Derek's Flight Log

You fly it, you document it. Tell us the story of the day. As always, video is better!

Moderator: Moderators

Forum rules
Members are encouraged to keep either a single thread for all their flying activities or post a thread per aircraft. If you want to make a one-off thread about a particular flight/event go ahead, but please put a link to that thread in your normal flight thread and vice versa.
Post Reply
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Derek's Flight Log

Post by Derek »

Despite the cold, I went flying today. It wasn't so bad until the wind did start picking up a bit...but my wife ran the camera for me and I flew my 600, Blue Cub, and had a maiden.

Here is the Trex 600 Pro DFC flight video

https://www.youtube.com/watch?v=bjjiFbfRygA

Here is the Blue Cub STOL flight video

https://www.youtube.com/watch?v=WwWXgysHuTo

I'll get the other flight video loaded soon...
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: Derek's Flight Log

Post by Derek »

Here is the maiden flight of my Specter scratch build. "ibcrazy" on Youtube designed this plane. He and Jeremiah (StoneBlueAirlines on Youtube) both have flown this plane in many videos. I wanted one, so I made one.

https://www.youtube.com/watch?v=bXfUyTVYlkc

***EDIT***

Sorry about that, Tony! Not sure why, or how, I had it set for "Private" but it was indeed set that way. I've changed it to "Public", so hopefully the video shows up now.
Last edited by Derek on Mon Dec 22, 2014 4:11 am, edited 2 times in total.
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: Derek's Flight Log

Post by Tony »

Nice flying Derek, I do really like that cub mind.... Awesome bird....last vid is private, don't think you've published it yet
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: Derek's Flight Log

Post by Derek »

Sorry about that, Tony! I made the change to Public and the video is now viewable.
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: Derek's Flight Log

Post by Tony »

Nice maiden on that last vid Derek... You do make some cool stuff bro...
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: Derek's Flight Log

Post by Derek »

Thanks Tony! I need to order 6 new servos for another creation. Once the servos get here, I can maiden that plane. I also have to tidy up my FPV canard and then we'll have the maiden for it. I also have a 60" scratch built foam board "Big Stick" that will be ready for a maiden very soon, too. Oh....I also have another twin boom pusher, very FPV possible, that is waiting for electronics...then it could be maidened, too, lol. Then...I also have my 74" scratch built 3D plane to get some landing gear for and install the electronics (I have all the electronics and props) and then it will be ready for a maiden. Oh my...one more....I have a lightly used Trex 500 Pro DFC that is waiting for a new Ikon unit and I have some minor repairs to make on my Trex 500e flybarred.

Busy Busy Busy!!!
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: Derek's Flight Log

Post by Derek »

I was just watching my Trex 600 flight, from the other day, and I noticed that at 0:52 in the video, it almost sounded like the helicopter was trying to "overspeed", lol.
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
Post Reply

Return to “Member Flight Logs”