Lazy Susan:)

Scale parts and accessories and whatever isn't covered elsewhere

Moderator: Moderators

Post Reply
User avatar
Graham Lawrie
Moderator
Moderator
Posts: 5049
Joined: Thu Nov 06, 2014 7:14 pm
Location: Kinlochleven, Scotland
Contact:

Lazy Susan:)

Post by Graham Lawrie »

I am making a level table from a Lazy Susan:) what do people use for holding the skids down? Mine is wooden:)
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius




CITIZEN # 521
User avatar
KevG
Supporter
Supporter
Posts: 1642
Joined: Fri Nov 07, 2014 4:59 pm
Location: South Wales, UK

Re: Lazy Susan:)

Post by KevG »

Not sure a leveling table would be much point on the lazy Susan as you want to have the heli non moveable so the level is accurate,

I may have mis understood your idea though Graham,
Minor league Aviator, against gravity which normally wins!

RotoriousFPV quads Micro Rad 3" Gat 4" and Rad 5"
D-Quad Obsession
Yuneec Typhoon H
Taranis Qx7,
User avatar
Graham Lawrie
Moderator
Moderator
Posts: 5049
Joined: Thu Nov 06, 2014 7:14 pm
Location: Kinlochleven, Scotland
Contact:

Re: Lazy Susan:)

Post by Graham Lawrie »

Jus need to know what the skids are held with:) I can lock the Susan and i am going to have spirit level adjusters for when using Soko:)
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius




CITIZEN # 521
User avatar
KevG
Supporter
Supporter
Posts: 1642
Joined: Fri Nov 07, 2014 4:59 pm
Location: South Wales, UK

Re: Lazy Susan:)

Post by KevG »

Ah I see, I would say just use some little screw down clamps, with a v or round groove on the underside of the clamp block,
Minor league Aviator, against gravity which normally wins!

RotoriousFPV quads Micro Rad 3" Gat 4" and Rad 5"
D-Quad Obsession
Yuneec Typhoon H
Taranis Qx7,
User avatar
murankar
Supporter
Supporter
Posts: 1557
Joined: Sat Nov 08, 2014 5:29 pm
Location: Mentor, Ohio

Re: Lazy Susan:)

Post by murankar »

I have seen light utility springs used. attach one end to the suzan and the other end should hook to the nose of the air frame. another option is to sandwich the skids between the suzan and a strip of wood across the skids, use a carriage bolt and a butterfly nut to secure each end.
Matthias "URI X3" Urankar | Citizen 00742
Kit: Gaui X3
Servos: BK BL 3001 HV, BL 5005 HV
Motor: Scorpion HK 2520-3500 Kv
TX/RX: Specktrum DX6, VControl
Charger: PowerLabs PL6
Batteries: Pulse Ultra 2250, 35C
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: Lazy Susan:)

Post by Tony »

I've got some pics of mine, I'll dig them out... Also videos on my YT channel

this might give you some ideas, its mine

http://youtu.be/p7_Lcx4XvOk?list=UU9icx ... CllvUBBtMw
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
User avatar
ken jackson
Member
Member
Posts: 280
Joined: Sat Nov 08, 2014 1:17 am
Location: Chesterton, Indiana

Re: Lazy Susan:)

Post by ken jackson »

I like the wood across the skids, seems safer.
48" Edge 540T
Alien RR5
TRex 500 DFC w IKON
AS3X A10
VisionAire Flying Fine
Carbon-Z Yak 54 3x Amazing Plane
Flying Since October 2011 DX8 and Phoenix Simulator
User avatar
cml001
Supporter
Supporter
Posts: 2882
Joined: Fri Nov 07, 2014 4:46 pm
Location: Augusta GA

Re: Lazy Susan:)

Post by cml001 »

Random skid clamps may work... I use the to hang my helis... Awesome clamps.
Attachments
image.jpg
image.jpg (1.99 MiB) Viewed 2785 times
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
User avatar
cml001
Supporter
Supporter
Posts: 2882
Joined: Fri Nov 07, 2014 4:46 pm
Location: Augusta GA

Re: Lazy Susan:)

Post by cml001 »

If u use 4(I only need one per side to hang), 2 on each side it would keep it level on the skids as well as hold it there without the packs in... If the packs aren't in the heli it's tail heavy and leans back.. These clamps would work I think... Little expensive.. Can't remember..10 bucks for 2... Have to look it up.
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: Lazy Susan:)

Post by Tony »

Have you made this lazy Susan yet Graham?
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
User avatar
Graham Lawrie
Moderator
Moderator
Posts: 5049
Joined: Thu Nov 06, 2014 7:14 pm
Location: Kinlochleven, Scotland
Contact:

Re: Lazy Susan:)

Post by Graham Lawrie »

Yes Tony, but no clamps yet:) I am wanting it to be able to clamp all my helis from 150-600:)
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius




CITIZEN # 521
User avatar
Graham Lawrie
Moderator
Moderator
Posts: 5049
Joined: Thu Nov 06, 2014 7:14 pm
Location: Kinlochleven, Scotland
Contact:

Re: Lazy Susan:)

Post by Graham Lawrie »

Tony wrote:I've got some pics of mine, I'll dig them out... Also videos on my YT channel

this might give you some ideas, its mine

http://youtu.be/p7_Lcx4XvOk?list=UU9icx ... CllvUBBtMw
I watched that video when you posted it Tony. Simple but effective:)
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius




CITIZEN # 521
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: Lazy Susan:)

Post by Tony »

That sounds like it's going to be tricky, have you got a large turntable for the 600, my lazy Susan table is too small for the Goliath skids I've got on my 450, there 600 size
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
User avatar
Graham Lawrie
Moderator
Moderator
Posts: 5049
Joined: Thu Nov 06, 2014 7:14 pm
Location: Kinlochleven, Scotland
Contact:

Re: Lazy Susan:)

Post by Graham Lawrie »

I tried the 600 and it fits:)
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius




CITIZEN # 521
User avatar
cml001
Supporter
Supporter
Posts: 2882
Joined: Fri Nov 07, 2014 4:46 pm
Location: Augusta GA

Re: Lazy Susan:)

Post by cml001 »

Yeah the clamps come in different sizes.. So u could space a set for each slightly off to accommodate which ever heli u were setting up.
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: Lazy Susan:)

Post by Tony »

Sounds like those clips are an excellent solution Graham, look forward to hearing some end results, I won't mention vids...lol
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
User avatar
cml001
Supporter
Supporter
Posts: 2882
Joined: Fri Nov 07, 2014 4:46 pm
Location: Augusta GA

Re: Lazy Susan:)

Post by cml001 »

There are different sizes to accommodate whatever skid diameter u have...
Attachments
image.jpg
image.jpg (97.42 KiB) Viewed 2765 times
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: Lazy Susan:)

Post by Tony »

Just the job them Clay, nice one
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
User avatar
cml001
Supporter
Supporter
Posts: 2882
Joined: Fri Nov 07, 2014 4:46 pm
Location: Augusta GA

Re: Lazy Susan:)

Post by cml001 »

They've even got some designed for the Gobby if needed!
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Post Reply

Return to “Other”