Ikon USB Cable
Moderator: Moderators
Ikon USB Cable
Currently, I have the Ikon positioned on my Trex 600 with the Ikon USB port to the front of the helicopter and the servo leads connect to the Ikon towards the back. However, the servo leads are within 1.5 inches of the spinning motor. I'd like to turn the Ikon around, 180 degrees so that the servo leads connect at the front. If I do that, the Ikon USB port would then be near the motor and there won't be enough room to connect Ikon USB cable.
Is there a 90 degree connector that can be purchased?
Is there a 90 degree connector that can be purchased?
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Re: Ikon USB Cable
The ikon came with a 90 deg adaptor,
But now they have brought out this
http://www.fast-lad.co.uk/store/product ... s_id=30854
But now they have brought out this
http://www.fast-lad.co.uk/store/product ... s_id=30854
Minor league Aviator, against gravity which normally wins!
RotoriousFPV quads Micro Rad 3" Gat 4" and Rad 5"
D-Quad Obsession
Yuneec Typhoon H
Taranis Qx7,
RotoriousFPV quads Micro Rad 3" Gat 4" and Rad 5"
D-Quad Obsession
Yuneec Typhoon H
Taranis Qx7,
Re: Ikon USB Cable
Could go with the blue tooth.. I like it.. But if it's 1.5" away, and the wires are secure.. I'd leave it be.
- Attachments
-
- image.jpg (1.55 MiB) Viewed 1916 times
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Pulse Battery
Castle Creations
Morgan Fuel
Re: Ikon USB Cable
I got my Ikon used with the 600. I got my cable from Paul. So I never had a 90 degree adapter.KevG wrote:The ikon came with a 90 deg adaptor,
But now they have brought out this
http://www.fast-lad.co.uk/store/product ... s_id=30854
The part, in that link, doesn't even have a connector that would plug in to where the USB cable plugs into.
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Re: Ikon USB Cable
It plugs where the blue tooth does... Same section where the servos plug in... That leads to the black box w a micro USB port that can be placed anywhere u choose. Are ur servo wires loose and able to be caught by the gear?
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Pulse Battery
Castle Creations
Morgan Fuel
Re: Ikon USB Cable
not sure I want to use the bluetooth, just yet. My phone has been causing me some troubles lately and I'm hoping to get a new one soon. I like being able to program it with the laptop.
No, the servo wires aren't really in any jeopardy of hitting the motor. I just think it looks like crap and i'd like to have the wires rerouted to the front.
No, the servo wires aren't really in any jeopardy of hitting the motor. I just think it looks like crap and i'd like to have the wires rerouted to the front.
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Re: Ikon USB Cable
I use the laptop w the Bluetooth.. I'm an iPhone guy.. No app for iOS so using the phone is not an option.. I like the laptop for this better anyhow.. I don't mind taking the top to the field... I got the Bluetooth because the USB port broke and I had to have the unit replaced as the port was bouncing round inside the case... After 2mths use.. They replaced it & I had them sent the Bluetooth with it.. I like it.
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Pulse Battery
Castle Creations
Morgan Fuel
Re: Ikon USB Cable
Oh, well that's different, lol. I didn't know that I could use the bluetooth in that way, lol. Where can I find the adapter?
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Re: Ikon USB Cable
Anything Bluetooth will see it.. Just need to be able to run ikon software to utilize it.. HeliDirect is where I got mine.
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Pulse Battery
Castle Creations
Morgan Fuel
Re: Ikon USB Cable
Ok....I'm going to be very honest with you here, lol. I'm not very good when it comes to newer electronic devices. I can't even get the Bluetooth on my phone to work. I spent HOURS and DAYS going through the Ikon programming just to gain an understanding of how it worked.
So...lol...that being said, lol....can i get you to share the link for the exact device that you are talking about? I can build 'em! I can fly 'em! The "tech" side of our rc's....well, that's where I struggle, lol.
So...lol...that being said, lol....can i get you to share the link for the exact device that you are talking about? I can build 'em! I can fly 'em! The "tech" side of our rc's....well, that's where I struggle, lol.
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Re: Ikon USB Cable
I found the adapter:
http://www.helidirect.com/crius-mwc-mul ... -31759.hdx
looks reasonably priced. I just spoke with friend of mine that only runs Ikon and he has bought this little unit. he has used it and seems to really like it.
http://www.helidirect.com/crius-mwc-mul ... -31759.hdx
looks reasonably priced. I just spoke with friend of mine that only runs Ikon and he has bought this little unit. he has used it and seems to really like it.
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Re: Ikon USB Cable
That's it!
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Pulse Battery
Castle Creations
Morgan Fuel
- ken jackson
- Member
- Posts: 280
- Joined: Sat Nov 08, 2014 1:17 am
- Location: Chesterton, Indiana
Re: Ikon USB Cable
I made a blue tooth for my IKON. It seemed to work just fine but when I looked at the setup the numbers were different on the blue tooth then they were on the PC. Referring to the calibration screen where where you set all the throws to 100. I didn't trust the bluetooth so I never used it. Ended up loosing it in a crash.
48" Edge 540T
Alien RR5
TRex 500 DFC w IKON
AS3X A10
VisionAire Flying Fine
Carbon-Z Yak 54 3x Amazing Plane
Flying Since October 2011 DX8 and Phoenix Simulator
Alien RR5
TRex 500 DFC w IKON
AS3X A10
VisionAire Flying Fine
Carbon-Z Yak 54 3x Amazing Plane
Flying Since October 2011 DX8 and Phoenix Simulator
Re: Ikon USB Cable
I think I'm just gonna take my helicopter to the Computer Service store (their facial expressions should be classic) and see if they can help me find a USB cable with a 90 degree cable end or a 90 degree adapter. I've been using my laptop and the USB cable to make changes to the settings and I quite like it. Yes, the Bluetooth accessory would be handy...maybe I'll get it down the road.
Thanks guys!
Thanks guys!
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
- Graham Lawrie
- Moderator
- Posts: 5049
- Joined: Thu Nov 06, 2014 7:14 pm
- Location: Kinlochleven, Scotland
- Contact:
Re: Ikon USB Cable
I have a bluetooth on mine on my 550 for the very same reason:) works a treat:)
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius
CITIZEN # 521
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius
CITIZEN # 521
Re: Ikon USB Cable
Yeah mine to Graham, have to say these Coolice units a great,
Minor league Aviator, against gravity which normally wins!
RotoriousFPV quads Micro Rad 3" Gat 4" and Rad 5"
D-Quad Obsession
Yuneec Typhoon H
Taranis Qx7,
RotoriousFPV quads Micro Rad 3" Gat 4" and Rad 5"
D-Quad Obsession
Yuneec Typhoon H
Taranis Qx7,
Re: Ikon USB Cable
Amazon is you're friend in this case.
http://amzn.com/B000FHBEFS
http://amzn.com/B004W8EIMW
http://amzn.com/B004NO0L4O
http://amzn.com/B00IFG9FDO
http://amzn.com/B00N2U0SSO
http://amzn.com/B000FHBEFS
http://amzn.com/B004W8EIMW
http://amzn.com/B004NO0L4O
http://amzn.com/B00IFG9FDO
http://amzn.com/B00N2U0SSO
Paul Volcko
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9