Racing mini quad lighting

Discussion, questions, builds, and tutorials on micro and mini (250 and under) size multi-rotors.

Moderator: Moderators

Post Reply
User avatar
danhampson
Site Admin
Site Admin
Posts: 1746
Joined: Thu Nov 06, 2014 2:54 pm
Location: Manchester, United Kingdom
Contact:

Racing mini quad lighting

Post by danhampson »

I saw this video.

https://www.youtube.com/watch?v=NsxyV-kgfio

My question is would i be able to run some 5v LED's off the cc3d/BEC

these are the lights

http://www.ebay.co.uk/itm/LED-Light-Str ... 1456031563

Ive done some calculations and they would draw 0.8amp
FPV addict.
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: Racing mini quad lighting

Post by Tony »

I think you would need to calculate what everything else is going to be drawing from the BEC's 5volt bus Dan, including any surge currents... Personally I'd run LEDs directly from the lipo so your not running any risk of taking current from the 5 volt system bus...

800mA isn't a great deal but could could be disastrous if it takes the BEC over it's limit.

The led strips I have on my hk450 were 12 volt running directly from the 3S lipo

That's just my opinion...

By the way that video is totally awesome, makes you want to get into that type of flying... I will be at Xmas..lol
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
User avatar
cml001
Supporter
Supporter
Posts: 2882
Joined: Fri Nov 07, 2014 4:46 pm
Location: Augusta GA

Re: Racing mini quad lighting

Post by cml001 »

KOOL!
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
User avatar
murankar
Supporter
Supporter
Posts: 1557
Joined: Sat Nov 08, 2014 5:29 pm
Location: Mentor, Ohio

Re: Racing mini quad lighting

Post by murankar »

Personally I would do what tony stated. run off the lypo if you could. The last thing you need is for the 5v bus to go below required voltage. This could cause a brown out and other issues. see if you can run off the lipo.
Matthias "URI X3" Urankar | Citizen 00742
Kit: Gaui X3
Servos: BK BL 3001 HV, BL 5005 HV
Motor: Scorpion HK 2520-3500 Kv
TX/RX: Specktrum DX6, VControl
Charger: PowerLabs PL6
Batteries: Pulse Ultra 2250, 35C
User avatar
Stambo
Member
Member
Posts: 1349
Joined: Thu Nov 20, 2014 7:13 pm
Location: Whangarei New Zealand

Re: Racing mini quad lighting

Post by Stambo »

Yup I agree with everyone so far. Get 12v leds and run straight from your lipos.
Or use a dedicated bec.
Don't risk overloading flight bec.
RCX 250 Minquad FPV addiction
500 X quad FPV/AP platform
450 X quad set up for night flight
Multiple WLToys V911, V949, V959
Taranis, Turnigy 9X
Fatshark Predator, Immersion 5800 Duo
Trex 500 Esky Belt CP V2
User avatar
Lee
Moderator
Moderator
Posts: 1824
Joined: Fri Nov 07, 2014 6:16 pm
Location: Tarifa, Spain

Re: Racing mini quad lighting

Post by Lee »

Yep 12V LEDs. I have a bunch of them.
Simply wire them to the Power board you have coming with your quad.
Plenty of pads on there to solder to.
I have a strip of blue across the back, Star Wars style :D
GOBLIN 570------IKON
WARP 360--------IKON
QAV 500----------Open Pilot
RCXH250---------Open Pilot


Citizen #229
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: Racing mini quad lighting

Post by Tony »

Need some on the back of mine Lee for orientation I think
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
User avatar
Stambo
Member
Member
Posts: 1349
Joined: Thu Nov 20, 2014 7:13 pm
Location: Whangarei New Zealand

Re: Racing mini quad lighting

Post by Stambo »

Tony wrote:Need some on the back of mine Lee for orientation I think
Forget orientation, fly FPV. :)
RCX 250 Minquad FPV addiction
500 X quad FPV/AP platform
450 X quad set up for night flight
Multiple WLToys V911, V949, V959
Taranis, Turnigy 9X
Fatshark Predator, Immersion 5800 Duo
Trex 500 Esky Belt CP V2
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: Racing mini quad lighting

Post by Tony »

Stambo wrote:
Tony wrote:Need some on the back of mine Lee for orientation I think
Forget orientation, fly FPV. :)
I will be Stambo, got all the gear now, but just for practice I'll still fly LOS I think.. Plus it means other fpv pilots can see me in front...haha
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
User avatar
danhampson
Site Admin
Site Admin
Posts: 1746
Joined: Thu Nov 06, 2014 2:54 pm
Location: Manchester, United Kingdom
Contact:

Re: Racing mini quad lighting

Post by danhampson »

I was thinking it would also make it easier to find.
FPV addict.
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: Racing mini quad lighting

Post by Tony »

Good point Dan...
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
User avatar
Graham Lawrie
Moderator
Moderator
Posts: 5049
Joined: Thu Nov 06, 2014 7:14 pm
Location: Kinlochleven, Scotland
Contact:

Re: Racing mini quad lighting

Post by Graham Lawrie »

Thats similar to the ones i have Dan:) great video, i to want the lights to find mine+my beeper and a float when i can get it:) All the safety devices cause i cant fly:)
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius




CITIZEN # 521
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: Racing mini quad lighting

Post by Tony »

Yes I agree Graham, you tend to learn a lesson when you've lost an aircraft altogether... I know exactly what it's like. Mines still a submarine...lol
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
User avatar
danhampson
Site Admin
Site Admin
Posts: 1746
Joined: Thu Nov 06, 2014 2:54 pm
Location: Manchester, United Kingdom
Contact:

Re: Racing mini quad lighting

Post by danhampson »

ive done alot of searching and found these http://www.ebay.co.uk/itm/DOLLS-HOUSE-S ... 27ee86747b ive ordered a strip to put on the back of my quad.
FPV addict.
User avatar
Graham Lawrie
Moderator
Moderator
Posts: 5049
Joined: Thu Nov 06, 2014 7:14 pm
Location: Kinlochleven, Scotland
Contact:

Re: Racing mini quad lighting

Post by Graham Lawrie »

Good link Dan:) just bought some to:)
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius




CITIZEN # 521
User avatar
Lee
Moderator
Moderator
Posts: 1824
Joined: Fri Nov 07, 2014 6:16 pm
Location: Tarifa, Spain

Re: Racing mini quad lighting

Post by Lee »

They'll do the job :)
GOBLIN 570------IKON
WARP 360--------IKON
QAV 500----------Open Pilot
RCXH250---------Open Pilot


Citizen #229
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: Racing mini quad lighting

Post by Tony »

Nice one Dan, those are better than the 5volt ones...
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
Post Reply

Return to “Micros and Minis”