13th Annual Northeast Model Helicopter Jamboree
Moderator: Moderators
13th Annual Northeast Model Helicopter Jamboree
So as indicated in my other post I went to an event this past weekend: the 13th Annual Northeast Model Helicopter Jamboree in Macedon, NY!
Okay, so Macedon, NY probably isn't too well known the world over. It is out in the sticks between Rochester, NY and Syracuse, NY. Deep in farm country. Tucked away on the edge of a corn field, bordered by trees and high tension power lines, is the Rochester Aero Modeling Society's main club field. This is Kyle Stacy's home field as well as Chris Reibert's home field. It's a nice flying area with plenty of side to side and outward room for flying any style you please.
It's a three day event, with many people coming in with campers and RVs to stay the whole weekend. A few tent camp it as well. The first day is open flying while people arrive and get settled in. Flying, I'm told, is much more open and laid back. The early comers are usually repeat attendees and there is a "family" atmosphere to the whole thing at this point. They pretty much maxed out their RV/Camper space this year at around 10 or 12 in attendance. The first night there is a group dinner at a near by diner/restaurant where people come together and chat about their year and get reacquainted. If you go it's entirely possible to end up having a meal and talking bikes, travel, politics, and maybe even helis, or whatever with Kyle, Ray, Bert, Chris, and other famous and not.
The second day is the main event with noon time demos covering 3D, scale, turbine, quads, and other aspects of the helicopter part of the hobby. Around 5:30 the main flight line is closed down while the pyrotechnics guys show up and setup for the night time fireworks show. A side flight line is setup while this is going on, with narrower, shorter flying areas out away from the main spectator area. A lot of the up and coming/semi-pro guys took this opportunity to pound out flights without the tension/expectation of the crowd. Bert Kammerer had a number of BK servo and Switch blade rep pilots there and he was out there a good chunk of time helping and mentoring people while throwing down a couple of flights himself. Around this time they also serve the pilot dinner, included with registration, of delicious slow roasted pulled pork, corn on the cob, potato salad, cookie and a drink. Chris Reibert and the RAMS club really do a great job taking care of the pilots and attendees.
Just based on my observation I'd say they had 200 people or so move through the event throughout the day with a solid 50 or so pilots and their families there throughout the day. For the night fly and fireworks show they probably had 100 people there along with the pilot contingent.
The last day is similar to the first. All open flying. The public does show up around noon/1pm to watch, but the crowd is much less and I don't think there is any official demo flight schedule setup during this time. Any remaining raffle items or pilot drawing items are given out and cleanup ensues as the last people pull up stakes and take off for home.
I was only able to attend the 2nd day this time around, though I think I'm going to make the effort to be out there for the full thing next year. Not sure if I'll camp it or use a local hotel or what, but definitely wanting to be there for the 1st and 3rd days too.
I'll be posting up pictures and videos from the event in follow up posts in this thread so check back over the next day or two.
Okay, so Macedon, NY probably isn't too well known the world over. It is out in the sticks between Rochester, NY and Syracuse, NY. Deep in farm country. Tucked away on the edge of a corn field, bordered by trees and high tension power lines, is the Rochester Aero Modeling Society's main club field. This is Kyle Stacy's home field as well as Chris Reibert's home field. It's a nice flying area with plenty of side to side and outward room for flying any style you please.
It's a three day event, with many people coming in with campers and RVs to stay the whole weekend. A few tent camp it as well. The first day is open flying while people arrive and get settled in. Flying, I'm told, is much more open and laid back. The early comers are usually repeat attendees and there is a "family" atmosphere to the whole thing at this point. They pretty much maxed out their RV/Camper space this year at around 10 or 12 in attendance. The first night there is a group dinner at a near by diner/restaurant where people come together and chat about their year and get reacquainted. If you go it's entirely possible to end up having a meal and talking bikes, travel, politics, and maybe even helis, or whatever with Kyle, Ray, Bert, Chris, and other famous and not.
The second day is the main event with noon time demos covering 3D, scale, turbine, quads, and other aspects of the helicopter part of the hobby. Around 5:30 the main flight line is closed down while the pyrotechnics guys show up and setup for the night time fireworks show. A side flight line is setup while this is going on, with narrower, shorter flying areas out away from the main spectator area. A lot of the up and coming/semi-pro guys took this opportunity to pound out flights without the tension/expectation of the crowd. Bert Kammerer had a number of BK servo and Switch blade rep pilots there and he was out there a good chunk of time helping and mentoring people while throwing down a couple of flights himself. Around this time they also serve the pilot dinner, included with registration, of delicious slow roasted pulled pork, corn on the cob, potato salad, cookie and a drink. Chris Reibert and the RAMS club really do a great job taking care of the pilots and attendees.
Just based on my observation I'd say they had 200 people or so move through the event throughout the day with a solid 50 or so pilots and their families there throughout the day. For the night fly and fireworks show they probably had 100 people there along with the pilot contingent.
The last day is similar to the first. All open flying. The public does show up around noon/1pm to watch, but the crowd is much less and I don't think there is any official demo flight schedule setup during this time. Any remaining raffle items or pilot drawing items are given out and cleanup ensues as the last people pull up stakes and take off for home.
I was only able to attend the 2nd day this time around, though I think I'm going to make the effort to be out there for the full thing next year. Not sure if I'll camp it or use a local hotel or what, but definitely wanting to be there for the 1st and 3rd days too.
I'll be posting up pictures and videos from the event in follow up posts in this thread so check back over the next day or two.
Paul Volcko
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
Re: 13th Annual Northeast Model Helicopter Jamboree
Here's pics of some of the helis there. I'm looking for some more on FB and elsewhere. There should be group photo of all the goblins there (it was definitely goblin country).
The scale helis at the top of this set are award winning models. The guy who build and flys them (Don, sorry didn't get his last name) travels all over the US and Canada. The detail on these were pretty incredible.
The red and white scale heli is owned by Chris Riebert from his time as a Team pilot for RC Aerodyne. It's a beautiful heli. I didn't see him fly it this year, but it was nice to see it out on display again.
The scale helis at the top of this set are award winning models. The guy who build and flys them (Don, sorry didn't get his last name) travels all over the US and Canada. The detail on these were pretty incredible.
The red and white scale heli is owned by Chris Riebert from his time as a Team pilot for RC Aerodyne. It's a beautiful heli. I didn't see him fly it this year, but it was nice to see it out on display again.
- Attachments
-
- helis-9.jpg (200.34 KiB) Viewed 3019 times
-
- helis-8.jpg (154.31 KiB) Viewed 3019 times
-
- helis-7.jpg (93.89 KiB) Viewed 3019 times
-
- helis-6.jpg (136.46 KiB) Viewed 3019 times
-
- helis-5.jpg (157.43 KiB) Viewed 3019 times
-
- helis-4.jpg (141.71 KiB) Viewed 3019 times
-
- helis-3.jpg (150.28 KiB) Viewed 3019 times
-
- helis-2.jpg (203.09 KiB) Viewed 3019 times
-
- helis-1.jpg (202.62 KiB) Viewed 3019 times
Paul Volcko
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
Re: 13th Annual Northeast Model Helicopter Jamboree
Also got video of some of the noon-time demos (and a couple others).
First up was AJ Jaffe
https://www.youtube.com/watch?v=IESYip6wFcw
Then Chris Diamanti
https://www.youtube.com/watch?v=nFOGIFXoCyw
A little later was Andrew Merlino, it didn't go well...
https://www.youtube.com/watch?v=x99xMHpAAVM
The aftermath:
Kyle Stacy and Bert Kammerer did a tamdem demo
https://www.youtube.com/watch?v=NauV_HeE44A
And a little later Kyle did a solo demo with Bert spotting him and harrassing Kyle during his flight (like he normally does when he's spotting) to "help" him do better.
https://www.youtube.com/watch?v=1gci9_K9aFM
Bert didn't do a solo noon demo, though he was helping out Ray Stacy on the mic during all of the demo flights. So I got a couple vids of his flying later in the day. Here's the first.
https://www.youtube.com/watch?v=Jnvfzfka_2Q
Theres a couple more day time flights to upload, they'll got posted later in the day. I recorded some night flights too, but I haven't viewed them yet to see if they came out good or not. IF so, those will get posted up late tonight or tomorrow morning.
First up was AJ Jaffe
https://www.youtube.com/watch?v=IESYip6wFcw
Then Chris Diamanti
https://www.youtube.com/watch?v=nFOGIFXoCyw
A little later was Andrew Merlino, it didn't go well...
https://www.youtube.com/watch?v=x99xMHpAAVM
The aftermath:
Kyle Stacy and Bert Kammerer did a tamdem demo
https://www.youtube.com/watch?v=NauV_HeE44A
And a little later Kyle did a solo demo with Bert spotting him and harrassing Kyle during his flight (like he normally does when he's spotting) to "help" him do better.
https://www.youtube.com/watch?v=1gci9_K9aFM
Bert didn't do a solo noon demo, though he was helping out Ray Stacy on the mic during all of the demo flights. So I got a couple vids of his flying later in the day. Here's the first.
https://www.youtube.com/watch?v=Jnvfzfka_2Q
Theres a couple more day time flights to upload, they'll got posted later in the day. I recorded some night flights too, but I haven't viewed them yet to see if they came out good or not. IF so, those will get posted up late tonight or tomorrow morning.
Paul Volcko
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
Re: 13th Annual Northeast Model Helicopter Jamboree
Here's another pic, this one of Chris Reibert walking back after collecting his Goblin 700 KSE from a crash. He got a little too aggressive, tried to trim the weeds while doing aileron tic tocs. Luckily he only ended up cracking up the main rotor blades and a couple of servo horns. I ended up giving him the blades off my KSE (the one I bought a month ago) in exchange for the money to buy a new set. Sadly, I'm not finding anyplace with them for sale. Might have to spring for a set of Helix blade instead. Wish Switch had the three blade sets going.
Paul Volcko
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
Re: 13th Annual Northeast Model Helicopter Jamboree
Here's another Bert Kammerer flight. He had a bit of a hiccup initially. Turns out even the pros grab the uncharged pack sometimes. This is his flight after swapping out.
https://www.youtube.com/watch?v=rv1vapGNzEc
https://www.youtube.com/watch?v=rv1vapGNzEc
Paul Volcko
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
Re: 13th Annual Northeast Model Helicopter Jamboree
Another video I found on YouTube. Overhead view of... maybe... Chris Diamanti flying?
https://youtu.be/z8eknpgVv2g
Update: it is a video by Tony DiNicola of Aaron Pitts flying.
https://youtu.be/z8eknpgVv2g
Update: it is a video by Tony DiNicola of Aaron Pitts flying.
Paul Volcko
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
- Graham Lawrie
- Moderator
- Posts: 5049
- Joined: Thu Nov 06, 2014 7:14 pm
- Location: Kinlochleven, Scotland
- Contact:
Re: 13th Annual Northeast Model Helicopter Jamboree
WOW THE BEST POST BY FAR ON THE HANGOUT:) NICE ONE PAUL:)
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius
CITIZEN # 521
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius
CITIZEN # 521
Re: 13th Annual Northeast Model Helicopter Jamboree
Another video from the noon demos. Not sure who this pilot is. I can't make out the announcement at the beginning.
https://www.youtube.com/watch?v=fhavg_BA8cc
https://www.youtube.com/watch?v=fhavg_BA8cc
Paul Volcko
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
Re: 13th Annual Northeast Model Helicopter Jamboree
Kyle Stacy Night flight:
https://youtu.be/PKaoL1qxlOc
There is a playlist of all these videos and more I'll be collecting here: https://www.youtube.com/playlist?list=P ... PmHzJ64EMQ
My other night vids didn't come out too well (night video on a phone is also tricky) and I didn't record any of the big fireworks + helicopter show since I wanted to actually watch it instead of half experience it through the video camera. Hopefully someone else captured it and I'll be able to add the video here later.
https://youtu.be/PKaoL1qxlOc
There is a playlist of all these videos and more I'll be collecting here: https://www.youtube.com/playlist?list=P ... PmHzJ64EMQ
My other night vids didn't come out too well (night video on a phone is also tricky) and I didn't record any of the big fireworks + helicopter show since I wanted to actually watch it instead of half experience it through the video camera. Hopefully someone else captured it and I'll be able to add the video here later.
Paul Volcko
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
- Graham Lawrie
- Moderator
- Posts: 5049
- Joined: Thu Nov 06, 2014 7:14 pm
- Location: Kinlochleven, Scotland
- Contact:
Re: 13th Annual Northeast Model Helicopter Jamboree
Great link:) loads to watch:)
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius
CITIZEN # 521
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius
CITIZEN # 521
Re: 13th Annual Northeast Model Helicopter Jamboree
Here's a pic (bit of an odd angle) of the Goblin lineup at the event.
This may have actually been the BK Products photo, which ended up having about 1/2 the helis compared to the Goblin photo lineup.
This may have actually been the BK Products photo, which ended up having about 1/2 the helis compared to the Goblin photo lineup.
Paul Volcko
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
Re: 13th Annual Northeast Model Helicopter Jamboree
Let's try this. Facebook video segment of the first Bert flight posted above, but from up close:
https://video-ord1-1.xx.fbcdn.net/hvide ... e=55E5BCBA
https://video-ord1-1.xx.fbcdn.net/hvide ... e=55E5BCBA
Paul Volcko
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
Re: 13th Annual Northeast Model Helicopter Jamboree
These, and the post before, are from Tony DiNicola.
Another clip of that Bert flight: https://video-ord1-1.xx.fbcdn.net/hvide ... e=55E5B9E3
There was a mini-speed competition as well. Kyle Stacy won with a 111mph run, edging out the runner up by 1mph. Kyle graciously gave up the prize, a $100 scorpion gift certificate, to that 110mph run runner-up. This pass, unfortunately, is not either of them: https://video-ord1-1.xx.fbcdn.net/hvide ... e=55E5BF14
Update: Okay these may not work... Will try soemthing else.
Another clip of that Bert flight: https://video-ord1-1.xx.fbcdn.net/hvide ... e=55E5B9E3
There was a mini-speed competition as well. Kyle Stacy won with a 111mph run, edging out the runner up by 1mph. Kyle graciously gave up the prize, a $100 scorpion gift certificate, to that 110mph run runner-up. This pass, unfortunately, is not either of them: https://video-ord1-1.xx.fbcdn.net/hvide ... e=55E5BF14
Update: Okay these may not work... Will try soemthing else.
Paul Volcko
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
Re: 13th Annual Northeast Model Helicopter Jamboree
Awesome videos dude
I would love to see these guys live.
I would love to see these guys live.
GOBLIN 570------IKON
WARP 360--------IKON
QAV 500----------Open Pilot
RCXH250---------Open Pilot
Citizen #229
WARP 360--------IKON
QAV 500----------Open Pilot
RCXH250---------Open Pilot
Citizen #229
Re: 13th Annual Northeast Model Helicopter Jamboree
Here's links to the FB posts instead of to the videos directly, maybe these will work, let me know.
Bert clip 1: https://www.facebook.com/fall2fast/vide ... 516409849/
Bert clip 2: https://www.facebook.com/fall2fast/vide ... 487569128/
Speed run: https://www.facebook.com/fall2fast/vide ... 697549378/
Bert clip 1: https://www.facebook.com/fall2fast/vide ... 516409849/
Bert clip 2: https://www.facebook.com/fall2fast/vide ... 487569128/
Speed run: https://www.facebook.com/fall2fast/vide ... 697549378/
Paul Volcko
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
- Graham Lawrie
- Moderator
- Posts: 5049
- Joined: Thu Nov 06, 2014 7:14 pm
- Location: Kinlochleven, Scotland
- Contact:
Re: 13th Annual Northeast Model Helicopter Jamboree
Very cool:) they all worked Paul:)
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius
CITIZEN # 521
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius
CITIZEN # 521
Re: 13th Annual Northeast Model Helicopter Jamboree
Bert posted this on Facebook today.. Paul ur movie star! Looks like a fun event.
http://youtu.be/a6Akekj04-M
http://youtu.be/a6Akekj04-M
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Pulse Battery
Castle Creations
Morgan Fuel
Re: 13th Annual Northeast Model Helicopter Jamboree
Watching it now. I haven't had a chance to view this yet.
...
Oh man, was so hoping they had video of the flights after the drawing.
...
Oh man, was so hoping they had video of the flights after the drawing.
Paul Volcko
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
Re: 13th Annual Northeast Model Helicopter Jamboree
I'll also say this, those charging cases shown toward the beginning when they had a shot of the RC Heli Pilot table... those are way bigger than you think. Well, they were way bigger than I thought they were. The one on the right is practically a suitcase. Reminded me of something like the old original portable computers in size (with the 5.25" floppy disk drives and the small build in CRT screen and a fold down keyboard). The one on the left was smaller but still talking the width and length of a 17" laptop computer. I was just really surprised at how large and heavy the charging case was, particularly the one on the right.
And the video didn't do the night fly and fireworks show justice. It really was a great show. Well worth the wait to hang out there late.
And the video didn't do the night fly and fireworks show justice. It really was a great show. Well worth the wait to hang out there late.
Paul Volcko
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
- Graham Lawrie
- Moderator
- Posts: 5049
- Joined: Thu Nov 06, 2014 7:14 pm
- Location: Kinlochleven, Scotland
- Contact:
Re: 13th Annual Northeast Model Helicopter Jamboree
Brilliant video Paul:) recognize that guy with Kyle:)LOL
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius
CITIZEN # 521
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius
CITIZEN # 521