ESC for Scorpion HKIII-4025-890KV

Electric motors, nitro and gas engines, turbines, standalone governors and control systems

Moderator: Moderators

Post Reply
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

ESC for Scorpion HKIII-4025-890KV

Post by Derek »

I've been eyeballing this particular motor.

http://www.helidirect.com/product_info. ... s_id=37131

The specs say that it will handle 8S. It says the Maximum Continuous Current is 95amps and the Peak Current is 110amps. Without going to the CC 120 HV ESC, would there be a different ESC that I could use or should I just use the 120HV?
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
User avatar
Lee
Moderator
Moderator
Posts: 1824
Joined: Fri Nov 07, 2014 6:16 pm
Location: Tarifa, Spain

Re: ESC for Scorpion HKIII-4025-890KV

Post by Lee »

I had the 740KV version of this in my Chaos 600. I used the 100A Castle Phoenix ice.

You could use the Edge 130A.
GOBLIN 570------IKON
WARP 360--------IKON
QAV 500----------Open Pilot
RCXH250---------Open Pilot


Citizen #229
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: ESC for Scorpion HKIII-4025-890KV

Post by Derek »

thanks Lee! I didnt think about the Edge 130. For some reason, i was thinking it was 6S max also, but i see that it is rated for 8S.

Fantastic!!!
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
Post Reply

Return to “Power Plants”