So, I got to fly one of Kyle Stacy's KSEs

You fly it, you document it. Tell us the story of the day. As always, video is better!

Moderator: Moderators

Forum rules
Members are encouraged to keep either a single thread for all their flying activities or post a thread per aircraft. If you want to make a one-off thread about a particular flight/event go ahead, but please put a link to that thread in your normal flight thread and vice versa.
Post Reply
User avatar
pvolcko
Site Admin
Site Admin
Posts: 2197
Joined: Thu Nov 06, 2014 3:18 pm
Location: Syracuse, NY
Contact:

So, I got to fly one of Kyle Stacy's KSEs

Post by pvolcko »

Had an interesting day today. Suffice it to say, for now, that my flying for the day went one flight longer than I expected, with a crowd of people at a heli jam all looking at me and Kyle Stacy as we walked to the flight line and he flew one of his custom engraved KSEs and then handed over the vcontrol to me and said to take it up.

It survived. As did I.

More to come tomorrow. It's been a long, amazing day.
User avatar
Lee
Moderator
Moderator
Posts: 1824
Joined: Fri Nov 07, 2014 6:16 pm
Location: Tarifa, Spain

Re: So, I got to fly one of Kyle Stacy's KSEs

Post by Lee »

That must have been awesome.
Did you get him to fly yours?
I'd love to get a pro to tune my heli. I'm sure I just fly around my bad tuning, thinking thats as good as it gets.
GOBLIN 570------IKON
WARP 360--------IKON
QAV 500----------Open Pilot
RCXH250---------Open Pilot


Citizen #229
User avatar
Graham Lawrie
Moderator
Moderator
Posts: 5049
Joined: Thu Nov 06, 2014 7:14 pm
Location: Kinlochleven, Scotland
Contact:

Re: So, I got to fly one of Kyle Stacy's KSEs

Post by Graham Lawrie »

AWESOME Paul:) what a brilliant day:) hope you got it on video?
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius




CITIZEN # 521
User avatar
cml001
Supporter
Supporter
Posts: 2882
Joined: Fri Nov 07, 2014 4:46 pm
Location: Augusta GA

Re: So, I got to fly one of Kyle Stacy's KSEs

Post by cml001 »

Did u show him how to do the damn thang? Lol
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
User avatar
Marius
Supporter
Supporter
Posts: 411
Joined: Fri Nov 07, 2014 3:53 pm
Location: Norway

Re: So, I got to fly one of Kyle Stacy's KSEs

Post by Marius »

WOW! That is awesome. I would have been so nervous!
Your new friend from Norway!

Learning To Fly
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: So, I got to fly one of Kyle Stacy's KSEs

Post by Derek »

That's incredible, Paul!!! Very cool!!
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
User avatar
pvolcko
Site Admin
Site Admin
Posts: 2197
Joined: Thu Nov 06, 2014 3:18 pm
Location: Syracuse, NY
Contact:

Re: So, I got to fly one of Kyle Stacy's KSEs

Post by pvolcko »

In a sense you could say he did fly mine as well. And he did tune it.

So here's the story...

This weekend is the Northeast Model Helicopter Jamboree held annually at the Rochester Aero Modeling Society's field in Macedon, NY. This is Kyle Stacy's home field and it is always a great event. Not high profile like OHB or some of the other shows around the country, but it draws in a number of pro pilots each year, has strong sponsorship from various vendors, and gets better and better each year.

This year Bert and Suzi Kammerer made the trip up from Florida, Andrew Merlino flying for AMain Hobbies, AJ Jaffe for team Futaba, and some up and comers such as Chris Diamanti, and a number of others.

The guy that puts it on is Chris Reibert. He's been a team pilot and rep for RC Aerodyne, OXY, MKS servos, Futaba, VControl, and others. He's a regular contributor in RC Heli Pilot magazine. etc. etc. Great guy. Asset to the hobby.

And he has a 2 year old, cute as a button, little girl named Hailey who was diagnosed with Juvenile Rheumatoid Arthritis early this year. The club decided to make a big part of this year's event be a donation to the Arthritis Foundation for research into JA. But how to raise some money for it?

Chris called around with some help from Kyle and rounded up a big old pile of parts donations from SAB Heli Division, Pulse Battery, Scorpion Power Systems, Mikado, and BK Servos. Kyle built it and a grand prize raffle was born!

And this is no normal Goblin 700 KSE. This has the same custom engraved head components that they make for Kyle himself. Kyle has couple of these in his hangar. And then there is this one. In addition Kyle signed the canopy. Rounding out the package is a Scorpion motor and ESC combo, fed by Pulse batteries to power it. BK Servos make it shuck and jive. A new VBar Neo keeps it in line, directed by a VControl transmitter.

A ready to fly, one of very few, Goblin 700 KSE with VControl.

Originally the plan was to hold a silent auction for the item, but after some thought and about 24 hours before the event they decided to make it a raffle instead. 100 tickets would be sold at $50 each, making for pretty good odds, especially if one bought multiple tickets. And by going raffle instead of silent auction, they drummed up a lot more overall interest in the item and the awarding of it. As a silent auction it was clear that if you weren't ready to pony up at least $3k you weren't going home with it, and there aren't many who have the resources to make those kinds of bids. Plus if they sold out the tickets (pretty good chance) they had a guaranteed $5k to donate to the charity, on top of any other donations people made.

I bought 5 tickets. Some bought as many as 10. And I hoped that just maybe I might be lucky...

And I was! Ray Stacy, Kyle's father, mixed up all the slips. Little Hailey reached in and pulled a ticket... right from the top. Ray says, "No no no, dig in there a bit." Throws it back in and Hailey reaches in a pulls out a fist full. Ray helps here separate them out until there is one left and then opens it up. Reads it to himself while Chris is reading it too. Chris laughs and Ray turns and starts talking about the great weather they're having for the event or something. Crowd laughs and then Ray reads the name out loud.

Paul... Volcko...

"No way," I say to myself.

Chris looks right at me and points to me.

"No way!" And I lit up with what must have been the biggest smile I've had in at least a few years.
Picture by Eric Williams
Picture by Eric Williams
ticket.jpg (82.31 KiB) Viewed 2503 times
After a couple pictures with Kyle, Chris, and Hailey...
Picture by Ray Stacy
Picture by Ray Stacy
award.jpg (84.73 KiB) Viewed 2503 times
It was time to get real nervous.

Part of the deal was that you go to the line with Kyle and he'd take it for a quick flight. I thought great. Told him to "tear it up". He proceeds to make a couple rounds of the field and land it. I was watching, but I was in a daze at this point. I don't really recall what he did during the couple of circuits. Said, "nice" or "great" or something like that and thought to myself, "now don't do it..."

He turns to me, extends the transmitter to me and says, "Want to take it up?" "Oh... oh... no..." I'm thinking, but my mouth says, "I don't know." Doh! Chris says, "I've seen your videos, you're fine."

I was about to ask how he has the switches setup but he beats me to it and starts explaining. Turns out we run the same setup on the switches. It's setup for a full-collective range on all three flight modes. Good to go. :)

I take hold of the VControl, first time holding one or really seeing one up close so I'm dazzled by the design and the backlit display and the novelty of it. Feels pretty good in the hand I'm thinking to myself. I'm getting my hands and fingers into position and realize I had just packed up and didn't have my neck strap on. I started to have another bout of second thoughts as I've only rarely flown without a neck strap and never since I started pinching instead of thumbing. When you pinch you only have your pinkies to support the Tx on the back (at least the way I do it) so a neck strap is kind of important for me to feel comfortable and confidant that the thing isn't going to fall to the ground.

I push through the neck strap anxiety after getting my fingers in place and getting a feel for the thing. Feels solid, in my dazed mind. I'm about to flip off TH when Ray pops around Kyle on the right and says, "Really, you don't need to do this if you're too nervous" or something to that effect. I say, "I'm okay. Not going to do anything crazy." (What the hell does my brain-mouth system got going?! Stop already! You had two outs dumbass!) Chris says, "Just hover it."

There's a gallery of people watching me (that top photo only shows the spectators that had gathered for the upcoming night fly and fireworks show, all the pilots and familes were lining the side to the right in that picture), I'm standing next to arguably the best pilot in the world at the moment, and I'm running on a crazy high of adrenaline and dopamine and whatever else gets pumped into the system during something like this.

I flip off TH, bring it up to a hover. Get it about 10-12ft in the air and wiggle the cyclic stick to get a feel for the roll rate setup. It is sluggish, but that's a very good thing since my hands and fingers were probably shaking like mad. (Kyle told me afterward that's set for stock settings in the VBar and VControl, as far as rates and stuff go). I say to myself, "Well, here you are, might as well go for it a little bit." So I flip it to skids out and do a negative collective push out. I pop it a little at the back side of the rainbow and hear someone behind me exclaim "Wow" or something like that. Kyle says I may want to flip up to IU1 if I'm going to be doing that. "No need, that's all for that." I bring it back towards us and do a big slow backwards loop and then land it with a mini-auto.

"Holy shit. That just happened," I'm thinking to myself.

I'm still dazed during all this. I think that's all I did in the flight, but I honestly don't know for sure. Those are the only two things I remember doing, and I'm only 90% sure I actually did do them.

Any way, I make sure I'm flipped to TH and Kyle pulls the canopy and disconnects power and we head back to the fence to collect everything. I shake hands with Kyle thanking him for everything, same with Chris, Ray, and then Bert Kammerer comes out to us and I shake his hand and thank him as well. Chris asks what servos I run on my other KSE and I say BKs, he tells Bert as he's walking away and he says something... again dazed and tripping on endorphines. I probably grunted at him for all I know.

Kyle takes me back to his trailer and gives me a box (I recognize it from the kit I built as the one with all the baggies of parts in it) and shows me that he threw in some extra SupraX6 connectors (good, since I'll need to make a charging adapter or two at least), explained that the Scorpion ESC has a BEC in it but it didn't have enough to power the servos so there's a flight pack on it for the electronics, etc. Also said it's running the Vbar gov so it can be controlled from the transmitter and when I plug it into the computer it will ask me to register it, etc.

So I pack it all into the truck, after shifting a bunch of stuff around, wasn't planning to have a whole extra 700 size heli and transmitter going back with me.

And that's the story of how I got to fly one of Kyle Stacy's KSEs and he flew mine too. It hasn't been "tuned" by him, persay. But he built it and set it up so good enough for me. :)

No, I don't personally have video of the flight. I'll be asking people if anyone took one and will post it up if I find one.
Paul Volcko
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
User avatar
pvolcko
Site Admin
Site Admin
Posts: 2197
Joined: Thu Nov 06, 2014 3:18 pm
Location: Syracuse, NY
Contact:

Re: So, I got to fly one of Kyle Stacy's KSEs

Post by pvolcko »

Some pics I took today. More to come.
20150830_134741_resize_1024w.jpg
20150830_134741_resize_1024w.jpg (161.71 KiB) Viewed 2503 times
20150830_134751_resize_1024w.jpg
20150830_134751_resize_1024w.jpg (163.19 KiB) Viewed 2503 times
20150830_134756_resize_1024w.jpg
20150830_134756_resize_1024w.jpg (133.12 KiB) Viewed 2503 times
20150830_134813_resize_1024w.jpg
20150830_134813_resize_1024w.jpg (103.98 KiB) Viewed 2503 times
20150830_134908_resize_1024w.jpg
20150830_134908_resize_1024w.jpg (117.13 KiB) Viewed 2503 times
20150830_134918_resize_1024w.jpg
20150830_134918_resize_1024w.jpg (111.25 KiB) Viewed 2503 times
Paul Volcko
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
User avatar
cml001
Supporter
Supporter
Posts: 2882
Joined: Fri Nov 07, 2014 4:46 pm
Location: Augusta GA

Re: So, I got to fly one of Kyle Stacy's KSEs

Post by cml001 »

Just awesome Paul!.. Great Birthday for u this year! Lol.. 2 KSE Goblins.. U dog.. Lol.. Look atcha smile'n... Lol
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
User avatar
Kickedd7371
Member
Member
Posts: 153
Joined: Tue Aug 18, 2015 7:28 am
Location: Western Australia

Re: So, I got to fly one of Kyle Stacy's KSEs

Post by Kickedd7371 »

Wow that is absolutely insane !!! :) Congrats !!!

Would definitely be interested in a comparison in terms of performance between the two KSE machines you have, especially once you have spent a little more time with it. Such as how the the ikon compares to the vbar and how those servos (7002) compare to the bk 8001s :)
User avatar
pvolcko
Site Admin
Site Admin
Posts: 2197
Joined: Thu Nov 06, 2014 3:18 pm
Location: Syracuse, NY
Contact:

Re: So, I got to fly one of Kyle Stacy's KSEs

Post by pvolcko »

Will have to put some flights on it. First order of business is to solder up some adapters for EC5 -> SupraX6 . I figure the pack has a couple minutes of flight time left on it at the moment. :)

Order up a new canopy and a new three blade head hub so I can stash those away for display and if I ever want to sell it.

Then I have to play with the VControl and figure out how that all works along with the VBar Neo. See if it has bank setups like Ikon or what. Get a couple different roll rate setups going.

Then make up a cable to charge the Rx battery.

Then finally I get to fly it again!
Paul Volcko
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
User avatar
ken jackson
Member
Member
Posts: 280
Joined: Sat Nov 08, 2014 1:17 am
Location: Chesterton, Indiana

Re: So, I got to fly one of Kyle Stacy's KSEs

Post by ken jackson »

Amazing story Paul, Congratulations. I still can't believe you won it. I would be so afraid to fly it, I'd probably never do much more than some figure 8's, LOL

Ken
48" Edge 540T
Alien RR5
TRex 500 DFC w IKON
AS3X A10
VisionAire Flying Fine
Carbon-Z Yak 54 3x Amazing Plane
Flying Since October 2011 DX8 and Phoenix Simulator
User avatar
pvolcko
Site Admin
Site Admin
Posts: 2197
Joined: Thu Nov 06, 2014 3:18 pm
Location: Syracuse, NY
Contact:

Re: So, I got to fly one of Kyle Stacy's KSEs

Post by pvolcko »

cml001 wrote:Just awesome Paul!.. Great Birthday for u this year! Lol.. 2 KSE Goblins.. U dog.. Lol.. Look atcha smile'n... Lol
Yes, it was a great belated gift from the luck gods. :)
Kickedd7371 wrote:Would definitely be interested in a comparison in terms of performance between the two KSE machines you have, especially once you have spent a little more time with it. Such as how the the ikon compares to the vbar and how those servos (7002) compare to the bk 8001s :)
I don't know about the 7002 vs 8001 comparison. I'm not good enough to tell the difference, I'm sure.

But I'll definitely be doing some posts on the ikon vs 7200bx vs vbar. Also DX9 vs DX7s vs VControl.
ken jackson wrote:Amazing story Paul, Congratulations. I still can't believe you won it. I would be so afraid to fly it, I'd probably never do much more than some figure 8's, LOL
I'm amazed I managed to fly it at the event without crashing it. The mini-auto was from 3ft or so and I hadn't gotten used to the collective yet so I did hop it a little bit just before touchdown. Still searching for video. My camera glasses wouldn't have been good since it was all done when the sun was getting low in the sky. The glasses have sunglass lenses so I wouldn't have seen anything while I was flying. :)
Paul Volcko
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
User avatar
Graham Lawrie
Moderator
Moderator
Posts: 5049
Joined: Thu Nov 06, 2014 7:14 pm
Location: Kinlochleven, Scotland
Contact:

Re: So, I got to fly one of Kyle Stacy's KSEs

Post by Graham Lawrie »

Wow Paul:) what an amazing story and an amazing time you have had:)
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius




CITIZEN # 521
User avatar
Lee
Moderator
Moderator
Posts: 1824
Joined: Fri Nov 07, 2014 6:16 pm
Location: Tarifa, Spain

Re: So, I got to fly one of Kyle Stacy's KSEs

Post by Lee »

What a lucky boy. :D
Sounds like the whole event was an amazing experience.
GOBLIN 570------IKON
WARP 360--------IKON
QAV 500----------Open Pilot
RCXH250---------Open Pilot


Citizen #229
User avatar
pvolcko
Site Admin
Site Admin
Posts: 2197
Joined: Thu Nov 06, 2014 3:18 pm
Location: Syracuse, NY
Contact:

Re: So, I got to fly one of Kyle Stacy's KSEs

Post by pvolcko »

It's always a good show. I've been to it three times now. This was my first time staying to see the night fly and fireworks show. Usually this is the same weekend as my club's air show so I need to leave early to get to sleep and up early the next day. This year they fell on different weekends, though, so I got to stay late! :)
Paul Volcko
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
Post Reply

Return to “Member Flight Logs”