I've been eyeballing this particular motor.
http://www.helidirect.com/product_info. ... s_id=37131
The specs say that it will handle 8S. It says the Maximum Continuous Current is 95amps and the Peak Current is 110amps. Without going to the CC 120 HV ESC, would there be a different ESC that I could use or should I just use the 120HV?
ESC for Scorpion HKIII-4025-890KV
Moderator: Moderators
ESC for Scorpion HKIII-4025-890KV
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Re: ESC for Scorpion HKIII-4025-890KV
I had the 740KV version of this in my Chaos 600. I used the 100A Castle Phoenix ice.
You could use the Edge 130A.
You could use the Edge 130A.
GOBLIN 570------IKON
WARP 360--------IKON
QAV 500----------Open Pilot
RCXH250---------Open Pilot
Citizen #229
WARP 360--------IKON
QAV 500----------Open Pilot
RCXH250---------Open Pilot
Citizen #229
Re: ESC for Scorpion HKIII-4025-890KV
thanks Lee! I didnt think about the Edge 130. For some reason, i was thinking it was 6S max also, but i see that it is rated for 8S.
Fantastic!!!
Fantastic!!!
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744