RC-Hangout

I have 2 cw and 2 ccw threaded motors

I know the cw have to be placed at diagonals as do the ccw motors,

But the motor with the ccw thread turns the prop ccw, if my logic is right,

But do the motors have to be in specific places or can I chose that in the software later on the cc3d

They have to be specific.
Download the Open pilot software and have a look through it.
Motors
1 CW
2 CCW
3 CW
4 CCW
Treads must tighten in the opposite direction to the motor.

Thanks Lee, will download it now,