Fossils Stuff Gravity 250 V2 - FPV racer

KevG · Post by **KevG** » Thu Jun 25, 2015 1:46 pm

With battery and without Mobius/Runcam it was 535g

Battery listed at 105g
Mobius/Runcam at 40g

Therefore it should be 470g or 430g without camera on it, roughly.......

Climb out Derek is blistering, power to weight is fantastic!

Derek · Post by **Derek** » Thu Jun 25, 2015 3:28 pm

That's awesome, Kev! I've got my scratch built 290 quad now and it flies very well but I have extra motors, esc's, Naze32, breakout cable, rx, and some hardware. I'm really considering building a 230-240 quad and "seriously" focusing on keeping the weight down. My 290 quad is quite heavy but if I can build another quad, and keep the weight down to 450-500g, I'll be seriously happy.

Have fun with the new sexy quad, Kev! It sure does look great!

Post by **danhampson** » Thu Jun 25, 2015 7:54 pm

That's a good weight kev, 4s is defiantly the way to go with minis.
Great maiden flights.

KevG · Post by **KevG** » Sun Jun 28, 2015 2:40 pm

Here you go guys. The weights proper

: 20150628_153146.jpg (4.95 MiB) Viewed 3211 times

: 20150628_153251.jpg (4.74 MiB) Viewed 3211 times

Tony · Post by **Tony** » Sat Jul 04, 2015 6:17 pm

I want a frame like that Kev, send me a link mate, it's so clean looking...

KevG · Post by **KevG** » Sat Jul 04, 2015 9:20 pm

Just go to fossils stuff website mate, they do a 280 frame now as well, and that has more room inside, mine is tight, and that's with esc's smaller than a 2 quid coin

Graham Lawrie · Post by **Graham Lawrie** » Sun Jul 05, 2015 5:55 am

It is showing £74 on the site but by the time you add delivery its at £94:(

KevG · Post by **KevG** » Sun Jul 05, 2015 7:00 am

Yeah they show you the non vat price,

Tony · Post by **Tony** » Sun Jul 05, 2015 7:02 am

Yep, they are expensive....might give those a miss for a while...lol

Graham Lawrie · Post by **Graham Lawrie** » Sun Jul 05, 2015 7:38 am

I was tempted at £70 but not £100:(

Tony · Post by **Tony** » Sun Jul 05, 2015 9:27 am

Yeah, that's a bit OTT Graham, I'm sure there is others much cheaper out there...

KevG · Post by **KevG** » Mon Jul 06, 2015 8:01 am

Well after using a second hand board that I had of my mate when I bought all his quad stuff, I found I had a little drift that would change if I had trimmed it and then changed battery, so I got a new board,

soldered it up on the weekend with the bare minimum of pins, and put a 3rd pin in for the sat connector on to 3.3v and also soldered in a set of leads for a buzzer, I missed not having them there and not having an arming tone,

Levelled it out of the quad on my table, so I know its perfect as table set up with SOKO tool,

Used a backup of my setting for ease of setting up the new board, and away to go,

Zero drift and one happy fella now,

Derek · Post by **Derek** » Mon Jul 06, 2015 8:12 am

That sounds cool Kev!!!

KevG · Post by **KevG** » Mon Jul 06, 2015 8:30 am

Thanks Derek,

just wanted more confidence in a hover that the quad is not drifting, as its not easy to see when you got the goggles on.

Now bring on the trees

Graham Lawrie · Post by **Graham Lawrie** » Mon Jul 06, 2015 10:37 am

Nice one Kev:) I wish i could solder boards with confidence:( I think i need to get finer tips for the iron:)

KevG · Post by **KevG** » Mon Jul 06, 2015 10:43 am

a good soldering station is a must, I got this one

http://www.amazon.co.uk/Sivitec-Tempera ... ng+station

Graham Lawrie · Post by **Graham Lawrie** » Mon Jul 06, 2015 10:49 am

I have this one:)
http://www.rapidonline.com/tools-equipm ... taod2legmq

KevG · Post by **KevG** » Mon Jul 06, 2015 10:51 am

you should have zero trouble with that biatch.

its a beast!

Graham Lawrie · Post by **Graham Lawrie** » Mon Jul 06, 2015 7:17 pm

I only have one tip:( what tip do you use?

KevG · Post by **KevG** » Mon Jul 06, 2015 7:57 pm

I have 4 but for the naze32 board it's easiest with the needle tip type one

RC-Hangout

Fossils Stuff Gravity 250 V2 - FPV racer

Re: Fossils Stuff Gravity 250 V2 - FPV racer

Re: Fossils Stuff Gravity 250 V2 - FPV racer

Re: Fossils Stuff Gravity 250 V2 - FPV racer

Re: Fossils Stuff Gravity 250 V2 - FPV racer

Re: Fossils Stuff Gravity 250 V2 - FPV racer

Re: Fossils Stuff Gravity 250 V2 - FPV racer

Re: Fossils Stuff Gravity 250 V2 - FPV racer

Re: Fossils Stuff Gravity 250 V2 - FPV racer

Re: Fossils Stuff Gravity 250 V2 - FPV racer

Re: Fossils Stuff Gravity 250 V2 - FPV racer

Re: Fossils Stuff Gravity 250 V2 - FPV racer

Re: Fossils Stuff Gravity 250 V2 - FPV racer

Re: Fossils Stuff Gravity 250 V2 - FPV racer

Re: Fossils Stuff Gravity 250 V2 - FPV racer

Re: Fossils Stuff Gravity 250 V2 - FPV racer

Re: Fossils Stuff Gravity 250 V2 - FPV racer

Re: Fossils Stuff Gravity 250 V2 - FPV racer

Re: Fossils Stuff Gravity 250 V2 - FPV racer

Re: Fossils Stuff Gravity 250 V2 - FPV racer

Re: Fossils Stuff Gravity 250 V2 - FPV racer