Derek's New FPV Viewing Monitor
Moderator: Moderators
Re: Derek's New FPV Viewing Monitor
Actually that makes sense to me, Tony lol. I'll try that when I get my replacement.
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Re: Derek's New FPV Viewing Monitor
Based on the power adapter labeling you do need center to be positive. Definitely put the meter on the new one you made up and make sure. Easy to get those coaxial plug end leads mixed up. What battery did you use to power this?
Paul Volcko
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
Re: Derek's New FPV Viewing Monitor
Actually, thecable that I used has two individually insulated wires, side by said.
As I said above, when I was making the adapter, before I added any power to anything, I broke open the wall plug and followed the wires directly to the circuit board. I found the + and the - and the made the connection accordingly.
This all being said, when I get the new one, I will still check the multimeter to the round plug for proper polarity.
As I said above, when I was making the adapter, before I added any power to anything, I broke open the wall plug and followed the wires directly to the circuit board. I found the + and the - and the made the connection accordingly.
This all being said, when I get the new one, I will still check the multimeter to the round plug for proper polarity.
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Re: Derek's New FPV Viewing Monitor
I forgot to answer one of Paul's questions...the battery that I used was a 75% charged 3S 2200mah 45C
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Re: Derek's New FPV Viewing Monitor
Have you tried that battery on your quad?Derek wrote:I forgot to answer one of Paul's questions...the battery that I used was a 75% charged 3S 2200mah 45C
Might be a bit heavy but has plenty of current capability.

RCX 250 Minquad FPV addiction
500 X quad FPV/AP platform
450 X quad set up for night flight
Multiple WLToys V911, V949, V959
Taranis, Turnigy 9X
Fatshark Predator, Immersion 5800 Duo
Trex 500 Esky Belt CP V2
500 X quad FPV/AP platform
450 X quad set up for night flight
Multiple WLToys V911, V949, V959
Taranis, Turnigy 9X
Fatshark Predator, Immersion 5800 Duo
Trex 500 Esky Belt CP V2
Re: Derek's New FPV Viewing Monitor
The battery on th quad is also a 3S pack.
The output should be the same
The output should be the same
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Re: Derek's New FPV Viewing Monitor
The current capacity is increased to 99 amps.
2200x45/1000=99
1550x30/1000=45
It's almost double.
When you hit low voltage alarm on punch outs it is because the battery cannot supply the current the motors are asking for so the voltage sags.
2200x45/1000=99
1550x30/1000=45
It's almost double.
When you hit low voltage alarm on punch outs it is because the battery cannot supply the current the motors are asking for so the voltage sags.
RCX 250 Minquad FPV addiction
500 X quad FPV/AP platform
450 X quad set up for night flight
Multiple WLToys V911, V949, V959
Taranis, Turnigy 9X
Fatshark Predator, Immersion 5800 Duo
Trex 500 Esky Belt CP V2
500 X quad FPV/AP platform
450 X quad set up for night flight
Multiple WLToys V911, V949, V959
Taranis, Turnigy 9X
Fatshark Predator, Immersion 5800 Duo
Trex 500 Esky Belt CP V2
Re: Derek's New FPV Viewing Monitor
I think your on the wrong thread, Stambo lol. But you are right about the amps for flying.
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Re: Derek's New FPV Viewing Monitor
Sorry Stambo! I was at work last night when I read your post. It was quite hot in the plant and I was very tired. I misunderstood what you were saying. You were asking me if I had tried that 3S 2200 45C lipo on my quad. The answer is yes, I have and it but I don't remember if it set off the LVM. I was trying to avoid using that pack because of it's size but...since the quad is already NOT what I had hoped for, I may just continue to use the 3S 2200mah 45C on my 290 quad. I'll have to order some more because I only have one of those. One just isn't gonna be good enough, lol.Stambo wrote:Have you tried that battery on your quad?Derek wrote:I forgot to answer one of Paul's questions...the battery that I used was a 75% charged 3S 2200mah 45C
Might be a bit heavy but has plenty of current capability.
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Re: Derek's New FPV Viewing Monitor
You can't just have ONE lipo for anything Derek... Lol, too much fun to have to stop after 5 mins...
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
Re: Derek's New FPV Viewing Monitor
I had 3. One of them has come up missing and the other one died a horrible death. I just haven't ordered batteries in a long while, lol.Tony wrote:You can't just have ONE lipo for anything Derek... Lol, too much fun to have to stop after 5 mins...
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Re: Derek's New FPV Viewing Monitor
Me neither D, I'd like some lighter 3s lipos, got one 1500 and quad is much more agile with that
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
Re: Derek's New FPV Viewing Monitor
No worries Derek, I kind of figured you would get it in the end. 

RCX 250 Minquad FPV addiction
500 X quad FPV/AP platform
450 X quad set up for night flight
Multiple WLToys V911, V949, V959
Taranis, Turnigy 9X
Fatshark Predator, Immersion 5800 Duo
Trex 500 Esky Belt CP V2
500 X quad FPV/AP platform
450 X quad set up for night flight
Multiple WLToys V911, V949, V959
Taranis, Turnigy 9X
Fatshark Predator, Immersion 5800 Duo
Trex 500 Esky Belt CP V2
Re: Derek's New FPV Viewing Monitor
Ok, now I'm excited!!! The store finally had a replacement 19" tv come in stock. They called me. I hurried down and got mine replaced with no questions asked. PERFECT!!! I brought the tv home and just did a bit of testing. Plugged the cord into the wall and then to the tv. Pressed the power button and the tv comes on, as it should. Cool! I got my quad and FPV stuff...hooked it all up and after some brief setup, I could see my daughters face on the tv because the camera on my quad was pointing at my daughter, lol. AWESOME!!!
I'll need to get another a/v cable and I'll need different cable that converts the a/v cable to whatever connector that goes to the vrx. Besides that, it's perfect!!!
If you guys would like to see a how it's setup, just ask. I'll do up a bit of video that shows the tv working.
I'll need to get another a/v cable and I'll need different cable that converts the a/v cable to whatever connector that goes to the vrx. Besides that, it's perfect!!!
If you guys would like to see a how it's setup, just ask. I'll do up a bit of video that shows the tv working.
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
- Graham Lawrie
- Moderator
- Posts: 5049
- Joined: Thu Nov 06, 2014 7:14 pm
- Location: Kinlochleven, Scotland
- Contact:
Re: Derek's New FPV Viewing Monitor
Cool Derek do that 

Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius
CITIZEN # 521
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius
CITIZEN # 521
Re: Derek's New FPV Viewing Monitor
Ok...I've gotta work the next few nights but I'll hook it all up over the weekend and show ya.Graham Lawrie wrote:Cool Derek do that
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Re: Derek's New FPV Viewing Monitor
Good deal Derek. Is it just me or is ppl talking on the other forum more again
Re: Derek's New FPV Viewing Monitor
I dunno about the other forum. I don't go there
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Re: Derek's New FPV Viewing Monitor
Was wondering seems chat on here died off
Re: Derek's New FPV Viewing Monitor
Well, people get busy. I, myself, have been working a lot. Many days off have been rained out or I'm playing with my lil girl.wolfman76 wrote:Was wondering seems chat on here died off
Anyway...I'll get some video of my 19" fpv TV all setup and working. Its pretty cool!!!
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744