Motor Temps, I Need A Number Please!
Moderator: Moderators
Motor Temps, I Need A Number Please!
Hi guys.. First off, I have ABSOLUTLY fell in love with this bird(N5C w OS-55HZ-R)! It is now summer time here in the south and its a sticky humid heat. Now I maidened this heli in the winter and since break in have had it tuned well I do believe. Now issues... 160-190 temps... Good power.. Well here we are a few months in... I'm guessing 6 to 9 gallons thru her so far. The last week or two she seems rich.. Like a little power has been lost.. Not much or bad, but I can tell a difference depending on the time of day... ie outside temperature... So I leaned the high needle 2 clicks... Punch out was stronger.. Mid stick at the top of punch gave the same smoke.. No excessive cloud.. Travel thru mid seems good so I left the mid needle as it was. Having done this she was good.. BUT... My engine temp now averages 205-225... Is this too hot? What average temp should I expect in the summer with heat in the 90s? What's too hot? What temp should I set my alarm to? Thanks in advance!
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Pulse Battery
Castle Creations
Morgan Fuel
Re: Motor Temps, I Need A Number Please!
Lean'd her out 2 clicks on the high needle & 1 click on the mid needle.. Then gave her a bath... Test hover & flight... She's better.. How strange is that! I would have thought lean'n out would raise the temp... Back in the game!
- Attachments
-
- image.jpg (1.24 MiB) Viewed 1726 times
-
- image.jpg (1.72 MiB) Viewed 1726 times
-
- image.jpg (1.49 MiB) Viewed 1726 times
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Pulse Battery
Castle Creations
Morgan Fuel
- danhampson
- Site Admin
- Posts: 1746
- Joined: Thu Nov 06, 2014 2:54 pm
- Location: Manchester, United Kingdom
- Contact:
Re: Motor Temps, I Need A Number Please!
Glad you got it worked out mate, sorry I couldn't be any help I have no experience with nitro at all.
FPV addict.
Re: Motor Temps, I Need A Number Please!
That is one good looking nitro bird you got there cml001.
HK 500 DFC
Gaui X3L
Tarot 450DFC scale/Coastguard
Fossil 180
Fossil 210
Citizen member #00748
Gaui X3L
Tarot 450DFC scale/Coastguard
Fossil 180
Fossil 210
Citizen member #00748
Re: Motor Temps, I Need A Number Please!
Thank u! She is my baby! My sexy baby!... What.. No hun I was talk'n bout u... No no.. I didn't just say that about my helicopter... Couch... Why?.. I meant u... Not the couch! Really? Lol
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Pulse Battery
Castle Creations
Morgan Fuel
Re: Motor Temps, I Need A Number Please!
Squirrel!
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Pulse Battery
Castle Creations
Morgan Fuel
- CrazyCooter75
- Member
- Posts: 122
- Joined: Tue Dec 02, 2014 3:52 pm
- Location: Spring Branch, Texas
Re: Motor Temps, I Need A Number Please!
That is one sweet looking bird Clay! Does she get more attention that the 550? I know mine does! My gasser has really helped my learning progress across the board.
Tarot 450 FBL (Robird, YEP45, Hobbymate 2000KV)
Align 500 Pro DFC (Robird, YEP80, Turnigy SK3 1600KV)
Align 550E Pro DFC (Robird, YEP 120LV, 730MX)
Align 700E Pro DFC (GPro, YEP 120HV, 800MX)
Align 700G DFC (Brain, OS GT15HZ)
BAH Nemesis 240 Mini Quad
Align 500 Pro DFC (Robird, YEP80, Turnigy SK3 1600KV)
Align 550E Pro DFC (Robird, YEP 120LV, 730MX)
Align 700E Pro DFC (GPro, YEP 120HV, 800MX)
Align 700G DFC (Brain, OS GT15HZ)
BAH Nemesis 240 Mini Quad
Re: Motor Temps, I Need A Number Please!
Up till this week yeah.. I have been enjoy'n her more lately.. Since I put her together really... But the passed couple sessions iv been on the 550... Outta fuel till payday.. Glad too cause I found a little nitch with 550... Love'm all!
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Pulse Battery
Castle Creations
Morgan Fuel
Re: Motor Temps, I Need A Number Please!
Your tune will change with ambient temps. Winter/summer and altitude will change your tune. Good luck with the bird. I would really love to have a nitro, just not in the cards right now.
Matthias "URI X3" Urankar | Citizen 00742
Kit: Gaui X3
Servos: BK BL 3001 HV, BL 5005 HV
Motor: Scorpion HK 2520-3500 Kv
TX/RX: Specktrum DX6, VControl
Charger: PowerLabs PL6
Batteries: Pulse Ultra 2250, 35C
Kit: Gaui X3
Servos: BK BL 3001 HV, BL 5005 HV
Motor: Scorpion HK 2520-3500 Kv
TX/RX: Specktrum DX6, VControl
Charger: PowerLabs PL6
Batteries: Pulse Ultra 2250, 35C
Re: Motor Temps, I Need A Number Please!
Yeah.. Takes about a year to get it all together myself... For both my big birds.. Ain't cheap.. But.. I buy a servo here & one there.. Do the "layaway" plan at my LHS for stuff he carries like ESCs & engines... Toss'm in a drawer till I get it all together at a point I can start a build... That's how I do it... Got a 700 in the works now.. Gonna be a long while till I'm close tho.
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Pulse Battery
Castle Creations
Morgan Fuel
Re: Motor Temps, I Need A Number Please!
How's that gasser doin.. The videos u posted where good. Haven't heard more from u about her.. What r ur flight times? How's the power compair to nitro? Does it bog?... Gotta be easier on ur wallet... $30 a gallon for nitro didn't seem bad at first.. But I can put a gallon thru her in one trip to the field... Haven't really gauged it, uh.. Guess 8-10 flights per gallon.. I'll have to measure this on the next purchase of fuel.. I'm out at the moment.. Gonna re-up Thursday.. Decided to start buy'n by the case to save a little cash.CrazyCooter75 wrote:That is one sweet looking bird Clay! Does she get more attention that the 550? I know mine does! My gasser has really helped my learning progress across the board.
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Pulse Battery
Castle Creations
Morgan Fuel