Derek's Hobbyzone Delta Ray

You fly it, you document it. Tell us the story of the day. As always, video is better!

Moderator: Moderators

Forum rules
Members are encouraged to keep either a single thread for all their flying activities or post a thread per aircraft. If you want to make a one-off thread about a particular flight/event go ahead, but please put a link to that thread in your normal flight thread and vice versa.
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Derek's Hobbyzone Delta Ray

Post by Derek »

My Dad came to me a few months ago and asked that I teach him how to fly. He wanted to scratch build a plane that had a bomb dropper, on board, and he wants to fly with me. Fantastic!!! I've had him on the sim and he's done very well. I decided to buy the Hobbyzone Delta Ray as a trainer for him because it has the AS3X and SAFE technology. It's an awesome plane. Slow flyer. Very predictable. This was the maiden flight with me on the sticks.

https://www.youtube.com/watch?v=5jOt_9RnIG4
Last edited by Derek on Sat Jun 20, 2015 1:56 pm, edited 1 time in total.
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
User avatar
cml001
Supporter
Supporter
Posts: 2882
Joined: Fri Nov 07, 2014 4:46 pm
Location: Augusta GA

Re: Maiden Flight of the Hobbyzone Delta Ray

Post by cml001 »

How could you?!!! Rob pops of his maiden... Shame on u Derek! Lol
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: Maiden Flight of the Hobbyzone Delta Ray

Post by Derek »

cml001 wrote:How could you?!!! Rob pops of his maiden... Shame on u Derek! Lol
lol
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: Maiden Flight of the Hobbyzone Delta Ray

Post by Tony »

Wow, that looks like a great trainer. Nice and slow..... Yeah did you not give pops the sticks then.... Eeee Derek...... :D
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: Maiden Flight of the Hobbyzone Delta Ray

Post by Derek »

Thanks Tony! Yeah, it's an awesome and slow flying plane. It's quite different than anything else that I fly. My Blue Cub is slow but this Delta Ray is super slow and very very stable with the AS3X. I got the BNF version so I just had to assemble it, refer to the manual for the tx settings, and then charge the battery. Simple as that. I did change the connectors to Deans plugs (my preference).

No, my Dad did not fly that day. I only have the one battery (more have been ordered) and Dad wants to make sure that we have the buddy box set up when he flies for the first few times. We'll get it sorted out and then Dad will be on the sticks. Then...we'll do an unveiling of the plane that we've been scratch building for him.
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
User avatar
DOG
Member
Member
Posts: 1786
Joined: Fri Mar 06, 2015 4:03 am
Location: Inverness Florida

Re: Maiden Flight of the Hobbyzone Delta Ray

Post by DOG »

Hey Derek. Cant wait til you and your dad unveil the mystery plane that's been scratch built. I like that causal talk between you and your dad while landing the Delta Ray right by you guys. Almost looks like you know what you are doing my friend? LOL! Keep the birds flying.
HK 500 DFC
Gaui X3L
Tarot 450DFC scale/Coastguard
Fossil 180
Fossil 210
Citizen member #00748
User avatar
danhampson
Site Admin
Site Admin
Posts: 1746
Joined: Thu Nov 06, 2014 2:54 pm
Location: Manchester, United Kingdom
Contact:

Re: Maiden Flight of the Hobbyzone Delta Ray

Post by danhampson »

looked good Derek. whens your Dads first flight? and the other question, will there be video?
FPV addict.
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: Maiden Flight of the Hobbyzone Delta Ray

Post by Derek »

DOG wrote:Hey Derek. Cant wait til you and your dad unveil the mystery plane that's been scratch built. I like that causal talk between you and your dad while landing the Delta Ray right by you guys. Almost looks like you know what you are doing my friend? LOL! Keep the birds flying.
Thanks DOG! Dad is very happy with the way that his plane is turning out. We've been working on it, from time to time, when I have days off work. We really don't have much more to do before it's completed. I'm hoping to get his plane finished up next week and perhaps a maiden flight next weekend. As for the landing....thanks! This Delta Ray just floats right in, with minimal throttle. It's just awesome!!
danhampson wrote:looked good Derek. whens your Dads first flight? and the other question, will there be video?
Dad's first flight will be when he says that he's ready. He wants to fly on the buddy box. The Delta Ray has 3 flight modes. My DX8 (master tx) has a 3 position flight mode switch. My DX6i (slave tx) only has a 2 position flight mode switch. I'll have to test the two tx's and see which two flight modes the DX6i will have. I'm almost thinking that my DX8 will have "beginner, intermediate, and advanced" and then my DX6i will allow "beginner and intermediate". If that's the case, then we should be in good shape. I will try to get video of Dad's maiden flight. I'll see if my wife will run the video cam for us or perhaps the Mobius cam on my hat.
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: Maiden Flight of the Hobbyzone Delta Ray

Post by Tony »

Well make sure the Mrs videos these flights mind D, :D :D
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: Derek's Hobbyzone Delta Ray

Post by Derek »

Having some fun with the Delta Ray
DSC_0032.JPG
DSC_0032.JPG (31.63 KiB) Viewed 3055 times
DSC_0095.JPG
DSC_0095.JPG (30.34 KiB) Viewed 3055 times
DSC_0097.JPG
DSC_0097.JPG (37.31 KiB) Viewed 3055 times
DSC_0105.JPG
DSC_0105.JPG (39.51 KiB) Viewed 3055 times
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
User avatar
cml001
Supporter
Supporter
Posts: 2882
Joined: Fri Nov 07, 2014 4:46 pm
Location: Augusta GA

Re: Derek's Hobbyzone Delta Ray

Post by cml001 »

:D ;)
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: Derek's Hobbyzone Delta Ray

Post by Tony »

Very nice Derek, don't recall seeing that bird in the past...
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: Derek's Hobbyzone Delta Ray

Post by Derek »

Thanks Tony! I did post the Maiden video a while ago. It went very well. I actually bought this plane for my Dad to learn how to fly with. We haven't gotten him on the sticks yet. The weather has been very unfair, lol. If we can get another day like the other day, I'll get Dad on the buddy box.
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: Derek's Hobbyzone Delta Ray

Post by Tony »

Ahhhh yes, I recall the maiden when you didn't give Dad the sticks...lol
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: Derek's Hobbyzone Delta Ray

Post by Derek »

Tony wrote:Ahhhh yes, I recall the maiden when you didn't give Dad the sticks...lol
lol, he said he wasn't comfortable then. Perhaps next time.
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: Derek's Hobbyzone Delta Ray

Post by Derek »

Today was an awesome day for the Delta Ray. My Dad and I got together for a few flights, including my Delta Ray that I bought as a trainer for my Dad. I took two batteries, figuring one battery for me and one battery for Dad. My flight was smooth and lazy with a pretty cool landing. Now, Dad's turn. I figured that I'd do the take off and then hand my DX8 to Dad and he could fly it around. I'd be right there in the event that something went wrong. I explained to him where the Panic Button was located. Based on the way that Dad was talking, he wanted to take off, fly, and land it. He was a bit apprehensive about the landing but I was there if need be. So...a fresh battery was plugged in. We had plenty of runway. I pointed the plane into the wind and Dad was on the sticks. Dad got the plane into the air with no troubles. I was talking to him and Dad seemed real good and comfortable. I asked him if he'd be ok in the air without my for a moment so that I could go get the camera. He said yes. I went and got the camera and pressed record.

So...we did not get Dad's take off on video but we do have video of him flying the plane, on his own, and he landed it....on his own, lol. It was really cool to see and I'm real happy for him. Dad will get me the video and I'll get it posted. We also have video and pictures of my fpv quad and my Trex 600.

Stay tuned!
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: Derek's Hobbyzone Delta Ray

Post by Derek »

Here's the video of my Dad's first flight and landing with the Hobbyzone Delta Ray. Be sure to check out the smile on his face after he lands the plane.

https://youtu.be/lNWZpKdX_bA
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
west0618
Member
Member
Posts: 115
Joined: Mon Feb 02, 2015 10:40 pm
Location: Fort Wayne, Indiana USA

Re: Derek's Hobbyzone Delta Ray

Post by west0618 »

Not bad for an "old" rookie...if I do say so myself.
User avatar
cml001
Supporter
Supporter
Posts: 2882
Joined: Fri Nov 07, 2014 4:46 pm
Location: Augusta GA

Re: Derek's Hobbyzone Delta Ray

Post by cml001 »

Nice!
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
User avatar
pvolcko
Site Admin
Site Admin
Posts: 2197
Joined: Thu Nov 06, 2014 3:18 pm
Location: Syracuse, NY
Contact:

Re: Derek's Hobbyzone Delta Ray

Post by pvolcko »

Nice last half of a flight. :) Those foamies can be a handful to land in the wind.
Paul Volcko
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
Post Reply

Return to “Member Flight Logs”