Derek's Dad's Scratch Built 1/6 Scale Boat

You drive it, you document it. Story of the day's activities. As always, video is better!

Moderator: Moderators

Forum rules
Members are encouraged to start and keep a single thread for all their RC driving exploits. Alternatively you may start a thread per vehicle. If you wish to post a one-off thread about a particular event you can, but please link to it in your normal thread, and vice versa.
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Derek's Dad's Scratch Built 1/6 Scale Boat

Post by Derek »

Here is the maiden voyage of my Dad's scratch built 1/6 scale boat. You'll hear in the video that it's a bit windy and the lil pond is a bit choppy but the boat did real well and only took on minimal water from the bow spray. We were all real happy with the boat's performance.

https://www.youtube.com/watch?v=h_dgzsllJUQ
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
User avatar
cml001
Supporter
Supporter
Posts: 2882
Joined: Fri Nov 07, 2014 4:46 pm
Location: Augusta GA

Re: Derek's Dad's Scratch Built 1/6 Scale Boat

Post by cml001 »

That's Kool!
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: Derek's Dad's Scratch Built 1/6 Scale Boat

Post by Tony »

That's mint D's Dad, nice build.
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
User avatar
Stambo
Member
Member
Posts: 1349
Joined: Thu Nov 20, 2014 7:13 pm
Location: Whangarei New Zealand

Re: Derek's Dad's Scratch Built 1/6 Scale Boat

Post by Stambo »

Looking good.
Wind might make the water a bit rough but at least if it stops it will get to the side eventually. :)
RCX 250 Minquad FPV addiction
500 X quad FPV/AP platform
450 X quad set up for night flight
Multiple WLToys V911, V949, V959
Taranis, Turnigy 9X
Fatshark Predator, Immersion 5800 Duo
Trex 500 Esky Belt CP V2
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: Derek's Dad's Scratch Built 1/6 Scale Boat

Post by Derek »

Thanks guys! Dad is real happy with it. A calmer day will come and I'm sure Dad will be ready again. Although it's not very calm right now, I would almost bet that he's out with his boat right now. He brought his new batteries to me today and I charged them up for him so, like I said...I almost imagine that he's out there right now, lol.
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: Derek's Dad's Scratch Built 1/6 Scale Boat

Post by Tony »

Good on him, hope he is having fun.. :D :D
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
west0618
Member
Member
Posts: 115
Joined: Mon Feb 02, 2015 10:40 pm
Location: Fort Wayne, Indiana USA

Re: Derek's Dad's Scratch Built 1/6 Scale Boat

Post by west0618 »

Sorry to disappoint but...I have yet to make it back to the pond. I did manage to rework the battery holders for the smaller Lipo packs. Another hang up...aside from the weather that is mostly raining day after day after day...is transport when it is just my wife and I going out. Hence, the transport box shown below was just finished today(started yesterday.) It is felt padded with a Velcro strap across the boat.
BoatBox01.jpg
BoatBox01.jpg (75 KiB) Viewed 6764 times
BoatBox02.jpg
BoatBox02.jpg (114.92 KiB) Viewed 6764 times
At least now the boat will be safe getting to the pond and only take one hand to easily carry. I have to go and check out the other pond in this park as it seems to be calmer than the other due to location and hills around it. I have to find out just how muddy we(my wife and I) may get. She may not be amused. Wish us luck. And there seems to always be the duck/goose poop to deal with.

D's dad
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: Derek's Dad's Scratch Built 1/6 Scale Boat

Post by Derek »

Great box, Dad! Looks good!

Yeah, this seemingly non-stop rain/storms has really put a damper on being outside much. When you get a minute, Dad...can you post a list of the components that are in the boat?
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
User avatar
cml001
Supporter
Supporter
Posts: 2882
Joined: Fri Nov 07, 2014 4:46 pm
Location: Augusta GA

Re: Derek's Dad's Scratch Built 1/6 Scale Boat

Post by cml001 »

Awesome job Dad!
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
User avatar
DOG
Member
Member
Posts: 1786
Joined: Fri Mar 06, 2015 4:03 am
Location: Inverness Florida

Re: Derek's Dad's Scratch Built 1/6 Scale Boat

Post by DOG »

Like father like son or more like son like father. :lol: Either way gentlemen enjoy the hobby and the time you spend together. ;)
HK 500 DFC
Gaui X3L
Tarot 450DFC scale/Coastguard
Fossil 180
Fossil 210
Citizen member #00748
User avatar
cml001
Supporter
Supporter
Posts: 2882
Joined: Fri Nov 07, 2014 4:46 pm
Location: Augusta GA

Re: Derek's Dad's Scratch Built 1/6 Scale Boat

Post by cml001 »

What DOG said!
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: Derek's Dad's Scratch Built 1/6 Scale Boat

Post by Tony »

Nice box D's dad... Doesn't rain/water go with boats.... Lol, I wouldn't have thought rain would effect a boat too much... Maybe that barbies hair will get wet, we know what women are like with hair...lol
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
west0618
Member
Member
Posts: 115
Joined: Mon Feb 02, 2015 10:40 pm
Location: Fort Wayne, Indiana USA

Re: Derek's Dad's Scratch Built 1/6 Scale Boat

Post by west0618 »

HEY!!! We had one day in a row without rain. Radio control is NOT my wife's thing at all but she supports my efforts and loves to see Derek and I hang out. But Derek still has to work for a living so my wife and I took off to the park with fresh batteries and my Snapper race boat. Now the batteries are about half the size and weight of the two I borrowed from Derek for the maiden run. Also they were moved from the aft to just in front of the pilot(one on the outside of each of her legs actually). This is where the low voltage alarm is also. I set the duel rates back to 50% on the throttle for this run and only hooked up one of the two batteries just to see if I could get the alarm to go off as this thing drew next to nothing from Derek's batteries. I got a GOOD 10 minute run, roughly...as I failed to time it...out of the one battery. Watching it run on rather calm waters, I feel I really need to add a spray rail from the bow to at least 1/3 of the length. But it still looks great and runs even better. Next time I will be on both batteries and bump the D/R up to at least 75%.
Enjoy this short video my wife shot and I will process the 131 pictures she also took. She is doing better with every outing.

https://www.youtube.com/watch?v=F9CFSdS ... e=youtu.be
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: Derek's Dad's Scratch Built 1/6 Scale Boat

Post by Derek »

That's cool, Dad! The water was much smoother!
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
west0618
Member
Member
Posts: 115
Joined: Mon Feb 02, 2015 10:40 pm
Location: Fort Wayne, Indiana USA

Re: Derek's Dad's Scratch Built 1/6 Scale Boat

Post by west0618 »

OK then. Here's a slide show of the pictures my wife took today of our outing. I'm impressed. If these cycle too fast please let me know.

https://www.youtube.com/watch?v=mYFWu2b ... e=youtu.be
west0618
Member
Member
Posts: 115
Joined: Mon Feb 02, 2015 10:40 pm
Location: Fort Wayne, Indiana USA

Re: Derek's Dad's Scratch Built 1/6 Scale Boat

Post by west0618 »

We had another GORGEOUS day here in Indiana. An overcast sky but little chance of rain, 72 degrees and next to no wind. My wife and I loaded up my Snapper to try out the third pond in the park we like. The water was as smooth as glass...until I started running. I think I may need to get a second set of batteries at this rate. This run was at 50% max throttle. We had an issue with the camera when I went to 75% so hopefully the next time we'll get some good video at 75% and 100%. For now enjoy our efforts.

https://www.youtube.com/watch?v=o1Wo7ZgSuyA
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: Derek's Dad's Scratch Built 1/6 Scale Boat

Post by Derek »

Very cool video, Dad! The boat looks great!
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
User avatar
Graham Lawrie
Moderator
Moderator
Posts: 5049
Joined: Thu Nov 06, 2014 7:14 pm
Location: Kinlochleven, Scotland
Contact:

Re: Derek's Dad's Scratch Built 1/6 Scale Boat

Post by Graham Lawrie »

Nice box and videos:)
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius




CITIZEN # 521
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: Derek's Dad's Scratch Built 1/6 Scale Boat

Post by Tony »

Excellent boat... Now a submarine with a camera would be mint..lol
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
west0618
Member
Member
Posts: 115
Joined: Mon Feb 02, 2015 10:40 pm
Location: Fort Wayne, Indiana USA

Re: Derek's Dad's Scratch Built 1/6 Scale Boat

Post by west0618 »

Tony...don't think the thought didn't occur to me. For the inevitable (if I live long enough) one that "sinks". Though it would be cheaper (for me) to simply build a bathysphere ( with lights, a camera and RC claw-arm ) and have Derek lower it into the pond where she went down with a helicopter. No? These ponds are deeper than I can wade through. And I am not much of a swimmer.
Post Reply

Return to “Member Logs”