Tbs flight board

DOG · Post by **DOG** » Sun Feb 05, 2017 12:06 am

Hey all. Well after plugging in and out the usb cord 2 motor wires came loose. Maybe this was part of the problem with the Xracer

: IMG_1103.JPG (188.27 KiB) Viewed 530 times

Now I'm suppose to solder those wires back on?

DOG · Post by **DOG** » Sun Feb 05, 2017 3:17 am

Well I decided this a good time then any to learn how to solder this little board

and gave it a try

Now I'm looking for a replacement

I was wondering if this will work https://www.helidirect.com/tinywhoop/el ... oller.html

Not this one again.

Graham Lawrie · Post by **Graham Lawrie** » Sun Feb 05, 2017 9:13 am

If you have not soldered before, depending on your skills level, i would not practice on a flight board as you can overheat the connection and the trace can fall off.

Yes this could have been the issue or one of your issues, but i would send the picture to TBS to replace it rather than you solder it:)

RC-Hangout

Tbs flight board

Tbs flight board

Re: Tbs flight board

Re: Tbs flight board