DX6 Tail curves?

DOG · Post by **DOG** » Sat Aug 01, 2015 3:10 am

Hey all, Can someone explain the "Tail curves" mode in the DX6 TX? I know that it helps counter torque of the blades but my radio is set on inhibit. Should this be On, so my tail helps the counter torque of the blades or leave it on Inhibit? The Manuel suggest on if in rate mode "Tail Lock", Which i don't understand. I guess If I'm using Headlock mode should I keep it set to Inhibit? I'M SOOOO

cml001 · Post by **cml001** » Sat Aug 01, 2015 3:49 am

Leave it to inhibit.. Ull utilize the same function via ur FBL gyro... The new AR7300BX is what ur running right? It's the tail precomp setting I believe.. But I'm not familiar with that unit.. Have to read up.... But u prolly won't use that function with ur TX... Kinda the old flybar way of doin it.. Not really relevant nowadays.

DOG · Post by **DOG** » Sat Aug 01, 2015 4:03 am

Thanks clay. Yes I'm using the AR7300BX and I do have it on Inhibit. I was just wondering and didn't know til now. Manual picture shows it on.

Derek · Post by **Derek** » Sat Aug 01, 2015 6:56 am

My understanding is that the tail curve feature is more for Scale flying...scale helicopters. DOG....just keep that INH because you are a sport flyer. No worries!!!

Graham Lawrie · Post by **Graham Lawrie** » Sat Aug 01, 2015 7:05 am

+1 INH:)

Lee · Post by **Lee** » Sat Aug 01, 2015 7:11 am

Yep, not needed.

DOG · Post by **DOG** » Sat Aug 01, 2015 7:55 am

Thanks guys.

Just my inquiring mind wants to know.

Graham Lawrie · Post by **Graham Lawrie** » Sat Aug 01, 2015 8:07 am

no harm in that:)

RC-Hangout

DX6 Tail curves?

DX6 Tail curves?

Re: DX6 Tail curves?

Re: DX6 Tail curves?

Re: DX6 Tail curves?

Re: DX6 Tail curves?

Re: DX6 Tail curves?

Re: DX6 Tail curves?

Re: DX6 Tail curves?