TBS DISCOVERY :)

Graham Lawrie · Post by **Graham Lawrie** » Sat Sep 26, 2015 7:44 pm

The TBS Lee?

Lee · Post by **Lee** » Sat Sep 26, 2015 7:50 pm

No the FC system

Graham Lawrie · Post by **Graham Lawrie** » Sat Sep 26, 2015 8:04 pm

So far straight forward Lee, even for me:) Got it all wired and powered up, just looking at getting the software on my laptop and hopefully programme it tomorrow.

The quality of the equipment is good for what you pay:) I got mine for £67 from BG.

Pics and more info tomorrow:)

Graham Lawrie · Post by **Graham Lawrie** » Sun Sep 27, 2015 10:01 am

Found this very helpful and best set up video for the JIYI P2:)
https://www.youtube.com/watch?v=aoTDEkpfWEY

Post by **danhampson** » Tue Sep 29, 2015 5:16 pm

looks like a great unit for a larger machine and at a great price,

Graham Lawrie · Post by **Graham Lawrie** » Thu Oct 15, 2015 2:44 am

Wee update:(

I have spent a lot of time trying to get this to work. All of the information followed to the letter, but cant get to the calibration stage:(

I have emailed the suppliers and gone through the normal QA with them back and forth tried everything suggested and cant get to the stage where the light stays solid and then you do the calibration dance, which i hasten to add makes me dizzy the amount of turns you do.

My last 4 emails have been un answered. What i have posted here is the best info i can find:(
I got that frustrated i moved the sticks all over the place and left stick top right and right stick top left and i get a solid light, move the sticks and it blinks again.
You have to pass the calibration in order to get it to arm!!

So until i figure it out, i am stuffed!!
Very frustrating!!
So, poor customer service from which really is a proto type, well built for the money, but not intuitive,and not recommended at this stage.
I will not give up, but very close to it, at the stage of wishing i got a Naza M:)

Graham Lawrie · Post by **Graham Lawrie** » Wed Mar 30, 2016 8:40 pm

Given up trying to get the JIYI to work:( buying a second hand DJI Naza M V2:)

Stambo · Post by **Stambo** » Wed Mar 30, 2016 10:33 pm

Graham Lawrie wrote:Given up trying to get the JIYI to work:( buying a second hand DJI Naza M V2:)

Have you got the address in China where it will fly away to?

Post by **danhampson** » Thu Mar 31, 2016 2:55 pm

Are you still having gps issues?

Graham Lawrie · Post by **Graham Lawrie** » Thu Mar 31, 2016 5:11 pm

danhampson wrote:Are you still having gps issues?

Yes Dan , and without locking in on satellites i cant arm it:( So time to change:) I have had the TBS long enough now and want it flying for video. Got the offer of a Naza from a guy on FPV Scotland cheap so i bought it:)

wolfman76 · Post by **wolfman76** » Thu Apr 14, 2016 6:56 am

Graham Lawrie wrote:
danhampson wrote:Are you still having gps issues?
Yes Dan , and without locking in on satellites i cant arm it:( So time to change:) I have had the TBS long enough now and want it flying for video. Got the offer of a Naza from a guy on FPV Scotland cheap so i bought it:)

how much you get it for graham i still have a brand new never used dji naza w/gps v1 for sell i had bought for the tbs disco i use to have

Graham Lawrie · Post by **Graham Lawrie** » Thu Apr 14, 2016 8:15 pm

Got it for £60 Kyle which is cheap for here:) seen them go on ebay for over £100

Graham Lawrie · Post by **Graham Lawrie** » Sun Apr 17, 2016 10:31 am

I have just bought these second hand to try before i go for an expensive motor set:)

Graham Lawrie · Post by **Graham Lawrie** » Sun Apr 24, 2016 5:35 pm

New motors fitted

Stambo · Post by **Stambo** » Mon Apr 25, 2016 4:35 am

Watch those prop adapters Graham, they are quite soft and bend very easy.
Some of them even come pre bent from the factory.

Graham Lawrie · Post by **Graham Lawrie** » Mon Apr 25, 2016 6:36 am

Stambo wrote:Watch those prop adapters Graham, they are quite soft and bend very easy.
Some of them even come pre bent from the factory.

Do you mean the spacers that fit under the props Stambo?

Stambo · Post by **Stambo** » Mon Apr 25, 2016 8:26 pm

Graham Lawrie wrote:
Stambo wrote:Watch those prop adapters Graham, they are quite soft and bend very easy.
Some of them even come pre bent from the factory.
Do you mean the spacers that fit under the props Stambo?

The whole alloy prop adapter that screws to the top of the motor.
I have had several that were bent from minor ground strikes with the props, not even enough to break the props.
Also some that were bent before I put them on.

http://www.hobbyking.com/hobbyking/stor ... _Pack.html

Graham Lawrie · Post by **Graham Lawrie** » Tue May 03, 2016 6:57 pm

A double for me tonight

Maiden the TBS DISCO and Olfi camera . TBS hovered hands free. Video to follow

Graham Lawrie · Post by **Graham Lawrie** » Wed May 04, 2016 5:18 am

This is at 24fps so a bit jittery:)

https://youtu.be/wwpotJuEIjs

cml001 · Post by **cml001** » Wed May 04, 2016 11:42 am

Score! One of the guys had this platform at the Expo over the weekend. They are very nice!

RC-Hangout

TBS DISCOVERY :)

Re: TBS DISCOVERY :)

Re: TBS DISCOVERY :)

Re: TBS DISCOVERY :)

Re: TBS DISCOVERY :)

Re: TBS DISCOVERY :)

Re: TBS DISCOVERY :)

Re: TBS DISCOVERY :)

Re: TBS DISCOVERY :)

Re: TBS DISCOVERY :)

Re: TBS DISCOVERY :)

Re: TBS DISCOVERY :)

Re: TBS DISCOVERY :)

Re: TBS DISCOVERY :)

Re: TBS DISCOVERY :)

Re: TBS DISCOVERY :)

Re: TBS DISCOVERY :)

Re: TBS DISCOVERY :)

Re: TBS DISCOVERY :)

Re: TBS DISCOVERY :)

Re: TBS DISCOVERY :)