my 450 update

[cml001]

Just make sure everything is smooth and the mess is good.. Look to make sure the teeth are seated correctly & the gears match one another.. Good luck bruh!

[concept30]

Thanks Clay, heres my thro cur 0.0% 2 45.0% 3 74.5% 4 80.0% h 100% Pitch cur 0.0% 2 45.0% 3 60.0% 4 75.0% 5 100%
it works good for me, might not look good to yall but it works

[cml001]

Hey.. Fly'n is fly'n! I don't judge.. Have fun!

[Lee]

You may want to try some different Throttle and Pitch curves to make the heli feel and fly smoother Dustin.

Throttle you want a smooth constant top end, so 0,45,75,75,75
Pitch if 0% is full negative, then you don't need that for anything but inverted punchouts.
I suggest approx: 46%(-3º),48%(-1º),50%(0º),75%(5º),100%(10º)

May not be to your liking, but it should give you a very smooth feel.

[cml001]

Agreed.. If ur up to try it.... Pretty close to how I started.. It does make for smooth stick inputs... Yeah.. What Lee said!

[concept30]

I setup my radio to those settings Lee, see I do listen, but its been raining here so I dont have a dry day to fly, but i will when i get the chance, Thanks Lee

[concept30]

i need some more help, Should I buy the new DX6 or should i buy the DX8????

[Derek]

The DX6 is a nice tx. My flying buddy has one and he likes it very much. As for the DX8, unless you buy a used one, the DX8 has been discontinued. If you want more than 6 channels, you are probably looking to get the DX9.

[concept30]

I went to fly my blade 450 the motor cuts out at low stick

[cml001]

Calibrate the ESC?

[concept30]

I don't think I know how to do that clay

[cml001]

Could be the transmitter settings to.... Hard to say... At work now... I'll think on it.

[Derek]

To calibrate your esc....take the main and tail blades off the helicopter

With the tx off, raise your throttle stick to "full stick"

Plug the battery into your esc, then turn on your tx, you will hear a few short beeps

Once you hear the beeps, lower your throttle stick to "low stick"

You should hear a few more beeps and then the helicopter should go through it's original initialization.

That will calibrate your esc.

[concept30]

all calibrated, Thanks Derek

[cml001]

What Derek said! lol. Glad u got it!

[concept30]

It's still doing the same thing, I guess I need to do what clay said and check my TX settings, but what do I check for?

[cml001]

Take a pic of the Tx throttle menu.

[concept30]

Do you mean the throttle curv?

[cml001]

Yeah

[concept30]

If you will scroll up Lee posted a curv that is the one I used