Mini Quad 250:)

Graham Lawrie · Post by **Graham Lawrie** » Thu Nov 13, 2014 8:45 pm

Well at last i have got the board to arm:) all settings now to do:) Maiden this weekend with video Tony:)

Great to see the Baseflight programme working and adjusting the way it should:)

Post by **danhampson** » Thu Nov 13, 2014 8:52 pm

Sweet are you going to get the maiden in video Graham?

Lee · Post by **Lee** » Thu Nov 13, 2014 9:07 pm

What was the issue? Don't keep us in suspense?
So you are running baseflight, not Cleanflight?

Graham Lawrie · Post by **Graham Lawrie** » Thu Nov 13, 2014 9:14 pm

Yes Dan Maiden in video:)

Lee it is Baseflight:) The issue was the wiring from the board to the receiver. I thought i had it right followed a video on youtube and it is different.

The board is TAER1234 i had AERT1234:)

I am going to do a video to help others as stupid as me:)

Tony · Post by **Tony** » Thu Nov 13, 2014 9:21 pm

Haha, brilliant Graham, I'll look forward to the vid mate

Lee · Post by **Lee** » Fri Nov 14, 2014 10:57 am

I have been watching the progress of cleanflight.
Seems to be way better than baseflight, with more functionality and support.
It can be loaded to Nase32 and OP CC3D.
I may try it on one of my boards.

Tony · Post by **Tony** » Fri Nov 14, 2014 11:02 am

Are you putting that in the RCX Lee?

Lee · Post by **Lee** » Fri Nov 14, 2014 11:08 am

No, it will be the OP software. I just want to try it out.

Tony · Post by **Tony** » Fri Nov 14, 2014 11:39 am

The OP certainly looks like a first class platform for the quad.

Graham Lawrie · Post by **Graham Lawrie** » Sat Nov 15, 2014 11:13 am

I have one motor going faster than the rest and i have calibrated esc,s several times? any suggestions guys?:)

Lee · Post by **Lee** » Sat Nov 15, 2014 11:54 am

I need to get a Nase32 to see how these things work.

Graham Lawrie · Post by **Graham Lawrie** » Sat Nov 15, 2014 1:43 pm

I still need to trim it, had a quick flight in the back garden and it is to twitchy:) It appears to want to fly back all the time so i am counteracting that. Loads of power in it.
I tried a video but it was just seconds as i knew it was not right. Will try and post it:) It is quite funny:)

Lee · Post by **Lee** » Sat Nov 15, 2014 8:22 pm

I have 30% expo on mine Graham
Do you have it CG in the middle?

Graham Lawrie · Post by **Graham Lawrie** » Sat Nov 15, 2014 8:44 pm

Lee wrote:I have 30% expo on mine Graham
Do you have it CG in the middle?

CG not bad, no expo , on TX i take it? 30 on everything?:)

Lee · Post by **Lee** » Sat Nov 15, 2014 8:52 pm

For Aileron and Elevator. For rudder, whatever you feel is good

Graham Lawrie · Post by **Graham Lawrie** » Sat Nov 15, 2014 8:55 pm

OK Lee:) It was way too twitchy:) reset the board and started again as i put youtube settings in to allow it to roll and flip quicker:)

RC-Hangout

Mini Quad 250:)

Mini Quad 250:)

Re: Mini Quad 250:)

Re: Mini Quad 250:)

Re: Mini Quad 250:)

Re: Mini Quad 250:)

Re: Mini Quad 250:)

Re: Mini Quad 250:)

Re: Mini Quad 250:)

Re: Mini Quad 250:)

Re: Mini Quad 250:)

Re: Mini Quad 250:)

Re: Mini Quad 250:)

Re: Mini Quad 250:)

Re: Mini Quad 250:)

Re: Mini Quad 250:)

Re: Mini Quad 250:)