Paul's Flight Log
Moderator: Moderators
Forum rules
Members are encouraged to keep either a single thread for all their flying activities or post a thread per aircraft. If you want to make a one-off thread about a particular flight/event go ahead, but please put a link to that thread in your normal flight thread and vice versa.
Members are encouraged to keep either a single thread for all their flying activities or post a thread per aircraft. If you want to make a one-off thread about a particular flight/event go ahead, but please put a link to that thread in your normal flight thread and vice versa.
Re: Paul's Flight Log
Yeah, I'll take a panoramic sweep in my next vid. I take off and land in my back yard, but most of the actual flying is in my neighbor's back yard. I've about an acre or so of flying area and then my neighbor has another 2 or so. Plus flying over the woods in the back back.
Paul Volcko
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
Re: Paul's Flight Log
Actually...
https://youtu.be/wZa_ueSlEp8
Here's some vid from the 350QX (haven't flown that in forever, should light it up and give it a try again). You get a good picture of the area I fly in in the back. If you pause at 11 sec you'll see two trees on either side of the frame. One on the left is where I pilot from. On the right is the tree you see in the prior video where i'm taking off and landing.
https://youtu.be/wZa_ueSlEp8
Here's some vid from the 350QX (haven't flown that in forever, should light it up and give it a try again). You get a good picture of the area I fly in in the back. If you pause at 11 sec you'll see two trees on either side of the frame. One on the left is where I pilot from. On the right is the tree you see in the prior video where i'm taking off and landing.
Paul Volcko
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
- Graham Lawrie
- Moderator
- Posts: 5049
- Joined: Thu Nov 06, 2014 7:14 pm
- Location: Kinlochleven, Scotland
- Contact:
Re: Paul's Flight Log
Nice flight Paul:) for LOS that was very good with the flips as well:)
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius
CITIZEN # 521
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius
CITIZEN # 521
Re: Paul's Flight Log
Nice flying there Paul, don't know how you see it when it was right up the field, I'd of lost orientation... Old age eh..
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
Re: Paul's Flight Log
Two flights from yesterday. Last two on these aircraft for the day, so hopefully the represent the best of the day.
https://youtu.be/cXJe1GKpugQ
https://youtu.be/cXJe1GKpugQ
Paul Volcko
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
Re: Paul's Flight Log
I hear ya boi! I do like that 3 bladed Gobby! After watch'n this... I know imma love that KDE 505! Good flights! Smooth'n out those half piros nicely!
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Pulse Battery
Castle Creations
Morgan Fuel
Re: Paul's Flight Log
What's ur flight time on that setup? Come down cool, warm, or hot? Didn't hear any bog'n.. Sounded really good!
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Pulse Battery
Castle Creations
Morgan Fuel
Re: Paul's Flight Log
Timer is 4min if I remember right. And I usually over fly 20-30sec. Comes down with 3.8v/cell. Motor gets on the lower side of hot. Haven't shot it with the ir thermo but by finger I can only hold it there for a couple seconds before it gets uncomfortable. Esc is cool to warm. Even in 90deg ambient air it only gets up to 140ish deg according to logs. Only occasional spikes to 170A. Not sure what pitch I'm running. I've tweaked it a bit since initial setup at 12deg.
Re: Paul's Flight Log
Thanks on the compliment btw. Thinking I've got to start in on full piro flips now. The gob 500 flight had my first decent backwards figure 8. Need a lot more practice on the backward flying. Still thinking a lot before and during each direction change.
Re: Paul's Flight Log
Lol... Me too.
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Pulse Battery
Castle Creations
Morgan Fuel
- danhampson
- Site Admin
- Posts: 1746
- Joined: Thu Nov 06, 2014 2:54 pm
- Location: Manchester, United Kingdom
- Contact:
Re: Paul's Flight Log
wow that goblin 700 is a beast paul, it looks fast as hell but very controllable, excellent flights mate.
FPV addict.
Re: Paul's Flight Log
That was unbelievable flying Paul, truly awesome to watch... Nice one mate
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
Re: Paul's Flight Log
Got a bunch of flying in today. Crashed the 500 hard. Inverted. Must have dumb thumbed it, but I swear I put in full negative collective. Odd one.
Got the canopy on the KSE all done. Not horrible for a first try at this kind of mod. Not as cleanly done as I had hoped though. Pics tomorrow.
Got the canopy on the KSE all done. Not horrible for a first try at this kind of mod. Not as cleanly done as I had hoped though. Pics tomorrow.
Re: Paul's Flight Log
Sorry to hear bout the 500... Must be the red headed step child of the bunch... U beat the shit outta that bird, dontcha! Lol.. Seems the way my 450 is... She's always wrecked.. Matter of fact my 450 is busted in the background of my current build's photos. Lol
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Pulse Battery
Castle Creations
Morgan Fuel
- Graham Lawrie
- Moderator
- Posts: 5049
- Joined: Thu Nov 06, 2014 7:14 pm
- Location: Kinlochleven, Scotland
- Contact:
Re: Paul's Flight Log
Unlucky Paul:( did you video it? What was the damage?
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius
CITIZEN # 521
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius
CITIZEN # 521
Re: Paul's Flight Log
No video from yesterday.
Not sure on damages. Still need to tear it down. Def a tail pushrod and tail blades. Main gear Jesus bolt. Blade links. Boom bolts. Tail belt. Two sets of servo gears. Probably main shaft. Maybe spindle shaft.
Canopy looks repairable. Boom looked okay. Frame skids main blades tail fin all good.
Going to rip it all apart this time. Make sure bearings and shafts and stuff are all good.
Yes this is my beater.
Not sure on damages. Still need to tear it down. Def a tail pushrod and tail blades. Main gear Jesus bolt. Blade links. Boom bolts. Tail belt. Two sets of servo gears. Probably main shaft. Maybe spindle shaft.
Canopy looks repairable. Boom looked okay. Frame skids main blades tail fin all good.
Going to rip it all apart this time. Make sure bearings and shafts and stuff are all good.
Yes this is my beater.
Re: Paul's Flight Log
Lol... We all need at least one!
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Pulse Battery
Castle Creations
Morgan Fuel
Re: Paul's Flight Log
Got some video of today's flights. Will edit it up and post tomorrow. Woo!
- Graham Lawrie
- Moderator
- Posts: 5049
- Joined: Thu Nov 06, 2014 7:14 pm
- Location: Kinlochleven, Scotland
- Contact:
Re: Paul's Flight Log
Cool cant wait:)
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius
CITIZEN # 521
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius
CITIZEN # 521
Re: Paul's Flight Log
http://youtu.be/joq766ZZ31Y
Still uploading. Will take 50ish minutes for it to complete. Bed time though, so I'm letting it run.
Still uploading. Will take 50ish minutes for it to complete. Bed time though, so I'm letting it run.
Paul Volcko
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9