Zeal 210mm for Trex 250

Questions and discussion about main and tail blades

Moderator: Moderators

User avatar
KevG
Supporter
Supporter
Posts: 1642
Joined: Fri Nov 07, 2014 4:59 pm
Location: South Wales, UK

Zeal 210mm for Trex 250

Post by KevG »

Well I have had a little time to have a look at these blades, and yes they look the business but the do have a couple of little blemishes, but realy nowt to write home about, they came boxed in a clear plastic sheath with a card back, and the blades were wrapped in a thin foam sheet, so have to say it's nice to see a bit of care,

Well here's the first look outside of the packaging,
image.jpg
image.jpg (812.99 KiB) Viewed 7071 times
They have a nice design on the top but man the shimmery logo on the bottom is nice,

And here is a side by side of them to the stock blades, as you can see the stock blades have more chord close to the root but a quite small amount less at the tip.
image.jpg
image.jpg (812.77 KiB) Viewed 7071 times
A few stats now,

These new blades weigh 19.57g where the stock actually weigh 17.42g
image.jpg
image.jpg (841.63 KiB) Viewed 7071 times
image.jpg
image.jpg (810.53 KiB) Viewed 7071 times
The next thing I looked at was the CoG and this on the new blades is 110mm from hole, on the old they were 95mm from hole,

The balance of these blades is nigh on smack on, impressed fair play, it don't happen on many sets,
image.jpg
image.jpg (1.13 MiB) Viewed 7071 times
Next will be flying them, and more to report then......
Minor league Aviator, against gravity which normally wins!

RotoriousFPV quads Micro Rad 3" Gat 4" and Rad 5"
D-Quad Obsession
Yuneec Typhoon H
Taranis Qx7,
User avatar
pvolcko
Site Admin
Site Admin
Posts: 2197
Joined: Thu Nov 06, 2014 3:18 pm
Location: Syracuse, NY
Contact:

Re: Zeal 210mm for Trex 250

Post by pvolcko »

Nice. I'll probably try to pick up a set of these after my next crash. :) Looking forward to your report!
Paul Volcko
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
User avatar
Graham Lawrie
Moderator
Moderator
Posts: 5049
Joined: Thu Nov 06, 2014 7:14 pm
Location: Kinlochleven, Scotland
Contact:

Re: Zeal 210mm for Trex 250

Post by Graham Lawrie »

Very nice Kev:) Like i said my first ones had two imperfections, second set i could not fault. The worry now is going on the 3 of us that have them its over a 50% rate of perfection:( And you never got a coffin with yours?
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius




CITIZEN # 521
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: Zeal 210mm for Trex 250

Post by Tony »

Very good report there Kev, very thorough, be nice to hear the results of the flight test...
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
User avatar
KevG
Supporter
Supporter
Posts: 1642
Joined: Fri Nov 07, 2014 4:59 pm
Location: South Wales, UK

Re: Zeal 210mm for Trex 250

Post by KevG »

Yeah a bit small for a coffin, seen as that would raise the weight for shipping considerably, and they are going to want to be competitive against the oem blades price wise,

Not sure how the extra weight towards the tip will make these feel, I know it's down to the chord of the stock blades being wider, but that's where the blade is less effective anyway, if the weather holds off I might try to get a flight in on them tomorrow
Minor league Aviator, against gravity which normally wins!

RotoriousFPV quads Micro Rad 3" Gat 4" and Rad 5"
D-Quad Obsession
Yuneec Typhoon H
Taranis Qx7,
User avatar
Graham Lawrie
Moderator
Moderator
Posts: 5049
Joined: Thu Nov 06, 2014 7:14 pm
Location: Kinlochleven, Scotland
Contact:

Re: Zeal 210mm for Trex 250

Post by Graham Lawrie »

One thing i have noticed, the same with my 550 (RHP) the blades come pre-balanced and they are the cheapest on the market-ish:) Leading manufactures pay attention:)
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius




CITIZEN # 521
User avatar
cml001
Supporter
Supporter
Posts: 2882
Joined: Fri Nov 07, 2014 4:46 pm
Location: Augusta GA

Re: Zeal 210mm for Trex 250

Post by cml001 »

Kool!
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
User avatar
murankar
Supporter
Supporter
Posts: 1557
Joined: Sat Nov 08, 2014 5:29 pm
Location: Mentor, Ohio

Re: Zeal 210mm for Trex 250

Post by murankar »

Helps more for the fbl controller and stability. The heaver blade will help with stability also. Its almost like fly bar weights.
Matthias "URI X3" Urankar | Citizen 00742
Kit: Gaui X3
Servos: BK BL 3001 HV, BL 5005 HV
Motor: Scorpion HK 2520-3500 Kv
TX/RX: Specktrum DX6, VControl
Charger: PowerLabs PL6
Batteries: Pulse Ultra 2250, 35C
User avatar
KevG
Supporter
Supporter
Posts: 1642
Joined: Fri Nov 07, 2014 4:59 pm
Location: South Wales, UK

Re: Zeal 210mm for Trex 250

Post by KevG »

Yeah I'm looking forward to trying these, stability is good for me, but the thing in the back of my mind is they produce these blades to do bad ass 3d, so don't quite know what to expect.
Minor league Aviator, against gravity which normally wins!

RotoriousFPV quads Micro Rad 3" Gat 4" and Rad 5"
D-Quad Obsession
Yuneec Typhoon H
Taranis Qx7,
User avatar
KevG
Supporter
Supporter
Posts: 1642
Joined: Fri Nov 07, 2014 4:59 pm
Location: South Wales, UK

Re: Zeal 210mm for Trex 250

Post by KevG »

Just read a review over on the Zeal threads by another tester, and he really liked them said there was a huge difference, much lighter feel to the heli, and snappier in transactions, plus they sound nicer, I'm sold, I got to fly these things

Please behave Mother Nature, nice fine day tomorrow, come on!
Minor league Aviator, against gravity which normally wins!

RotoriousFPV quads Micro Rad 3" Gat 4" and Rad 5"
D-Quad Obsession
Yuneec Typhoon H
Taranis Qx7,
User avatar
murankar
Supporter
Supporter
Posts: 1557
Joined: Sat Nov 08, 2014 5:29 pm
Location: Mentor, Ohio

Re: Zeal 210mm for Trex 250

Post by murankar »

That extra weight adds to the disk loading also. Heavier loading nets crisper 3d moves.
Matthias "URI X3" Urankar | Citizen 00742
Kit: Gaui X3
Servos: BK BL 3001 HV, BL 5005 HV
Motor: Scorpion HK 2520-3500 Kv
TX/RX: Specktrum DX6, VControl
Charger: PowerLabs PL6
Batteries: Pulse Ultra 2250, 35C
User avatar
KevG
Supporter
Supporter
Posts: 1642
Joined: Fri Nov 07, 2014 4:59 pm
Location: South Wales, UK

Re: Zeal 210mm for Trex 250

Post by KevG »

Well here's my baby with her new blades, looks like a proper set up now,
image.jpg
image.jpg (850.58 KiB) Viewed 7046 times
Minor league Aviator, against gravity which normally wins!

RotoriousFPV quads Micro Rad 3" Gat 4" and Rad 5"
D-Quad Obsession
Yuneec Typhoon H
Taranis Qx7,
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: Zeal 210mm for Trex 250

Post by Tony »

Very nice bird Kev, smart as...
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
User avatar
KevG
Supporter
Supporter
Posts: 1642
Joined: Fri Nov 07, 2014 4:59 pm
Location: South Wales, UK

Re: Zeal 210mm for Trex 250

Post by KevG »

Well I said I would update this after I flew them,

First the sound, they actually sound really crisp, where as the stock blades sound a bit more turbulent,

First impression,
Put the heli in the air and first thing I noticed was the balance of the blades gave no visible vibe on spool up or run down,
In to the hover and they felt really stable, disc could be more visible on top side, need more white colour or something brighter than the green,
How do they fly, well surprisingly good actually they change direction very sharply and quick, but they can be subtle as well, with the stock blades they used to stall easy, these Zeals did not tend to do it, pitch changes were awesome, and even when neg to positive change it seemed to cope a lot better with it, and even at 85% throttle it still took off like a scolded cat, although I had to reduce my cyclic gain a tad to stop the cyclic wobble after a hard pitch change,

Overall

I seriously liked these out of the box, they felt sharp without being frightening but had the ability to be incredibly stable, they almost felt like they made the heli lighter,
like I said the only down point I could find was the disc visibility could be better,

I recon a good 9 out of 10, seriously better than stock,
Minor league Aviator, against gravity which normally wins!

RotoriousFPV quads Micro Rad 3" Gat 4" and Rad 5"
D-Quad Obsession
Yuneec Typhoon H
Taranis Qx7,
User avatar
murankar
Supporter
Supporter
Posts: 1557
Joined: Sat Nov 08, 2014 5:29 pm
Location: Mentor, Ohio

Re: Zeal 210mm for Trex 250

Post by murankar »

Looks like I have a future replacement part to look for. For now its Gaui blades until they meet Terra ferma.
Matthias "URI X3" Urankar | Citizen 00742
Kit: Gaui X3
Servos: BK BL 3001 HV, BL 5005 HV
Motor: Scorpion HK 2520-3500 Kv
TX/RX: Specktrum DX6, VControl
Charger: PowerLabs PL6
Batteries: Pulse Ultra 2250, 35C
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: Zeal 210mm for Trex 250

Post by Tony »

Very good review of the blades Kev. I'm going to put better blades on my mongrel 450, so these zeal one sound like a first choice. Did you get them from UK stockist?

Found a shop in UK but they only have red and green....!!
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
User avatar
KevG
Supporter
Supporter
Posts: 1642
Joined: Fri Nov 07, 2014 4:59 pm
Location: South Wales, UK

Re: Zeal 210mm for Trex 250

Post by KevG »

Yes that's the only UK stockist, not sure if you can get another colour in the 325mm blades,
Minor league Aviator, against gravity which normally wins!

RotoriousFPV quads Micro Rad 3" Gat 4" and Rad 5"
D-Quad Obsession
Yuneec Typhoon H
Taranis Qx7,
User avatar
Lee
Moderator
Moderator
Posts: 1824
Joined: Fri Nov 07, 2014 6:16 pm
Location: Tarifa, Spain

Re: Zeal 210mm for Trex 250

Post by Lee »

I will be trying these, when I next crash :)
GOBLIN 570------IKON
WARP 360--------IKON
QAV 500----------Open Pilot
RCXH250---------Open Pilot


Citizen #229
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: Zeal 210mm for Trex 250

Post by Tony »

Shame about the colours, not sure I would see the disk too well with red or green, would be interesting to see what their like outside Kev when you get the chance mate.
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
User avatar
Graham Lawrie
Moderator
Moderator
Posts: 5049
Joined: Thu Nov 06, 2014 7:14 pm
Location: Kinlochleven, Scotland
Contact:

Re: Zeal 210mm for Trex 250

Post by Graham Lawrie »

Mine are red and black:)
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius




CITIZEN # 521
Post Reply

Return to “Blades”