Whats on the work Table

Tony · Post by **Tony** » Wed Nov 19, 2014 8:27 am

That thing would scare the living day lights out of me.. Haha

murankar · Post by **murankar** » Wed Nov 19, 2014 7:38 pm

The real question is: Does the second motor work, or is it a dead motor needing rebuilt? Either way you got lucky on the find. Just hope the hardware works.

Superbad · Post by **Superbad** » Thu Nov 20, 2014 12:43 am

murankar wrote:The real question is: Does the second motor work, or is it a dead motor needing rebuilt? Either way you got lucky on the find. Just hope the hardware works.

The guy I got it from said it dose run but could use a rebuild soon

cml001 · Post by **cml001** » Thu Nov 20, 2014 1:01 am

Superbad · Post by **Superbad** » Thu Nov 20, 2014 1:04 am

So I need to do something with my spare parts for the Outrage Velocity 50
SO here is what I came up with
first drawer spare parts
second is a full disassembled asm.
third is a full asm.

murankar · Post by **murankar** » Thu Nov 20, 2014 1:05 am

Thats a lot of spares, but those will go quick in a crash or two.

Superbad · Post by **Superbad** » Thu Nov 20, 2014 1:09 am

murankar wrote:Thats a lot of spares, but those will go quick in a crash or two.

HUSH your Mouth MR

LOL

Superbad · Post by **Superbad** » Thu Nov 20, 2014 1:20 am

Also got the new controller in today . Now have to unwire the mini K Bar and rerun all the wiring

murankar · Post by **murankar** » Thu Nov 20, 2014 1:24 am

Okay you got me this time. Just watch yourself, you might find a crash sign on your back one day, lol.

cml001 · Post by **cml001** » Thu Nov 20, 2014 1:24 am

Lol... I have a little system I use as well... I keep used/crashed parts that aren't bad in one bag/box, brand new spares in one... Separated by section(head, tail, frame, etc)... U gotta have a system that works for ya... At times I think I'm too anal with it and let the lab(rc room) go to crap... As it is now.. Lol... I gotta clean it up!

Superbad · Post by **Superbad** » Thu Nov 20, 2014 1:28 am

Mine is pretty trashed right now from all the boxes I have been getting over the last week
no time to clean when trying to get the heli finished

cml001 · Post by **cml001** » Thu Nov 20, 2014 1:37 am

Lol.. My excuse as well.. I just put the 450 back together.. Still haven't put everything back in its spot since the fun fly the other weekend.. And I've got a HUGE 72" wingspan Yak 54 w a DLE 30 taking up all the floor space.. I've been tinkering w the electronics on it so the wings are still mounted... I want a shop for my rc stuff.

Post by **danhampson** » Thu Nov 20, 2014 6:45 am

Wow that's a cool stash of parts, I tend to buy just what I need at the time, my workshop is my kitchen for now.

cml001 wrote:Lol.. My excuse as well.. I just put the 450 back together.. Still haven't put everything back in its spot since the fun fly the other weekend.. And I've got a HUGE 72" wingspan Yak 54 w a DLE 30 taking up all the floor space.. I've been tinkering w the electronics on it so the wings are still mounted... I want a shop for my rc stuff.

What's happening with the yak? I can't wait to see that. I think my next project will be a gas plane 30-35cc, I want smoke lol.

ken jackson · Post by **ken jackson** » Thu Nov 20, 2014 10:03 am

So when do you think you'll be ready for a test flight?

Superbad · Post by **Superbad** » Thu Nov 20, 2014 8:01 pm

ken jackson wrote:So when do you think you'll be ready for a test flight?

Well the main blades should be here today. will have to go get fuel maybe this weekend
I have to get the Full save size K bar wired up and every thing back in place Hope to have that done tonight

Superbad · Post by **Superbad** » Thu Nov 20, 2014 8:03 pm

danhampson wrote:Wow that's a cool stash of parts, I tend to buy just what I need at the time, my workshop is my kitchen for now.

cml001 wrote:Lol.. My excuse as well.. I just put the 450 back together.. Still haven't put everything back in its spot since the fun fly the other weekend.. And I've got a HUGE 72" wingspan Yak 54 w a DLE 30 taking up all the floor space.. I've been tinkering w the electronics on it so the wings are still mounted... I want a shop for my rc stuff.

What's happening with the yak? I can't wait to see that. I think my next project will be a gas plane 30-35cc, I want smoke lol.

Well Im trying to keep it flying for a while they dont make parts for it anymore so I bought up a few frames and parts that I could get

cml001 · Post by **cml001** » Fri Nov 21, 2014 3:26 am

Got a grin buddy... Mmmmmm... Nitro!

cml001 · Post by **cml001** » Fri Nov 21, 2014 3:28 am

Well.. Imma be posting about the Yak here over the weekend.. Stay tuned!... Lol.. I said tuned!

Superbad · Post by **Superbad** » Fri Nov 21, 2014 4:49 am

Well got the rotor head all set back up with the new controller . Now on to the tail .
I did get the main blades in 626mm rail blades Ill post a picture once I finish setup . I will say this the rotor span is over 4 feet

Tony · Post by **Tony** » Fri Nov 21, 2014 11:27 am

4 feet, wow, cant wait to see this bird in action... thats nearly as big as my mrs.....lol. dont say out to her....haha

RC-Hangout

Whats on the work Table

Re: Whats on the work Table

Re: Whats on the work Table

Re: Whats on the work Table

Re: Whats on the work Table

Re: Whats on the work Table

Re: Whats on the work Table

Re: Whats on the work Table

Re: Whats on the work Table

Re: Whats on the work Table

Re: Whats on the work Table

Re: Whats on the work Table

Re: Whats on the work Table

Re: Whats on the work Table

Re: Whats on the work Table

Re: Whats on the work Table

Re: Whats on the work Table

Re: Whats on the work Table

Re: Whats on the work Table

Re: Whats on the work Table

Re: Whats on the work Table