Oh dear it's a Fossils stuff Gravity 180

KevG · Post by **KevG** » Mon Feb 15, 2016 10:13 pm

Well the owner of Fossils stuff has done it again and is releasing another new quad and as you read in the title is a baby fossil.

With the craze being in small powerful and agile quads this was a category that was waiting for an entry.

So guess what I'm getting one to build and thought I would give everyone a bit of a preview

This is one of the team pilots prototype build

: received_10153442006400784.jpeg (73.76 KiB) Viewed 3156 times

And a video https://youtu.be/X1KFKnBkIBg

And the specs I know

4 inch props
22xx motors
Little bees 20a or similar
Room for full size naze or even the new tbs power cube
And upto 1500mah 4s drone lab for size.
Hs1177 fpv cam and 25 - 200mw vx

Will carry a gopro no problem.

Post by **danhampson** » Mon Feb 15, 2016 11:24 pm

I like that. May just have to sneak one in the house

Stambo · Post by **Stambo** » Mon Feb 15, 2016 11:45 pm

Nice, looks like loads of fun.

Those motors look really well protected.

KevG · Post by **KevG** » Tue Feb 16, 2016 8:07 am

If its like any of the other fossils frames it will take a hell of a beating,

Dan it will be released this month and with great colour options,

Stambo, its one thing I found with my Gravity 250 the motor protection is epic, had so many crashes with mine and only hurt one motor when I hit a steel fence bar.

KevG · Post by **KevG** » Wed Feb 17, 2016 9:12 am

A bit more info guys

The frame is going to come with the same guarantee as the 250 and 280 frames. Break it once and if it's un flyable and deemed a warranty claim you will have the piece replaced.

Also if you want to be a little different then why not mix and match your colours.

: received_10153443716820784.jpeg (80.26 KiB) Viewed 3141 times

Looking to release to buy next week.

Graham Lawrie · Post by **Graham Lawrie** » Wed Feb 17, 2016 8:31 pm

Different, and it will be quality from Fossil , but not for me

KevG · Post by **KevG** » Wed Feb 17, 2016 9:40 pm

Not everything is for everybody mate, but you know me I'm different,

Graham Lawrie · Post by **Graham Lawrie** » Wed Feb 17, 2016 9:57 pm

I have too many already Kev:)

KevG · Post by **KevG** » Thu Feb 18, 2016 8:39 am

Some of the bits for my build,

Plus have got 4 liitlebees and luminier pdb with pololu.

: received_1331180973563887[1].jpeg (95.67 KiB) Viewed 3128 times

Plus the first piece of the build, done a power flight controller stack,

: 20160217_192951[1].jpg (1.44 MiB) Viewed 3128 times

: 20160217_194603[1].jpg (1.23 MiB) Viewed 3128 times

: 20160217_195553[1].jpg (1.28 MiB) Viewed 3128 times

: 20160217_195557[1].jpg (1.31 MiB) Viewed 3128 times

Post by **danhampson** » Thu Feb 18, 2016 4:30 pm

Is that a a sprf3 board I spy there Kev

Post by **danhampson** » Thu Feb 18, 2016 9:22 pm

What kv motors are they kev?

Graham Lawrie · Post by **Graham Lawrie** » Thu Feb 18, 2016 10:30 pm

Looking good Kev:)

KevG · Post by **KevG** » Mon Mar 14, 2016 1:19 pm

update

The 180 is now released on the website and mine should ship tomorrow,

Tools at the ready its going to be a busy couple of weeks,

KevG · Post by **KevG** » Tue Mar 15, 2016 1:05 pm

well I think its gonna be dispatched today, well hoping anyway. but been sent a pic of whats coming, I said give me a mixed bag and that's whats been done

: received_10153506070795784[1].jpeg (253.74 KiB) Viewed 3072 times

build as soon as it gets here.

cml001 · Post by **cml001** » Tue Mar 15, 2016 1:13 pm

It's a baby bird!

Graham Lawrie · Post by **Graham Lawrie** » Tue Mar 15, 2016 8:15 pm

What size of motors can it take?

KevG · Post by **KevG** » Tue Mar 15, 2016 9:45 pm

22xx motors

I'm going with Emax RS2205 2600kv red bottoms,

Supposed to be very lively

Post by **danhampson** » Wed Mar 16, 2016 5:55 pm

That's a lot of motor for such a small frame. Is it here yet???

KevG · Post by **KevG** » Wed Mar 16, 2016 9:18 pm

Yes mate had it today, and it's put together and its bonkers, flew perfect out of the box on beta flight 2.5.3 luxfloat and stock PID's

Will update thread tomorrow

KevG · Post by **KevG** » Thu Mar 17, 2016 8:48 am

Here is the little beasty

: 20160316_124303[1].jpg (1.12 MiB) Viewed 3053 times

All I had to do was cut motor and esc wires to length and fit everything in as I had made my cube up before hand,

: 20160316_124103[1].jpg (1.36 MiB) Viewed 3053 times

to be fair its tight in there,

: 20160316_135251[1].jpg (1.16 MiB) Viewed 3053 times

and the finished bird

: 20160316_155203[1].jpg (1.26 MiB) Viewed 3053 times

and the maiden, video thanks to my mate.....

https://youtu.be/r7CsvWgfmO4

RC-Hangout

Oh dear it's a Fossils stuff Gravity 180

Oh dear it's a Fossils stuff Gravity 180

Re: Oh dear it's a Fossils stuff Gravity 180

Re: Oh dear it's a Fossils stuff Gravity 180

Re: Oh dear it's a Fossils stuff Gravity 180

Re: Oh dear it's a Fossils stuff Gravity 180

Re: Oh dear it's a Fossils stuff Gravity 180

Re: Oh dear it's a Fossils stuff Gravity 180

Re: Oh dear it's a Fossils stuff Gravity 180

Re: Oh dear it's a Fossils stuff Gravity 180

Re: Oh dear it's a Fossils stuff Gravity 180

Re: Oh dear it's a Fossils stuff Gravity 180

Re: Oh dear it's a Fossils stuff Gravity 180

Re: Oh dear it's a Fossils stuff Gravity 180

Re: Oh dear it's a Fossils stuff Gravity 180

Re: Oh dear it's a Fossils stuff Gravity 180

Re: Oh dear it's a Fossils stuff Gravity 180

Re: Oh dear it's a Fossils stuff Gravity 180

Re: Oh dear it's a Fossils stuff Gravity 180

Re: Oh dear it's a Fossils stuff Gravity 180

Re: Oh dear it's a Fossils stuff Gravity 180