SUPER BAD'S OXY3

Superbad · Post by **Superbad** » Thu Mar 19, 2015 11:11 pm

Well I got one A flying Clog

Post by **pvolcko** » Fri Mar 20, 2015 1:50 am

Gonna do a build thread? I'm not sure I want to buy and build another heli this year, but if I do it's probably between this one and the Gob 370.

Superbad · Post by **Superbad** » Fri Mar 20, 2015 2:14 am

Na Im just going to put it together then talk about it
I have already got the tail section done and on to the frame asm.

Superbad · Post by **Superbad** » Fri Mar 20, 2015 4:06 am

The frame bolts are crap the heads strip way to easy
They put all the bolts in were they go before shipping and they are not real tight but have striped several of the bolts just taking them out
The bolts Remind me of a really cheep clone

Post by **pvolcko** » Fri Mar 20, 2015 5:17 am

That sucks. Hope that's the only shortcoming.

murankar · Post by **murankar** » Fri Mar 20, 2015 7:23 am

For the price those things should have been titanium. Sounds like EXI before they met there maker.

Graham Lawrie · Post by **Graham Lawrie** » Fri Mar 20, 2015 8:20 am

That sounds bad Jesse:( do you have a warranty on it?

Tony · Post by **Tony** » Fri Mar 20, 2015 10:36 am

Wow, that really sucks Jesse, I'd be wanting my money back!

Superbad · Post by **Superbad** » Fri Mar 20, 2015 11:24 am

I post over on the HF In the Oxy thread and they are saying its my tool not the bolts. OK but I have used 3 1.5 hex drivers and got the same thing

murankar · Post by **murankar** » Fri Mar 20, 2015 11:58 am

You have the Align driver set right? Those should be good enough to handle an Oxy 3. I have 2 scorpion drivers that are just the bee's knees. I love them, they are the first drivers I grab for any kind of work on the heli.

Post by **pvolcko** » Fri Mar 20, 2015 1:33 pm

There is something to be said for quality tools. But if you're getting stripped bolts using the same tools you use on other kits without issue then it seems there might be a kit issue. That said, it's a few screws. Use some extras and git 'er done.

Superbad · Post by **Superbad** » Fri Mar 20, 2015 2:54 pm

I have a few sets of drivers that I use I didnt have any problems out of any of them on Forza 450 build

Superbad · Post by **Superbad** » Sat Mar 21, 2015 2:38 am

Well there it sits waiting on its FBL unit to get here

Tony · Post by **Tony** » Sat Mar 21, 2015 9:16 am

Looks good Jesse, what FBL unit you putting on her?

Superbad · Post by **Superbad** » Sat Mar 21, 2015 1:25 pm

Im going to try out the Ikon

Superbad · Post by **Superbad** » Sun Mar 22, 2015 3:38 am

The finish on the Zeal blade that came in my Kit is very bad
Im not very impressed with hope it will fly worth a darn

KevG · Post by **KevG** » Sun Mar 22, 2015 11:40 am

Post the pics up in the Zeal forum on HF you might get some free replacements

Tony · Post by **Tony** » Sun Mar 22, 2015 12:56 pm

They don't look too clever like Jesse, +1 on Kevs suggestion...

Superbad · Post by **Superbad** » Sun Mar 22, 2015 1:58 pm

Yes I posted it on the OXY forum and I get a PM from the man himself Luca
Told me it is just dirt from the packing and should wash off with water Really did he just say that burn marks in the finish will wash off with water

Graham Lawrie · Post by **Graham Lawrie** » Sun Mar 22, 2015 11:30 pm

They look used:( All my zeal blades have been good apart from the first set that had a flaw:(

RC-Hangout

SUPER BAD'S OXY3

SUPER BAD'S OXY3

Re: SUPER BAD'S OXY3

Re: SUPER BAD'S OXY3

Re: SUPER BAD'S OXY3

Re: SUPER BAD'S OXY3

Re: SUPER BAD'S OXY3

Re: SUPER BAD'S OXY3

Re: SUPER BAD'S OXY3

Re: SUPER BAD'S OXY3

Re: SUPER BAD'S OXY3

Re: SUPER BAD'S OXY3

Re: SUPER BAD'S OXY3

Re: SUPER BAD'S OXY3

Re: SUPER BAD'S OXY3

Re: SUPER BAD'S OXY3

Re: SUPER BAD'S OXY3

Re: SUPER BAD'S OXY3

Re: SUPER BAD'S OXY3

Re: SUPER BAD'S OXY3

Re: SUPER BAD'S OXY3