Clay's Video/Picture Flight Log

[pvolcko]

I climb like crazy when I try to go faster with a stronger camera tilt. We'll see how this weekend's race event goes.

[cml001]

Fun at the park down the street with my quad & Levar's Losi 5ive this morning.. flew till my camera lens came loose.. but it was fun chasing the truck.. I didn't edit.. sorry.
https://youtu.be/d4c_jDAU--w

And a flight before clocking in at work... pretty fun to fly at work too!
https://youtu.be/QFwnaGs544I

Night flight at the Botos ranch for the annual Heli Swarm this past weekend.. this is Sexton's N7 and was flown by everyone out there.. we treated it like a dirty whore! Lol.. the one way was locked up.. servos were feeling loose around center stick.. but we kept fly'n her anyway.. this was Rob's flight.. he hurricane'd Matt's pecan tree which was way right of our standing and invisible at night.. u can see it disappear.. epic! Matt's commentary over the PA was classic.. good times!
https://youtu.be/jwVKTTVuKAE

Earlier that day Matt obliterated his N7 trying to make it between these two trees out about 300 yards from the flightline... the Rob did the same with his E7SE... Brian offered his E5S for another attempt.. we went down to the trees to give the "pull up" signal.. almost another catastrophe.. but was awesome... trimmed the top of the trees.. so after 2 fails.. here is the successful 3rd, 4th, & 5th(backwards inverted no less!).. listen for the tree chop on the first pass. And also the carcass's of the N7 & E7SE that didn't make it.
https://youtu.be/jITz-uMZGZQ

[DOG]

OUCH Clay Did you do that? Looks like something I would do to my heli when I go flying

[cml001]

No.. read above.. that was "Boss Man" Matt Botos & Mr Rob Cherry. Check out the videos!

[pvolcko]

That's a bit nuts.

[cml001]

Some fun at home today... sound is offset.. drives me nuts.. anyhow.. enjoy the ride!
https://youtu.be/Zmj744eBKjE

[DOG]

Look at you go Clay . It didn't take you no time to learn how to fly FPV, did it. My googles http://graysonhobby.com/eachine-vr-007-fpv-goggles.html should be in at the end of the month . For my first quad, I'm not sure which one to get as a first time FPV flyer This one http://graysonhobby.com/blade-fpv-induc ... drone.html or this one http://www.banggood.com/Eachine-Tiny-QX ... rmmds=cart Any suggestion or advice would be appreciated by me

[cml001]

I'm not sure about the micro quads.. we fly tiny woops at a buddies house on occasion.. I think they are modified Blade Inductrix quads... pretty fun in the house.. but I honestly couldn't tell u much about them.. been looking for a Futaba compatible micro myself.

[Stambo]

DOG I would go for the Inductrix simply because of the protected props.
Flying FPV inside the house is lots of fun when you can bump into things and just keep flying.

[DOG]

Thanks Clay for being honest about not knowing about micro.

[DOG]

Hey there Stambo. I found out that the QX95 does have prop guards. I would like to fly inside and out but not spend crazy money if you know what I mean

[cml001]

Keena took some pic while I was fly'n around the yard..

[Graham Lawrie]

Great pictures:)

[cml001]

Good day at the field with the crew.. got some on the E5S, N5C, & the QAV X was tested with the new ground station.. good day! I've got video in the goggles DVR to download.. but here are some pics.. good day!

[Graham Lawrie]

Thats a lot of kit:)

[cml001]

Keena recorded a flight around the hood...
https://youtu.be/T8rtwxT1__Q

[Stambo]

Nice, and was that the wife on the camera?
That was some impressive camera work.

[cml001]

Just about all videos I post from this kind of viewing angle are her shooting.. she does a great job man I'm tell'n ya!

[Graham Lawrie]

She sounds sweet well tuned in:) so does the quad LOL:)

Great flying Clay:) and a deflated Santa on the neighbours lawn:)

[cml001]

Lol.. had them turned off.. was rainy by just prior to the flight.. I'll get another with them on later!