Getting to hot, maybe?

Handmade and pre-fab frames, retracts, standoffs, mounts, and other frame accessories, including power distribution

Moderator: Moderators

Post Reply
User avatar
DOG
Member
Member
Posts: 1786
Joined: Fri Mar 06, 2015 4:03 am
Location: Inverness Florida

Getting to hot, maybe?

Post by DOG »

Need advice again. I have a fossil 180 on the way and I was thinking about putting this setup in it. Xnova 1806/2300Kv motors with 20a littlebees esc. I have already the Xnova 2204/2600kv motors that I want to put in my fossil 210. My 210 has the Spedix 2205/2300Kv with spedix 30a esc and she flys marvelous. Can I put the Xnova 2204/2600Kv in the 180 with a 4-1 littlebee 20a esc without getting HOT? or just get the Xnova 1806/2300Kv with the 4-1 littlebee 20a esc for the 180. Why Xnova? I have the Xnova motor for my Guai X3 and it works great plus they are on sale too. Thanks! :)
HK 500 DFC
Gaui X3L
Tarot 450DFC scale/Coastguard
Fossil 180
Fossil 210
Citizen member #00748
User avatar
KevG
Supporter
Supporter
Posts: 1642
Joined: Fri Nov 07, 2014 4:59 pm
Location: South Wales, UK

Re: Getting to hot, maybe?

Post by KevG »

I used to have 2206 2300 cobra running off a 20a 4in1 in my FSGX so I don't think you'll have any issue on the 2600kv xnova in the 180

personally I never had a good feel for my 180 as compared to any of the 5" frames.

The Xnova quad motors defo deserve more praise and use than what they have had, great motors!
Minor league Aviator, against gravity which normally wins!

RotoriousFPV quads Micro Rad 3" Gat 4" and Rad 5"
D-Quad Obsession
Yuneec Typhoon H
Taranis Qx7,
Post Reply

Return to “Frames and Power Distribution”