1/6th scale Sea Maid boat
Moderator: Moderators
Forum rules
Members are encouraged to start and keep a single thread for all their RC driving exploits. Alternatively you may start a thread per vehicle. If you wish to post a one-off thread about a particular event you can, but please link to it in your normal thread, and vice versa.
Members are encouraged to start and keep a single thread for all their RC driving exploits. Alternatively you may start a thread per vehicle. If you wish to post a one-off thread about a particular event you can, but please link to it in your normal thread, and vice versa.
1/6th scale Sea Maid boat
Today was the day. August 16th, 2015 just after 12:30pm. It started out nicely overcast with a soft breeze. By the time we got to the pond it was a VERY clear sky…just a few clouds that did little good. And it got hot immediately. Since the last time I’d been to this pond some very long, string-like weeds had taken over areas of the pond. I wandered into these twice filling the propeller. Not good. I overheated the speed controller twice as well…but who’s counting. Both of these will be fixed. The first one just by being more careful along with getting more left rudder control and the second with some ventilation…I hope. With Derek on the still camera and my wife on the video camera we were off.
Here’s 9 pictures from the day followed by a video. I hope you enjoy our efforts. I have a few painting projects on this craft to complete now that I have seen her in action but those will wait until we have solved the overheating issue.
This last picture is of the Snapper out to rescue the Sea Maid by pushing it to shore as we did not know at the time the speed controller was simply overheated. And this was more fun and quicker than getting the fishing pole out.
Now the video...
https://www.youtube.com/watch?v=Eqfe3TT ... e=youtu.be
Here’s 9 pictures from the day followed by a video. I hope you enjoy our efforts. I have a few painting projects on this craft to complete now that I have seen her in action but those will wait until we have solved the overheating issue.
This last picture is of the Snapper out to rescue the Sea Maid by pushing it to shore as we did not know at the time the speed controller was simply overheated. And this was more fun and quicker than getting the fishing pole out.
Now the video...
https://www.youtube.com/watch?v=Eqfe3TT ... e=youtu.be
Re: 1/6th scale Sea Maid boat
I was running the still pics for Dad during this maiden voyage. What a great looking boat!!! It has no troubles plowing through the water. This boat would be a serious "eye catcher" if we took the boat to a more public pond but most of the more public ponds, around here, have water fountains and, according to our city parks department, it's a violation to run rc boats in city ponds with water fountains.
Nonetheless, the maiden voyage of the Sea Maid was awesome fun and it looks great!!!
Nonetheless, the maiden voyage of the Sea Maid was awesome fun and it looks great!!!
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Re: 1/6th scale Sea Maid boat
Nice work! Besides looking like a nascar race on the water, not bad. Little tweak and you'll be F1 in no time.
How come it overheated? No water cooling on the ESC? Is it enclosed so no air cooling either?
How come it overheated? No water cooling on the ESC? Is it enclosed so no air cooling either?
Paul Volcko
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
Re: 1/6th scale Sea Maid boat
Looks great!
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Pulse Battery
Castle Creations
Morgan Fuel
Re: 1/6th scale Sea Maid boat
Shes a beauty
Looks like a nice scale speed.
Looks like a nice scale speed.
GOBLIN 570------IKON
WARP 360--------IKON
QAV 500----------Open Pilot
RCXH250---------Open Pilot
Citizen #229
WARP 360--------IKON
QAV 500----------Open Pilot
RCXH250---------Open Pilot
Citizen #229
Re: 1/6th scale Sea Maid boat
Thanks all. It really runs well. As for overheating the ESC... Hmmm, no there is no water cooling on this ESC or the one on the Snapper. The Snapper was built for one but we had an issue with it and ended up with a non-water cooled ESC. I'm shocked now that I have yet to overheat the Snapper. Currently there is little proper ventilation on either boat. I have some mini cooling fans coming, should be here tomorrow, that should solve the problem. FYI...The transport box weighs in at 15 lb 8 oz and the boat AND box make it in at 28 lbs 3 oz. I really like these for transporting and storage. I ran the maiden voyage on 2 1800 milliampere 65C batteries I bought for the Snapper to see how long they would run it. I'm looking at from 4000-5800 milliampere single battery packs for the final power source. Maybe one more run on my 1800 twin pack once I get it ventilated better. I'm glad you liked it. I was starting to wonder.
- ken jackson
- Member
- Posts: 280
- Joined: Sat Nov 08, 2014 1:17 am
- Location: Chesterton, Indiana
Re: 1/6th scale Sea Maid boat
I'll have to get to Fort Wayne in the spring and hang with you and Derek one Saturday. Do some boating and flying.
Ken
Ken
48" Edge 540T
Alien RR5
TRex 500 DFC w IKON
AS3X A10
VisionAire Flying Fine
Carbon-Z Yak 54 3x Amazing Plane
Flying Since October 2011 DX8 and Phoenix Simulator
Alien RR5
TRex 500 DFC w IKON
AS3X A10
VisionAire Flying Fine
Carbon-Z Yak 54 3x Amazing Plane
Flying Since October 2011 DX8 and Phoenix Simulator
- ken jackson
- Member
- Posts: 280
- Joined: Sat Nov 08, 2014 1:17 am
- Location: Chesterton, Indiana
Re: 1/6th scale Sea Maid boat
I don't have any boats but sure would love to see them in person.
48" Edge 540T
Alien RR5
TRex 500 DFC w IKON
AS3X A10
VisionAire Flying Fine
Carbon-Z Yak 54 3x Amazing Plane
Flying Since October 2011 DX8 and Phoenix Simulator
Alien RR5
TRex 500 DFC w IKON
AS3X A10
VisionAire Flying Fine
Carbon-Z Yak 54 3x Amazing Plane
Flying Since October 2011 DX8 and Phoenix Simulator
Re: 1/6th scale Sea Maid boat
You be sure to let me know when you are back in town, Ken! We'll arrange another outing!!!
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Re: 1/6th scale Sea Maid boat
Just a short video from the point of view of a passenger in the center seat of my 1/6th scale Sea Maid boat. I am quite impressed with the quality considering this was taken with the $30.00 Action Camera Derek and I both bought one of a few weeks ago.
https://www.youtube.com/watch?v=wsC9DUa ... e=youtu.be
https://www.youtube.com/watch?v=wsC9DUa ... e=youtu.be
- Graham Lawrie
- Moderator
- Posts: 5049
- Joined: Thu Nov 06, 2014 7:14 pm
- Location: Kinlochleven, Scotland
- Contact:
Re: 1/6th scale Sea Maid boat
Thats really good you feel as if you are sat there just like Barbie:)LOL great video and perspective:)
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius
CITIZEN # 521
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius
CITIZEN # 521
Re: 1/6th scale Sea Maid boat
Well, it is supposed to be the middle of December here in Indiana but the weather does not seem to realize that. Which is fine with me. Yesterday, on the 12th, we broke the old record with a 67 degree high. I had plenty of other projects in the works that I could have occupied myself with but I knew I would have kicked myself in a few days if I didn't make one more trip to the park. So I loaded up my Sea Maid boat and my wife and I headed out. It was great. A bit windy for my skill level at flying...but not for boating. Please enjoy our latest short video. I have many stills as well that I'll see about sorting through and post a few later.
https://www.youtube.com/watch?v=g16LaGt ... e=youtu.be
https://www.youtube.com/watch?v=g16LaGt ... e=youtu.be
- Graham Lawrie
- Moderator
- Posts: 5049
- Joined: Thu Nov 06, 2014 7:14 pm
- Location: Kinlochleven, Scotland
- Contact:
Re: 1/6th scale Sea Maid boat
Very cool:) and warm at the same time:)
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius
CITIZEN # 521
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius
CITIZEN # 521