5"
D-Quad Obsession
Yuneec Typhoon H
Taranis Qx7,
Re: Building a gimbal
Both I guess.. But having to fight with a new board.. Sounds soooo frustrating! But an outing with the family.. Score!
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Pulse Battery
Castle Creations
Morgan Fuel
Re: Building a gimbal
Seeing the smile on my daughters face is priceless, no amount of RC could come close,
Minor league Aviator, against gravity which normally wins!
RotoriousFPV quads Micro Rad 3" Gat 4" and Rad 5"
D-Quad Obsession
Yuneec Typhoon H
Taranis Qx7,
RotoriousFPV quads Micro Rad 3" Gat 4" and Rad 5"
D-Quad Obsession
Yuneec Typhoon H
Taranis Qx7,
Re: Building a gimbal
I'm with u on that!
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Pulse Battery
Castle Creations
Morgan Fuel