HJ MWC X-Mode Alien build

Got a new project going on? Document your builds of aircraft here. Video and pictures highly encouraged!

Moderator: Moderators

Forum rules
Please post one thread per aircraft or project. If you're doing a rebuild or major make over of an existing aircraft you can start a new thread, but you are encouraged to cross link the new thread and original build thread so people can easily see the history of your aircraft.
Post Reply
User avatar
KevG
Supporter
Supporter
Posts: 1642
Joined: Fri Nov 07, 2014 4:59 pm
Location: South Wales, UK

HJ MWC X-Mode Alien build

Post by KevG »

Well you have been waiting and here it starts,

Basically this is a tbs clone, g10 pieces and copy dji arms which seem pretty well formed and rigid, costs a mighty £11 or $16 ish

The box contents are 4 arms and upper and lower decks and an anti vibe mount as well as screws and 4 bobbins and 4 standoffs
20150429_121618.jpg
20150429_121618.jpg (4.72 MiB) Viewed 3186 times
First was to mount the motors and esc's
20150429_122330.jpg
20150429_122330.jpg (4.14 MiB) Viewed 3186 times
20150429_122338.jpg
20150429_122338.jpg (4.5 MiB) Viewed 3186 times
Then I attached the arms to the lower plate, and temp added the top plate for strength while I take it home.
20150429_134147.jpg
20150429_134147.jpg (1.6 MiB) Viewed 3180 times
Last edited by KevG on Wed Apr 29, 2015 12:46 pm, edited 1 time in total.
Minor league Aviator, against gravity which normally wins!

RotoriousFPV quads Micro Rad 3" Gat 4" and Rad 5"
D-Quad Obsession
Yuneec Typhoon H
Taranis Qx7,
Top
User avatar
DamhDearg
Member
Member
Posts: 256
Joined: Sat Nov 08, 2014 10:21 am
Location: Kinlochleven, Scotland

Re: HJ MWC X-Mode Alien build

Post by DamhDearg »

Nice
Cameron
Token Trex 600 N, os 55,MSH Brain
Goblin 700 Comp, MSH Brain, BK servos, Scorpion 4035 560, Edge 160
Goblin 380, MSH Brain, BK servos, Scorpion 3014 900, Edge 75
Crack Turbo Beaver :?

Bert Kammerer Fanboy
Citizen #244
Top
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: HJ MWC X-Mode Alien build

Post by Tony »

bloody awesome man.... it looks HUGE, is it finished yet???? lmao
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
Top
User avatar
KevG
Supporter
Supporter
Posts: 1642
Joined: Fri Nov 07, 2014 4:59 pm
Location: South Wales, UK

Re: HJ MWC X-Mode Alien build

Post by KevG »

Yeah fella it's big, hopefully finish by the weekend.
Minor league Aviator, against gravity which normally wins!

RotoriousFPV quads Micro Rad 3" Gat 4" and Rad 5"
D-Quad Obsession
Yuneec Typhoon H
Taranis Qx7,
Top
User avatar
cml001
Supporter
Supporter
Posts: 2882
Joined: Fri Nov 07, 2014 4:46 pm
Location: Augusta GA

Re: HJ MWC X-Mode Alien build

Post by cml001 »

450..500?
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Top
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: HJ MWC X-Mode Alien build

Post by Derek »

Looks cool, Kev! Nice buy!!!
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
Top
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: HJ MWC X-Mode Alien build

Post by Tony »

what you putting on it.... is it going to be used for aerial photography and stuff? maybe slow, long distance fpv'ng
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
Top
User avatar
danhampson
Site Admin
Site Admin
Posts: 1746
Joined: Thu Nov 06, 2014 2:54 pm
Location: Manchester, United Kingdom
Contact:
Contact danhampson

Re: HJ MWC X-Mode Alien build

Post by danhampson »

looks good kev.
FPV addict.
Top
User avatar
Stambo
Member
Member
Posts: 1349
Joined: Thu Nov 20, 2014 7:13 pm
Location: Whangarei New Zealand

Re: HJ MWC X-Mode Alien build

Post by Stambo »

I have one of these that was meant to be my aerial video platform.
It is temporarily grounded as I stole the Naze32 off it for my woody.
Motor and prop balance has to be perfect as those arms seem to amplify any vibrations.
That is why Timecop (the maker of naze32) does not like them.
I have yet to get jello free video from mine, even with Sunnysky motors and well balanced CF props. (obviously not well balanced enough)
I have given up for now, my mini gives better video. :)
Tony wrote:what you putting on it.... is it going to be used for aerial photography and stuff? maybe slow, long distance fpv'ng
Big does not mean slow Tony, I have had mine up to 82 kmh (not intentionally) recorded with OSD and GPS while flying FPV as a beginner.
It was under propped at 9" so with the 10" it has now, it should do a bit more. :)
Scared the stuffin out of me but what a rush. :)
RCX 250 Minquad FPV addiction
500 X quad FPV/AP platform
450 X quad set up for night flight
Multiple WLToys V911, V949, V959
Taranis, Turnigy 9X
Fatshark Predator, Immersion 5800 Duo
Trex 500 Esky Belt CP V2
Top
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: HJ MWC X-Mode Alien build

Post by Tony »

well i was thinking an aerial video vehicle more than a racer or high speed quad with it being that size.... get it built then mate... OSD and GPS eh.... sounds like its going to be a mint project.... keep the pics coming, this is going to be worth watching the progress of...i wanted OSD and GPS on this quad but its too small. ive got the OSD board here all programmed ready to fit.
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
Top
User avatar
KevG
Supporter
Supporter
Posts: 1642
Joined: Fri Nov 07, 2014 4:59 pm
Location: South Wales, UK

Re: HJ MWC X-Mode Alien build

Post by KevG »

To much hassle to osd the cc3d and very limited screen info, so don't think I will try to get it flying on the cc3d

Will be ordering the Naza lite for this after the weekend, but yes I want a slower speed cruiser out of it, then might get the iosd dji unit,

It's a 500 machine I believe,
Minor league Aviator, against gravity which normally wins!

RotoriousFPV quads Micro Rad 3" Gat 4" and Rad 5"
D-Quad Obsession
Yuneec Typhoon H
Taranis Qx7,
Top
User avatar
Stambo
Member
Member
Posts: 1349
Joined: Thu Nov 20, 2014 7:13 pm
Location: Whangarei New Zealand

Re: HJ MWC X-Mode Alien build

Post by Stambo »

You don't need to hook anything to the FC, just between the camera and VTX.
I have this http://www.hobbyking.com/hobbyking/stor ... odule.html, really basic but gives speed, altitude, batt pack voltage, return home indicator etc.
RCX 250 Minquad FPV addiction
500 X quad FPV/AP platform
450 X quad set up for night flight
Multiple WLToys V911, V949, V959
Taranis, Turnigy 9X
Fatshark Predator, Immersion 5800 Duo
Trex 500 Esky Belt CP V2
Top
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: HJ MWC X-Mode Alien build

Post by Derek »

Stambo wrote:You don't need to hook anything to the FC, just between the camera and VTX.
I have this http://www.hobbyking.com/hobbyking/stor ... odule.html, really basic but gives speed, altitude, batt pack voltage, return home indicator etc.
Looks like a pretty cool little item, Stambo! On a mini, speed, altitude, voltage, and home indicator could be pretty handy!
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
Top
User avatar
Stambo
Member
Member
Posts: 1349
Joined: Thu Nov 20, 2014 7:13 pm
Location: Whangarei New Zealand

Re: HJ MWC X-Mode Alien build

Post by Stambo »

On a mini Derek I feel they would be too much of a distraction.
Not to mention the extra wiring and weight.
I am happy with just having the pack voltage sent back to the Taranis and spoken to me every so often.
Although it may be tempting to fit it to the woody just to see how fast it can go. :)
RCX 250 Minquad FPV addiction
500 X quad FPV/AP platform
450 X quad set up for night flight
Multiple WLToys V911, V949, V959
Taranis, Turnigy 9X
Fatshark Predator, Immersion 5800 Duo
Trex 500 Esky Belt CP V2
Top
User avatar
KevG
Supporter
Supporter
Posts: 1642
Joined: Fri Nov 07, 2014 4:59 pm
Location: South Wales, UK

Re: HJ MWC X-Mode Alien build

Post by KevG »

Nice info Stambo, thanks mate

Just ordered the Naza fc as I want a very easy stable ship I can flick a switch and have a breather with,

Done a bot more of the build last night but hit a snag with the frame spacers, one had no threads in one end, :-(

Ordered a set of tbs spacers with the Naza unit and had a refund of 50% on the frame kit which I'm reasonably happy about, as the tbs posts give me extra strengthening for the main frame area as well.

My wire should turn up today for my power harness,
Minor league Aviator, against gravity which normally wins!

RotoriousFPV quads Micro Rad 3" Gat 4" and Rad 5"
D-Quad Obsession
Yuneec Typhoon H
Taranis Qx7,
Top
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: HJ MWC X-Mode Alien build

Post by Tony »

Nice to hear your progressing Kev
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
Top
User avatar
KevG
Supporter
Supporter
Posts: 1642
Joined: Fri Nov 07, 2014 4:59 pm
Location: South Wales, UK

Re: HJ MWC X-Mode Alien build

Post by KevG »

Yes it's progressing pretty well, some minor Chinese snags but hey ho.

It's only to get me into the big platforms then her indoors won't see the swaps and changes, lol
Minor league Aviator, against gravity which normally wins!

RotoriousFPV quads Micro Rad 3" Gat 4" and Rad 5"
D-Quad Obsession
Yuneec Typhoon H
Taranis Qx7,
Top
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: HJ MWC X-Mode Alien build

Post by Tony »

I think I'd like to get into the bigger quads too and some time.... So I'll be following this build of yours Kev, keep the pics coming mate
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
Top
User avatar
DamhDearg
Member
Member
Posts: 256
Joined: Sat Nov 08, 2014 10:21 am
Location: Kinlochleven, Scotland

Re: HJ MWC X-Mode Alien build

Post by DamhDearg »

KevG wrote:It's only to get me into the big platforms then her indoors won't see the swaps and changes, lol
Genius Kev! lmao
Cameron
Token Trex 600 N, os 55,MSH Brain
Goblin 700 Comp, MSH Brain, BK servos, Scorpion 4035 560, Edge 160
Goblin 380, MSH Brain, BK servos, Scorpion 3014 900, Edge 75
Crack Turbo Beaver :?

Bert Kammerer Fanboy
Citizen #244
Top
User avatar
Graham Lawrie
Moderator
Moderator
Posts: 5049
Joined: Thu Nov 06, 2014 7:14 pm
Location: Kinlochleven, Scotland
Contact:
Contact Graham Lawrie

Re: HJ MWC X-Mode Alien build

Post by Graham Lawrie »

Nice one Kev:)
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius




CITIZEN # 521
Top
Post Reply

Return to “Member Builds”