Cleanflight Oneshot:)

Graham Lawrie · Post by **Graham Lawrie** » Sat Apr 25, 2015 4:08 pm

How many guys are running Oneshot on Cleanflight? Any pointers or tips?
cheers
G

Post by **danhampson** » Sat Apr 25, 2015 9:13 pm

enable oneshot

cli command
set looptime = 1600

up your roll and pitch p's by 1/3

fly and tune,

Post by **danhampson** » Sat Apr 25, 2015 9:13 pm

DO IT!!!!!!

Lee · Post by **Lee** » Sun Apr 26, 2015 4:03 am

Your ESCs have to be programmed for oneshot first.

Tony · Post by **Tony** » Sun Apr 26, 2015 6:05 am

Just out of interest, what's the difference.

Post by **danhampson** » Sun Apr 26, 2015 7:54 am

Better throttle response for the flight controller making it more stable. In short.

Tony · Post by **Tony** » Sun Apr 26, 2015 7:59 am

danhampson wrote:Better throttle response for the flight controller making it more stable. In short.

Cheers mate

Graham Lawrie · Post by **Graham Lawrie** » Sun Apr 26, 2015 11:48 am

@Lee i flash all my Esc,s with BLHeli:) i am waiting for 2 for the Orca, their appears to be a shortage of them, i have 4 on route to me, which leaves me 2 spares when they arrive.

@Dan, all ready to test today, had a short hover yesterday, still got a yaw issue. Waiting for the rain to stop:(

Graham Lawrie · Post by **Graham Lawrie** » Sun Apr 26, 2015 11:49 am

danhampson wrote:enable oneshot

cli command
set looptime = 1600

up your roll and pitch p's by 1/3

fly and tune,

I have looptime at 1500? is that ok?

cml001 · Post by **cml001** » Sun Apr 26, 2015 11:49 am

What is the difference between a quick Simon K ESC & a Oneshoot? Which is better?

Graham Lawrie · Post by **Graham Lawrie** » Sun Apr 26, 2015 11:51 am

One shot cuts out the delay in the programme. It is as Dan said better, quicker and more responsive. Better all round. Cleanflight/BLHeli/Oneshotis what you should run:)

Graham Lawrie · Post by **Graham Lawrie** » Sun Apr 26, 2015 11:52 am

https://www.youtube.com/watch?v=7oX5kX1eBWw

This explains it better for me:)

cml001 · Post by **cml001** » Sun Apr 26, 2015 11:53 am

When setting up my quad in Groundstation it asked which ESC I was using.. Standard, Fast, or Oneshot.. I clicked Fast.. Didn't know what a Oneshot was.. Lol

Tony · Post by **Tony** » Tue Apr 28, 2015 3:54 pm

hes got a similar scope to me....mine is a bit faster.... great devices....

cml001 · Post by **cml001** » Tue Apr 28, 2015 4:27 pm

Post by **danhampson** » Tue Apr 28, 2015 5:21 pm

cml001 wrote:When setting up my quad in Groundstation it asked which ESC I was using.. Standard, Fast, or Oneshot.. I clicked Fast.. Didn't know what a Oneshot was.. Lol

Fast is perfect for your setup Clay.

Derek · Post by **Derek** » Tue Apr 28, 2015 7:22 pm

What are you guys using to flash your esc's with BLHeli?

Post by **danhampson** » Tue Apr 28, 2015 7:48 pm

Have a look at this thread Derek
http://rc-hangout.com/forum/viewtopic.php?f=93&t=774

Derek · Post by **Derek** » Tue Apr 28, 2015 9:38 pm

danhampson wrote:Have a look at this thread Derek
http://rc-hangout.com/forum/viewtopic.php?f=93&t=774

That was helpful, Dan! Thanks! I may have to order some Afro esc's and give it a rip

Stambo · Post by **Stambo** » Tue Apr 28, 2015 10:01 pm

I have seen good and bad things about them but I have just ordered some Kiss 18a ESCs.
I think they were one of the first to run oneshot.
If I have to I will flash them but they are the v2 so hopefully any problems have been sorted.

RC-Hangout

Cleanflight Oneshot:)

Cleanflight Oneshot:)

Re: Cleabflight Oneshot:)

Re: Cleabflight Oneshot:)

Re: Cleabflight Oneshot:)

Re: Cleabflight Oneshot:)

Re: Cleabflight Oneshot:)

Re: Cleabflight Oneshot:)

Re: Cleanflight Oneshot:)

Re: Cleanflight Oneshot:)

Re: Cleanflight Oneshot:)

Re: Cleanflight Oneshot:)

Re: Cleanflight Oneshot:)

Re: Cleanflight Oneshot:)

Re: Cleanflight Oneshot:)

Re: Cleanflight Oneshot:)

Re: Cleanflight Oneshot:)

Re: Cleanflight Oneshot:)

Re: Cleanflight Oneshot:)

Re: Cleanflight Oneshot:)

Re: Cleanflight Oneshot:)