SunnySky or T Motor

Props, prop adapters, spinners, prop blade hubs, etc. and the motors that drive them

Moderator: Moderators

Post Reply
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

SunnySky or T Motor

Post by Derek »

I've read the reviews and seen some videos of both the SunnySky 2300kv motors and the T Motor 2300 motors. Both are similar in size. Both are 2-3S. Both pull about the same amps, less than 10. Both are about $25 each. To my uneducated eyes and uneducated experience with multi rotors, these really seem to be a "toss up". Does anyone have any tips towards motors that may help me decide?
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
User avatar
danhampson
Site Admin
Site Admin
Posts: 1746
Joined: Thu Nov 06, 2014 2:54 pm
Location: Manchester, United Kingdom
Contact:

Re: SunnySky or T Motor

Post by danhampson »

I'm having the same dilemma Derek, just to throw another spanner in the works, have you had a look at cobra motors.
I'm closely watching some 4, 5 and 6s mini quad testing going on at the moment and these are the 3 brands of motor that are holding up best under extreme usage. One of the testers is saying tiger all the way just because the build quality is better, he has used 2204's, 2206's and 2208's.
I am personally looking at 4s systems
FPV addict.
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: SunnySky or T Motor

Post by Derek »

Great! Another brand to look at!!! That's all I need, lmao.

lol, no, i haven't looked at Cobra motors but since you've mentioned it, I'll have a look at price and specs. I'm looking for a setup that I can run on 3S but also be very much 4S capable. If you find any "good word" on any of those motors, please be sure to share. I should be ready to order the motors and esc's for my quad late next month.
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
User avatar
danhampson
Site Admin
Site Admin
Posts: 1746
Joined: Thu Nov 06, 2014 2:54 pm
Location: Manchester, United Kingdom
Contact:

Re: SunnySky or T Motor

Post by danhampson »

I will do. The most success running 4s+ is with the t-motor's. Here's a video from one of the guys testing. This is a 5s setup. Have a look through his channel Derek he has used lots of different motor prop and battery combinations. Mainly with t-motors.
FPV addict.
User avatar
danhampson
Site Admin
Site Admin
Posts: 1746
Joined: Thu Nov 06, 2014 2:54 pm
Location: Manchester, United Kingdom
Contact:

Re: SunnySky or T Motor

Post by danhampson »

Video didn't add???
MB Epic 280 5s (Green Love): http://youtu.be/8t87LBNFAu4
FPV addict.
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: SunnySky or T Motor

Post by Derek »

Oh WOW! I just watched that video! That was insanely awesome! He's got a serious powerhouse in that setup!!!
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
User avatar
danhampson
Site Admin
Site Admin
Posts: 1746
Joined: Thu Nov 06, 2014 2:54 pm
Location: Manchester, United Kingdom
Contact:

Re: SunnySky or T Motor

Post by danhampson »

He personally thinks that 6s is too much, very hard to get the gains right.
He has done a video with some kiss esc/ccleanflight tuning tips too.
FPV addict.
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: SunnySky or T Motor

Post by Derek »

A 6S mini quad??? WOW!!! That would be a "mad machine" to say the least, lol.
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: SunnySky or T Motor

Post by Derek »

I've seen that there are Tmotor 1804 2400kv motors and 1806 2300kv motors. Whats the difference between the two?
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
User avatar
KevG
Supporter
Supporter
Posts: 1642
Joined: Fri Nov 07, 2014 4:59 pm
Location: South Wales, UK

Re: SunnySky or T Motor

Post by KevG »

Lol Derek this is exactly why I went for a kit, take the uncertainty and decision making away from me, it was so much easier,

My mate had his on the sunny sky's last week and they were nice, punchy and on full chat were pulling 18a or average of 4.5a per motor,
Minor league Aviator, against gravity which normally wins!

RotoriousFPV quads Micro Rad 3" Gat 4" and Rad 5"
D-Quad Obsession
Yuneec Typhoon H
Taranis Qx7,
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: SunnySky or T Motor

Post by Tony »

Never mind the motors Man, that video is totally awesome, that guy is mint, one day I'll be like that.... :lol: :lol: :D :D
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
User avatar
danhampson
Site Admin
Site Admin
Posts: 1746
Joined: Thu Nov 06, 2014 2:54 pm
Location: Manchester, United Kingdom
Contact:

Re: SunnySky or T Motor

Post by danhampson »

The difference is the height of the motor and stator the 1806 should have more torque than 1804
FPV addict.
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: SunnySky or T Motor

Post by Derek »

hmmm, i think a bit of extra torque could be handy. Thanks Dan!
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
User avatar
Stambo
Member
Member
Posts: 1349
Joined: Thu Nov 20, 2014 7:13 pm
Location: Whangarei New Zealand

Re: SunnySky or T Motor

Post by Stambo »

Lol, 2206 is better still. :)
RCX 250 Minquad FPV addiction
500 X quad FPV/AP platform
450 X quad set up for night flight
Multiple WLToys V911, V949, V959
Taranis, Turnigy 9X
Fatshark Predator, Immersion 5800 Duo
Trex 500 Esky Belt CP V2
User avatar
pvolcko
Site Admin
Site Admin
Posts: 2197
Joined: Thu Nov 06, 2014 3:18 pm
Location: Syracuse, NY
Contact:

Re: SunnySky or T Motor

Post by pvolcko »

Can't say a preference between the two brands or specific models you have listed. I went with four sunsky's for my QAV500.
Paul Volcko
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: SunnySky or T Motor

Post by Derek »

Well, first off...it's good to see you around again, Paul. It's been a while since I've seen you post something.

As for the motors, I went with a set of sunny sky motors. They got good reviews and didn't cost much. Hopefully I can get some soldering done this week.
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
User avatar
pvolcko
Site Admin
Site Admin
Posts: 2197
Joined: Thu Nov 06, 2014 3:18 pm
Location: Syracuse, NY
Contact:

Re: SunnySky or T Motor

Post by pvolcko »

Yeah. Sorry about that. It got busy for me for the last month. I haven't been on this forum, or any forum, much at all. Hopefully with the weather starting to break into spring I won't be putting to much time in outside keeping the driveway clear. :) Have a new plane and heli to build before spring weather hits and also have the gob 500 to repair. I still have the QAV500 on the bench too (over a year now I think), but that is another story.

Hope to be putting in some more time around here and get a build thread or two going.
Paul Volcko
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
Post Reply

Return to “Propellers and Motors”