Stambo's Flight Log

Graham Lawrie · Post by **Graham Lawrie** » Fri Jan 09, 2015 12:09 pm

Nice weather:)

Stambo · Post by **Stambo** » Fri Jan 09, 2015 8:00 pm

danhampson wrote:Nice flight mate. how many degree/s have you got your flight controller set at?

Naze does not have degree/s setting, it has roll/pitch rate that I have set to 40.

This is my current settings but I am always making little adjustments to see what changes.
That way I learn what effect each setting has and what to change if something is not right.
I am currently running Gemfan 5x4 props.
Once my 5x4 HQ props arrive, which are a lot stiffer, I will probably start tweaking again.

: 2.JPG (45.83 KiB) Viewed 2414 times

Graham Lawrie · Post by **Graham Lawrie** » Fri Jan 09, 2015 10:33 pm

I have carbon fiber ones to fit once i crash /use the vast amount of spare Gemfan ones i have:)

Stambo · Post by **Stambo** » Sat Jan 10, 2015 1:09 am

Graham Lawrie wrote:I have carbon fiber ones to fit once i crash /use the vast amount of spare Gemfan ones i have:)

I don't think your carbon fibre props will last long.

These things are made to crash.
I regard props as a consumable.
If you FPV fly a miniquad and don't break props, you are not flying it hard enough.

Post by **danhampson** » Sat Jan 10, 2015 9:47 am

Stambo wrote:If you FPV fly a miniquad and don't break props, you are not flying it hard enough.

LOL i ordered another 4 sets yesterday giving me a total of 8 sets, for now.

Graham Lawrie · Post by **Graham Lawrie** » Sat Jan 10, 2015 1:49 pm

I have 10 sets and only flown 4 times with the MK1 and once with MK2:) MK2 has the original props:) Not flying it hard yet due to weather, flu, and not wanting MK2 to fly away and get lost:)LOL

Stambo · Post by **Stambo** » Sun Feb 08, 2015 6:30 am

Did a few batteries seeing just how fast I could get and how close to the ground I could maintain. Forgot to angle the Mobius up a bit more.
Video quality is not that great but I wanted to get it uploaded a bit quicker.
The little oops at the end only broke one prop.

https://www.youtube.com/watch?v=PJ2BLELyMhA

Got a few more from today that I need to edit and upload too.

Post by **pvolcko** » Sun Feb 08, 2015 4:08 pm

Nice. Was your fpv cam angled up more?

Seems you're getting much more comfortable flying it... oops. 1:12.

Live blogging the vid!

Stambo · Post by **Stambo** » Sun Feb 08, 2015 8:29 pm

pvolcko wrote:Nice. Was your fpv cam angled up more?

Seems you're getting much more comfortable flying it... oops. 1:12. Live blogging the vid!

Yeah FPV cam is at about 15 degrees up.
I usually space the front of the Mobius up a bit also but I had removed the spacer to get some video I could snap pics out of and forgot to put it back.

Tony · Post by **Tony** » Sun Feb 08, 2015 9:36 pm

Holy crap.... That's super fast flying... Lol, is that sped up... .?

Stambo · Post by **Stambo** » Mon Feb 09, 2015 2:15 am

Tony wrote:Holy crap.... That's super fast flying... Lol, is that sped up... .?

Nope, real time.

Mate has just built a Qav250 4s running 6x4.5 props, kiss ESCs and 2000 kv Luminier motors.
That thing is wicked fast, and so quiet too.
I can maybe out fly him in the tight stuff but don't stand a chance in a straight line.

Hmmm what can I sell, I WANT A BLACKOUT!!!

Post by **danhampson** » Mon Feb 09, 2015 3:04 am

Have you got the oneshot enabled on the kiss esc's?

Stambo · Post by **Stambo** » Mon Feb 09, 2015 7:14 am

danhampson wrote:Have you got the oneshot enabled on the kiss esc's?

He has, and using a Naze32 running cleanflight.

Post by **danhampson** » Mon Feb 09, 2015 4:14 pm

How are you finding it mate? I'm planning Kiss 18amp and dys 1806 2300kv (these motors have been tested on 4s) in the near future for the porket racer.
I'm going to run cleanflight as soon as it's built

Lee · Post by **Lee** » Mon Feb 09, 2015 5:00 pm

How do you swap the board from baseflight to Cleanflight.
I got a flip32 board which i managed to link to baseflight using there firmware.
But I can't find how to get it working with cleanflight.
There are tonnes of firmware options but I don't know which to pick.

Post by **danhampson** » Mon Feb 09, 2015 5:48 pm

I'll post a link for you Lee.

Here you go mate you should find all the info you need here: http://cleanflight.com/

Lee · Post by **Lee** » Tue Feb 10, 2015 9:20 am

Thanks Dan. Got it working.

Marius · Post by **Marius** » Tue Feb 10, 2015 11:57 am

Crazy fast flying! I love it

Guess you have to expect some crashes when you're pushing the envelope like that

cml001 · Post by **cml001** » Tue Feb 10, 2015 12:31 pm

Stambo · Post by **Stambo** » Fri Feb 20, 2015 7:09 pm

We had a bit of a play at one of our local beaches recently.
I don't know what we were expecting but after a couple of runs up and down the beach it got a little boring, so we packed up and went somewhere else.

https://www.youtube.com/watch?v=t-JKARDOCdU

RC-Hangout

Stambo's Flight Log

Re: Stambo's Flight Log

Re: Stambo's Flight Log

Re: Stambo's Flight Log

Re: Stambo's Flight Log

Re: Stambo's Flight Log

Re: Stambo's Flight Log

Re: Stambo's Flight Log

Re: Stambo's Flight Log

Re: Stambo's Flight Log

Re: Stambo's Flight Log

Re: Stambo's Flight Log

Re: Stambo's Flight Log

Re: Stambo's Flight Log

Re: Stambo's Flight Log

Re: Stambo's Flight Log

Re: Stambo's Flight Log

Re: Stambo's Flight Log

Re: Stambo's Flight Log

Re: Stambo's Flight Log

Re: Stambo's Flight Log