Align Trex 500e Flybarred Has Been Serviced

Discussion, questions, builds, and tutorials on helicopters 350 size through 500 size.

Moderator: Moderators

Post Reply
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Align Trex 500e Flybarred Has Been Serviced

Post by Derek »

Although it's VERY late in the season, I got my 500 down from the shelf and tore it down today. Replaced all bearings. Oiled all radial bearings, greased all thrust bearings. Replaced the tail belt. New servos, which obviously lead to leveling the swashplate and resetting the pitch to +/- 10 degrees. Very happy! The 450 is next.
Trex 500.jpg
Trex 500.jpg (127.36 KiB) Viewed 4992 times
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
User avatar
DOG
Member
Member
Posts: 1786
Joined: Fri Mar 06, 2015 4:03 am
Location: Inverness Florida

Re: Align Trex 500e Flybarred Has Been Serviced

Post by DOG »

Hey there Derek :o Winter must be getting closer to you, BURRRR! It's a good time for repairs and maintenance I take it ;) . The birds will love that TLC overhaul your going to give them :lol:
HK 500 DFC
Gaui X3L
Tarot 450DFC scale/Coastguard
Fossil 180
Fossil 210
Citizen member #00748
User avatar
cml001
Supporter
Supporter
Posts: 2882
Joined: Fri Nov 07, 2014 4:46 pm
Location: Augusta GA

Re: Align Trex 500e Flybarred Has Been Serviced

Post by cml001 »

10 degrees? I've see u fly.. move it to at least 12! Lol
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: Align Trex 500e Flybarred Has Been Serviced

Post by Derek »

Lol, why do u say that?
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
User avatar
cml001
Supporter
Supporter
Posts: 2882
Joined: Fri Nov 07, 2014 4:46 pm
Location: Augusta GA

Re: Align Trex 500e Flybarred Has Been Serviced

Post by cml001 »

POP.. needs that POP! Lol.. I don't know, just messing with u.. typically on cyclic I'm 8-10 degrees depending on the size of the bird and the FBL controller.. collective on a small 450 I'm at about 12-12.5, on 600 & up I'm at 13.5-14... power is a consideration as well.. my E5 is set up as a 600 class.. I'm on 6s right now so I've got it around 12.5.. if it were on 12.. I'd bump it up a bit more.. ultimately it's a feel thing tho. I was just screwing with u... get tha bird in the air!
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: Align Trex 500e Flybarred Has Been Serviced

Post by Derek »

No worries, Clay! Mess with me all you like. Im not sure vie ever flown my 500 with more than 10 degrees of pitch. Its got a 12 tooth pinion but I've thought about putting on a 13 tooth pinion that I bought.
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
User avatar
DOG
Member
Member
Posts: 1786
Joined: Fri Mar 06, 2015 4:03 am
Location: Inverness Florida

Re: Align Trex 500e Flybarred Has Been Serviced

Post by DOG »

Hey there Derek. I wish I knew you needed a 13T. I would of send you one. Shoot I'm looking to get a 12T for my 500 to give it a try. I do have the 13T on it now. I'm running 13 degrees pitch on the 500 and the 450/X3 are 12.6. The 450 and X3 both have 12T on the motor.
HK 500 DFC
Gaui X3L
Tarot 450DFC scale/Coastguard
Fossil 180
Fossil 210
Citizen member #00748
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: Align Trex 500e Flybarred Has Been Serviced

Post by Derek »

Nah, I don't need a 13 tooth pinion. I bought one early this year but never installed it lol
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
User avatar
pvolcko
Site Admin
Site Admin
Posts: 2197
Joined: Thu Nov 06, 2014 3:18 pm
Location: Syracuse, NY
Contact:

Re: Align Trex 500e Flybarred Has Been Serviced

Post by pvolcko »

10 deg collective is pretty tame. That would feel overly soft to me. Accidentally set my 550 up at 10 deg this summer and it was like a turtle doing pushouts and rainbows. :)
Paul Volcko
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: Align Trex 500e Flybarred Has Been Serviced

Post by Derek »

Turtle-mode, eh? We can't have that, lol. 12 degrees it is then, ha ha ha
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
Post Reply

Return to “Mid-size Helis (350 - 500)”