Holybro Shuriken 180 update and more...

Discussion, questions, builds, and tutorials on micro and mini (250 and under) size multi-rotors.

Moderator: Moderators

Post Reply
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Holybro Shuriken 180 update and more...

Post by Derek »

I finally got some decent weather, the other day. Charged up some 3S and 4S 1300mah packs and headed to my flying field with the Shuriken 180. 3S first....it lifted from the ground with no troubles and I just flew around the field a bit. It's got plenty of climb power, weighing 105grams less than my ZMR250, lol. I tried a roll and it was very very sluggish. Wasn't sure if it was going to make it all the way around, ha ha ha. I landed and plugged it into my laptop. I found that my Roll, Pitch, and Yaw rates were all set to 0. Oooops...forgot to change that in the preflight setup. I changed those rates to .45 and tried again. It flips very well. I have to say....this Shuriken 180 is great! I plugged in a 4S pack and it did not take long before my heart was pounding and my legs were shaking (no joke, lol). I could easily tell the difference between 3S and 4S. WOW! The power was amazing! What a great ride!!! I will try to mount my Mobius to the Shuriken next time.

Ok, so that's the update on the 180. Here's the "more" part...

The other day, I met a guy that lives only a few miles away from me. He is a member of a Facebook group that I've found for local flyers. He has a Fossil's Gravity 250 frame that he is looking to sell. He bought it late last year and he said it's just sat around. I jumped on it! He and I are going to meet tomorrow and then I'll be the new proud owner of a Gravity 250....which is the same frame that I was thinking about getting before I decided on getting the Shuriken 180. TOO COOL!!!
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
User avatar
DOG
Member
Member
Posts: 1786
Joined: Fri Mar 06, 2015 4:03 am
Location: Inverness Florida

Re: Holybro Shuriken 180 update and more...

Post by DOG »

Excellent find Derek :). I know you been wanting one for awhile now 8-)
HK 500 DFC
Gaui X3L
Tarot 450DFC scale/Coastguard
Fossil 180
Fossil 210
Citizen member #00748
User avatar
Graham Lawrie
Moderator
Moderator
Posts: 5049
Joined: Thu Nov 06, 2014 7:14 pm
Location: Kinlochleven, Scotland
Contact:

Re: Holybro Shuriken 180 update and more...

Post by Graham Lawrie »

Nice one Derek:) welcome to the club:) indestructible frame:)
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius




CITIZEN # 521
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: Holybro Shuriken 180 update and more...

Post by Derek »

I should be picking up the Gravity 250 today. Time to shop for parts....YAY!
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
User avatar
KevG
Supporter
Supporter
Posts: 1642
Joined: Fri Nov 07, 2014 4:59 pm
Location: South Wales, UK

Re: Holybro Shuriken 180 update and more...

Post by KevG »

whoo hoo Derek, wicked mate.

Go for small esc's like the emax bullet series and an fc like the Kombini as the fact you then don't need a pdb save loads of room.
Minor league Aviator, against gravity which normally wins!

RotoriousFPV quads Micro Rad 3" Gat 4" and Rad 5"
D-Quad Obsession
Yuneec Typhoon H
Taranis Qx7,
User avatar
Graham Lawrie
Moderator
Moderator
Posts: 5049
Joined: Thu Nov 06, 2014 7:14 pm
Location: Kinlochleven, Scotland
Contact:

Re: Holybro Shuriken 180 update and more...

Post by Graham Lawrie »

KevG wrote:whoo hoo Derek, wicked mate.

Go for small esc's like the emax bullet series and an fc like the Kombini as the fact you then don't need a pdb save loads of room.
The copper plate worked well in mine space wise:)
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius




CITIZEN # 521
Post Reply

Return to “Micros and Minis”